MFG N/A 10' FIBERGLASS FISHING BOAT WITH TRAILER
GLIDER 55 LBS ELECTRIC TROLLING MOTOR S/N: N/A
Bagging Bin Bagging Bin dimension is 6’x 6.6”x 3’5”= 5 cu.yd. capacity Lot Located in Bonners Ferry, ID
-- Seller Statement -- 1 1/2 x 6×36wc approximately 120ft.1 1/4-approxmently 260ft.3 rolls 1"×19×19 approximately 75ft per roll.1 roll of 5/8 appr...
-- Seller Statement -- Hand Crank. Like new condition. -- Contact -- Specialist: Daniel Miller, 440-321-5965.
-- Specifications -- Make: N/A.Model: N/A.Serial #: N/A.Size: 24”. -- Features -- Drive Type: Line-Shaft.Includes Pipe: no.Inlet Size: 9.5.Outlet ...
-- Seller Statement -- Pto drive 3 PTH -- Contact -- Specialist: Daniel Miller, 440-321-5965.
-- Seller Statement -- All Stainless Steel Hardware. -- Contact -- Specialist: Daniel Miller, 440-321-5965.
-- Seller Statement -- All Stainless Steel Hardware. -- Contact -- Specialist: Daniel Miller, 440-321-5965.
-- Seller Statement -- 16”Y, 21”to 16” & 14” Y, 2-16” 90 degrees elbows, 16” to triple8”, 18” pipe and 18”x31” to 21” round. Like new manual airlo...
-- Seller Statement -- 6 rolls 1/4” x 1200’, 5 rolls 1/4” x 1000’, 2 rolls 1/4” x 900’, 1 roll 1/4” x 850’, 2 rolls 7/16” x 400’, 1 roll 7/16” x 1...
-- Seller Statement -- 6 rolls 3/8” x 475’ and 26 rolls 3/8” x 600’ assorted colors. -- Contact -- Specialist: Daniel Miller, 440-321-5965.
-- Seller Statement -- All Stainless Steel Hardware. -- Contact -- Specialist: Daniel Miller, 440-321-5965.
-- Seller Statement -- All Stainless Steel Hardware. -- Contact -- Specialist: Daniel Miller, 440-321-5965.
-- Seller Statement -- One roll 51 inches wide, 3/8 inch thick. Rubber belting and 1 roll 41 inches wide by three eighth inch thick rubber belting...
-- Seller Statement -- All Stainless Steel Hardware. -- Contact -- Specialist: Daniel Miller, 440-321-5965.
-- Seller Statement -- 32 rolls 3/8” x 600’ assorted colors. -- Contact -- Specialist: Daniel Miller, 440-321-5965.
-- Seller Statement -- 2 inch 6×36 with approximately 190ft...1 inch 6 ws ×36 iwrc,approximately 200ft...1 inch 19×19 approximately 90ft.. -- Cont...
-- Seller Statement -- All Stainless Steel Hardware. -- Contact -- Specialist: Daniel Miller, 440-321-5965.
-- Seller Statement -- 36” x 36” approximately 29 pcs. Has some small square holes cut out. -- Contact -- Specialist: Daniel Miller, 440-321-5965.
-- Specifications -- Make: N/A.Model: N/A.Serial #: N/A.Size: 24”. -- Features -- Drive Type: Line-Shaft.Includes Pipe: no.Inlet Size: 9.5.Outlet ...
-- Seller Statement -- One roll 51 inches wide by 3/8 inch thick and one. roll 41 inches wide by three eighth inch thick. Rubber belting. -- Conta...
-- Seller Statement -- All Stainless Steel Hardware. -- Contact -- Specialist: Daniel Miller, 440-321-5965.
-- Seller Statement -- One roll 48 inches wide by half inch and three quarter inch thick. Used rubber belting. -- Contact -- Specialist: Daniel Mi...
-- Seller Statement -- 36” x 60” approximately 40” pcs. -- Contact -- Specialist: Daniel Miller, 440-321-5965.
-- Specifications -- Year: Unknown.Make: Kubota.Model: D622-E.Serial #: N/A.Fuel: Diesel.Meter Reads: 5836. -- Features -- Clutch: no.Voltage: 12....
-- Seller Statement -- 32 rolls 3/8” x 600’ assorted colors. -- Contact -- Specialist: Daniel Miller, 440-321-5965.
-- Seller Statement -- 48 Pcs, 3/4 inch, 4 foot by 8 foot tongue and groove CDX, plywood. Edges may be damaged. -- Contact -- Specialist: Daniel M...
