Refine your search
Primary Category
Category
Brand
Item Type
- CNC Machine (12)
- Tool Holder (11)
- Caliper (10)
- Lathe (10)
- Toolholder (10)
- Taper (9)
- Tooling (9)
- CNC Lathe (8)
- Cart (7)
- Taper Tooling (7)
- Chuck (6)
- Vise (6)
- Drill (5)
- CNC Machining Center (4)
- Dial Caliper (4)
- Drill Bit (4)
- Face Plate (4)
- Machining Center (4)
- Spindle (4)
- Hold Down (3)
- T Slot Table (3)
- Tool Chest (3)
- Boring Bar (2)
- Horizontal Machining Center (2)
- Mill (2)
- Pallet Jack (2)
- Tool Changer (2)
- Turning Center (2)
- Vertical Machining Center (2)
- Wrench (2)
- Air Compressor (1)
- Air Dryer (1)
- Bench Drill (1)
- Cabinet (1)
- Carbide End Mills (1)
- Chip Conveyor (1)
- Collet (1)
- Comparator (1)
- Compressor (1)
- Cutter (1)
- Drill Press (1)
- Drum Fan (1)
- Electric Lift (1)
- End Mill (1)
- Fan (1)
- Gauge (1)
- Grinder (1)
- Heater (1)
- Material Handling Attachment (1)
- Optical Comparator (1)
- Plier (1)
- Rag (1)
- Rolling Cart (1)
- Screwdriver (1)
- Storage Cabinet (1)
- Tool Cart (1)
- Tool Sleeve (1)
- Twister (1)
- Wire and Cable (1)
State/Province
Town/City
- List
- Grid
-
91 item(s)/page
This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.
9” Dial Caliper (0-1) Brown and Sharp
small lot lol ring gages and no go gages
Fowler 12” Bench top Optical Comparator
2023 DN Solutions Mdl. HC400 II CNC Horizontal Machining Center SN/MH0001-001287, DN solutions/Fanuc Iseries plus cnc control, CAT 4O taper toolin...
2023 Kitamura Mycenter HX300iG/400 CNC Horizontal Machining Center, ONLY 300 HOURS 15,000 rpm Spindle, 2 pallet machine (400mm) Arumatik-MI CNC co...
2019 HURCO VM20i CNC Vertical Machining Center, S/NHVE1582, HURCO CNC, Control 12,000 RPM MAX .
2019 Hurco VM20L CNC Vertical Machining Center S/NHVE1582, Hurco CNC, Control 12,000 rpm max. RPM Spindle, CAT 40 taper tooling, 20 station side m...
2018 HURCO CNC Machine VMX24I MN/VMX24I SN/S243-1600718KFBAH Hurco cnc control, 12,000 max. RPM spindle, coolant system.
2021 Doosan Puma Gt2100 CNC Turning Center S/NML0228-002957 Doosan/Fanuc Iseries plus cnc contro 8-2 jaw chuck 12 station turret tail stock foot c...
2021 DOOSAN PUMA GT2100 CNC TURNING CENTER SN/ML0228-002958, Doosan/Fanuc Iseries Plus cnc control 8" 2 jaw chuck 12 station turret, tail stock fo...
OMNITURN GT-75 SERIES CNC LATHE with 184 hours SN/5012PTI MN/GT75HP
OMNITURN GT-76 SERIES 2 CNC LATHE WITH 172 HOURS SN/5016PI MN/GT-75HP
OMNITURN GT-76 SERIES 2 CNC LATHE WITH 168HOURS SN/4869 MN/GT-75HP
OMNITURN GT-75 SERIES 2 CNC LATHE
OMNITURN GT-76 SERIES 2 CNC LATHE
OMNITURN GT-76 SERIES 2 CNC LATHE
OMNITURN GT-76 SERIES 2 CNC LATHE With 14401 hours SN/4884 PTI MN/GT75HP
OVERBECK Mdl. LT-1BR Twister Speed Lathe, SN/6218R.
Ingersoll Rand TS4N5 Air Compressor, 5HP 80-GAL, Tank SN/NAR10693437
Drills, Grindes and a bench table
6” Kurt Vice MN/DX6-1-CA
{ Choice of lots: 34 } 6” Kurt Vice MN/DX6-1-CA
6” Kurt Vice MN/DX6-1-CA
{ Choice of lots: 35 } 6” Kurt Vice MN/DX6-1-CA
6” Kurt Vice MN/DX6-1-CA
{ Choice of lots: 36, 37, 38 } 6” Kurt Vice MN/DX6-1-CA
6” Kurt Vice MN/DX6-1-CA
{ Choice of lots: 36, 37, 38 } 6” Kurt Vice MN/DX6-1-CA
6” Kurt Vice MN/DX6-1-CA
{ Choice of lots: 36, 37, 38 } 6” Kurt Vice MN/DX6-1-CA
(6) Cat40 Taper tooling, (1) Face Plate, 1 Boring Bar and Taper Tooling and miscellaneous holders
(6) Cat40 Taper tooling, (1) Face Plate, 1 Boring Bar Taper Tooling and miscellaneous holders
(3) Cat40 with tool holders and (7) cat40 taper tooling
Cat40 taper tooling (10 total)
Cat40 taper tooling (10 total)
Cat40 taper tooling (10 total)
(3) Cat40 taper tooling with tool holders and drills (1 total)
Cat40 taper tooling with tool holders and drills (10 total)
Small lot of collets 6 large collets and the rest are all small collets
Small lot of tool holders with drills bits attached
Small lot of drills and doubled sided sink mills
Large lot of Carbide end mills and drills
Loading...-
91 item(s)/page