DoAll mdl. 2012-1A 20” Vertical Band Saw s/n 340-78413 w/ Blade Welder, 50-5200 FPM, 24” x 30 ½” Table (SOLD AS-IS - NO WARRANTY)

DoAll mdl. ML: 16” Vertical Band Saw s/n 5318133 w/ Blade Welder, 24” x 24” Table (SOLD AS-IS - NO WARRANTY)

Meber SR-700 Vertical Band Saw (SOLD AS-IS - NO WARRANTY)

2007 Birmingham BPV-3949C Vertical Mill s/n 073994 w/ Newall C80 Programmable DRO, 3Hp Motor, 60-4200 Dial Change RPM, Chrome Ways, Power Feed, 9”...

2006 Birmingham X6323A Vertical Mill s/n 063416 w/ Newall C80 Programmable DRO, 3Hp Motor, 60-4200 Dial Change RPM, Chrome Ways, 9” x 49” Table (S...

Lagun Vertical Mill w/ Dial Change RPM, Chrome Ways9" x 48" Table (SOLD AS-IS - NO WARRANTY)

Lagun FT-2 Vertical Mill w/ 55-2940 RPM, 8-Speeds, Chrome Ways, Power Feed, 9” x 48” Table (SOLD AS-IS - NO WARRANTY) ...[more]

Lagun FT-1 Vertical Mill w/ Anilam Wizard DRO, 55-2940 RPM, 8-Speeds, 9” x 42” Table (SOLD AS-IS - NO WARRANTY) ...[more]

Bridgeport Vertical Mill w/ 1Hp Motor, 80-2720 RPM, 8-Speeds, 11” Riser, 9” x 42” Table (SOLD AS-IS - NO WARRANTY) ...[more]

Supermax 3-Axis CNC Vertical Mill w/ Anilam Crusader II Controls, 60-4200 Dial Change RPM, Power Draw-Bar, Box Ways, 9” x 49” Table (SOLD AS-IS - ...

Acra FEL-2060GNX 20” x 60” Geared Head Gap Bed Lathe w/ 32-1500 RPM, 3 1/8” Thru Spindle Bore. Inch/mm Threading, Tailstock, 13” 3-Jaw Chuck (SOLD...

Tuda TudoMax 19X51 19” x 51” Geared Head Gap Bed Lathe w/ 25-1800 RPM, 3” Thru Spindle Bore, Inch/mm Threading, Tailstock, Indexing Tool Post, 16”...

Hwa Cheon 17”GX40 17” x 40” Geared Head Gap Bed Lathe w/ 32-1800 RPM, Inch Threading, Tailstock, 10” 3-Jaw Chuck (SOLD AS-IS - NO WARRANTY) ...[m...

Falcon Endmill Grinder s/n I5872003 w/ Air Fixture, Diamond Wheel (SOLD AS-IS - NO WARRANTY)

Louis Small Rockwell Hardness Tester (SOLD AS-IS - NO WARRANTY)

Emco “Maximat Mentor 10” Mill / Drill Machine w/ 60-2500 RPM (SOLD AS-IS - NO WARRANTY)

Brobo Style Miter Cold Saw w/ 2-Speeds (SOLD AS-IS - NO WARRANTY)

6" x 6" Hand Corner Notcher (NO BLADES) w/ Roll Stand (SOLD AS-IS - NO WARRANTY)

Willis-Bergo FS-1000 8” Column x 24” Radial Arm Drill w/ Power Column and Feeds, 17 ½” x 26” x 20” Tooling Fixture Block (SOLD AS-IS - NO WARRANTY...

Kysor Johnson mdl. R Horizontal Band Saw s/n 2828 w/ Manual Clamping (SOLD AS-IS - NO WARRANTY)

PMC “Work-A-Matic” 9” Vertical Band Saw w/ 18” x 29” Table (SOLD AS-IS - NO WARRANTY) ...[more]

Leland-Gifford No. 2LVS Variable Speed Deep Hole Drill w/ 30-1900 RPM, 25” x 37” Table (SOLD AS-IS - NO WARRANTY)

Pneumatic Tapping Arm (SOLD AS-IS - NO WARRANTY)

W.F. Wells W-9 9" Horizontal Band Saw s/n 924735 w/ Manual Clamping, Coolant (SOLD AS-IS - NO WARRANTY)

{ Group of lots: 26, 27, 28 } Harig Super 612 6” x 12” Surface Grinder w/ Walker Magnetic Chuck (SOLD AS-IS - NO WARRANTY)

{ Group of lots: 26, 27, 28 } Boyar Schultz Challenger H612 6” x 12” Surface Grinder w/ Walker Fine-Line Electromagnetic Chuck (SOLD AS-IS - NO W...

{ Group of lots: 26, 27, 28 } Boyar Schultz Challenger H612 6” x 12” Surface Grinder s/n 23094 w/ Magnalock Fine-Line Electromagnetic Chuck (SOLD...