-- Seller Statement -- Misc. round, flat, angle threaded and more. -- Contact -- Specialist: Daniel Miller, 440-321-5965.
-- Seller Statement -- Model DF-320-LF, S/N: DE-23109, 36”. -- Contact -- Specialist: Daniel Miller, 440-321-5965.
-- Seller Statement -- Hand Crank Tooth setter. Like New condition. -- Contact -- Specialist: Daniel Miller, 440-321-5965.
-- Seller Statement -- 14” to 20” diameter up to 24’. -- Contact -- Specialist: Daniel Miller, 440-321-5965.
-- Seller Statement -- 2 rolls 36 inches wide by 3/8 inch thick. Rubber belting. -- Contact -- Specialist: Daniel Miller, 440-321-5965.
-- Seller Statement -- All Stainless Steel Hardware. -- Contact -- Specialist: Daniel Miller, 440-321-5965.
-- Seller Statement -- Powered by a Honda GC 160 gas engine. -- Contact -- Specialist: Daniel Miller, 440-321-5965.
-- Seller Statement -- 32 rolls 3/8” x 500’ Assorted colors. -- Contact -- Specialist: Daniel Miller, 440-321-5965.
-- Seller Statement -- All Stainless Steel Hardware. -- Contact -- Specialist: Daniel Miller, 440-321-5965.
-- Seller Statement -- All Stainless Steel Hardware. -- Contact -- Specialist: Daniel Miller, 440-321-5965.
-- Seller Statement -- One roll 36 inches wide by half inch thick, Two rolls, 30 inches wide, 3/8 inch thick. Used rubber belting. -- Contact -- S...
-- Seller Statement -- QT Bale Single Spear. -- Contact -- Specialist: Dan W, 440-636-3128.
-- Seller Statement -- Model: HF19, S/N: 18595. 48” x 16” drum. 18” inlet and outlet. -- Contact -- Specialist: Daniel Miller, 440-321-5965.
-- Seller Statement -- 5' swing with frame. -- Contact -- Specialist: Daniel Miller, 440-321-5965.
-- Seller Statement -- Hawkline 7’ disc. 18” disc -- Contact -- Specialist: Daniel Miller, 440-321-5965.
-- Seller Statement -- 23 pieces, various sizes, 5 pieces 26' with 6/12 pitch. 2 pieces 26' with 6/12.1 pieces 26 with 6/12.1 piece 18'9"-6 pieces...
-- Seller Statement -- All Stainless Steel Hardware. -- Contact -- Specialist: Daniel Miller, 440-321-5965.
-- Seller Statement -- All Stainless Steel Hardware. -- Contact -- Specialist: Daniel Miller, 440-321-5965.
-- Seller Statement -- One roll 41 inches wide by 3/8 inch thick rubber belting. -- Contact -- Specialist: Daniel Miller, 440-321-5965.
-- Seller Statement -- 48 Pcs, 3/4 inch, 4 foot by 8 foot tongue and groove CDX, plywood. Edges may be damaged. -- Contact -- Specialist: Daniel M...
-- Seller Statement -- 17.5 R 25 -- Contact -- Specialist: Daniel Miller, 440-321-5965.
-- Seller Statement -- Model: C-12, Max. HP15, Max. Capacity 450 lbs.. Has 2 bench seats with 2 swivel seats attached and Minnkota Endurance 30 tr...
-- Seller Statement -- 24 Pcs, 3/4 inch, 4 foot by 8 foot tongue and groove CDX, plywood. Edges may be damaged. -- Contact -- Specialist: Daniel M...
-- Seller Statement -- All Stainless Steel Hardware. -- Contact -- Specialist: Daniel Miller, 440-321-5965.
-- Seller Statement -- Belt and pulley drive. -- Contact -- Specialist: Daniel Miller, 440-321-5965.
-- Seller Statement -- Mid-60s, S/N: 103820, Runs and drives. -- Contact -- Specialist: Daniel Miller, 440-321-5965.
-- Seller Statement -- All Stainless Steel Hardware. -- Contact -- Specialist: Daniel Miller, 440-321-5965.
-- Specifications -- Serial #: ALSMS046I889. -- Seller Statement -- Model 2000, 19’ long powered by a Volvo Pinto gas engine that is not running. ...
-- Seller Statement -- Two rolls 48 inches wide by half inch thick rubber belting. -- Contact -- Specialist: Daniel Miller, 440-321-5965.