Rockwell 12" Paliner w/ Stand (SOLD AS-IS - NO WARRANTY)

Rockwell 10" Unisaw Tilting Arbor Table Saw w/ T-Square Fence System (SOLD AS-IS - NO WARRANTY)

Aero Blast Dry Blast Cabinet (SOLD AS-IS - NO WARRANTY)

Cal-Cut 12" Table Saw w/ Fence System (SOLD AS-IS - NO WARRANTY)

Berco RTM 225A40 Crank Shaft Grinder s/n 553B w/ SWI Trak DRO, Motorized Work Head, 17 ½” x 36” Cap, Coolant (SOLD AS-IS - NO WARRANTY) ...[more]

Hines "Dominator" Crank Shaft Balance Driling Machine w/ Jet Drillling Head (SOLD AS-IS - NO WARRANTY) ...[more]

Paul-Munroe Hydraulics 4-Post Hot Stamping Press (SOLD AS-IS - NO WARRANTY) ...[more]

Weld Line Automation Systems Automated Seam Welder w/n MK2000A 300 Amp CV-CC Pulsed Welding Power Source, MK Cobramatic Wire Feeder, Motorized Hea...

{ Group of lots: 35C, 35D, 35E } Miller Deltaweld 451 CV-DC Arc Welding Power Source (SOLD AS-IS - NO WARRANTY) ...[more]

{ Group of lots: 35C, 35D, 35E } Miller Deltaweld 451 CV-DC Arc Welding Power Source (SOLD AS-IS - NO WARRANTY) ...[more]

{ Group of lots: 35C, 35D, 35E } Miller Deltaweld 450 CP-DC Arc Welding Power Source (SOLD AS-IS - NO WARRANTY) ...[more]

Steel Welding Table (SOLD AS-IS - NO WARRANTY) ...[more]

LeBlond 16” x 42” Geared Head Lathe w/ 50-1850 RPM, Inch Threading, Tailstock, 12” 4-Jaw Chuck (SOLD AS-IS - NO WARRANTY) ...[more]

Monarch 10EE Tool Room Lathe s/n 11142 w/ 2500 RPM, Inch Threading, Tailstock, KDK Tool Post, 3-Jaw Chuck (SOLD AS-IS - NO WARRANTY) ...[more]

Magnaflux Type DRA-60 Magnetic Particle Inspection Machine s/n 71400 w/ 16” Dia. Ring, 60” Length Cap (SOLD AS-IS - NO WARRANTY)

Storm-Vulcan mdl. 135 Crank Shaft Finishing Machine s/n 50-187 (SOLD AS-IS - NO WARRANTY)

DoAll 12" Hydraulic Horizontal Band Saw w/ Hydraulic Clamping (SOLD AS-IS - NO WARRANTY)

Powermatic Variable Speed Drill Press w/ 24” x 40” Table (SOLD AS-IS - NO WARRANTY)

1998 Daewoo PUMA 450A CNC Turning Center s/n PM450114 w/ Fanuc Series 0-T Controls, 12-Station Turret, Hydraulic Tailstock, 15” 3-Jaw Power Chuck,...

Okuma MX-60HB 2-Pallet 4-Axis CNC Horizontal Machining Center s/n 11020342 w/ Okuma OSP-U100M Controls, Tool Presetter, 60-Station ATC, CAT-50 Tap...

American GFM “AMS-20 CNC 6000” CNC Crank Shaft Milling Machine w/ CNC Controls (SOLD AS-IS - NO WARRANTY)

Acra FVMC-810 CNC Vertical Machining Center s/n V3013 w/ Mitsubishi Controls, 16-Station ATC, 40-Taper Spindle, 17 ½” x 39 ½” Table (SOLD AS-IS - ...

Kurt 6" Angle-Lock Vise (SOLD AS-IS - NO WARRANTY)

2000 Ganesh Deluxe GMV-3 3-Axis CNC Vertical Mill s/n 11617 w/ Anilam 3300 MK Controls, 100-5200 RPM, R8 Spindle, Power Draw-Bar, Chrome Box Ways,...

6" Angle-Lock Vise (SOLD AS-IS - NO WARRANTY)

2006 Atrump “A One” 3VK WVERTER 3-Axis CNC Vertical Mill s/n 95041 w/ Centroid Controls, Hand Wheel, R8 Spindle, Power Draw-Bar, Chrome Box Ways, ...

6" Angle-Lock Vise (SOLD AS-IS - NO WARRANTY)

{ Group of lots: 51, 52 } Fadal VMC4020HT 4-Axis CNC Vertical Machining Center s/n 8808659 (MISSING CONTROL BOARDS) w/ Fadal CNC88 Controls, 21-S...

{ Group of lots: 51, 52 } Kurt 6" Angle-Lock Vise (SOLD AS-IS - NO WARRANTY)

Hurco 3-Axis CNC Vertical Mill s/n SDX-8016074A w/ Centroid Controls, 60-4200 Dial RPM, 12” x 42” Table (SOLD AS-IS - NO WARRANTY) ...[more]

6" Angle-Lock Vise (SOLD AS-IS - NO WARRANTY)

Hobart Beta-MIG 250 Welding Power Source (SOLD AS-IS - NO WARRANTY)

{ Group of lots: 56, 57 } Ryobi Pedestal Grinder (SOLD AS-IS - NO WARRANTY) ...[more]