- List
- Grid
-
54 item(s)/page
This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.
Conair MT 10 ft. vacuum tank
Conair MT 10 ft. vacuum tank ...[more]
Conair MT 10 ft. vacuum tank
Conair MT 10 ft. vacuum tank ...[more]
Nokia Maillefer Extruder 80mm
80 mm, 32:1 L/D | Drive Power: 100 HP| Drive Speed: 1534 UpM | Output Speed: 120 UpM | Transmission: 12.79 | AC Motor | Mailefer Barrier Screw .....
HP: 100 | KW Cap: 118 | With SF: 1.25 | @Ext. RPM: 100 | Gear Ratio: 17.39 | Dyn. Thrust Cap: 408.300 lbs / 185.202 kg | Barrel Cooling: Air | AC ...
HP: 100 | 30:1 L/D | @Ext. RPM: 100 | Gear Ratio: 17.39 | Dyn. Thrust Cap: 408.300 lbs / 185.202 kg | Barrel Cooling: Air | AC Motor | Barrier Scr...
NRM 3.5" - 32:1 PM III Extruder
HP: 100 | SF: 1.25 | Oil Capacity: 12 Gal | Water Cooled | Vented Barrel | Two Stage Screw ...[more]
Conair MT 16 ft. Vacuum Tank
Pump Vacuum HP: 1.7 | Pump Water HP: 1.5 | FL. AMPS: 9.6 | Voltage: 460/3/60 ...[more]
NRM 2.5" - 30:1 PM III Extruder
HP: 50 HP | 30:1 L/D | RPM: 1750 | SF: 1.25 | Water Cooled
Davis Standard 2.5" - 30:1 L/D
HP: 40 | 30:1 L/D | Gear Ratio: 17.26 | SF: 1.25 | @EXTR. RPM: 52 | Air Cooled ...[more]
Nextrom 80mm NMB Extruder
HP: 75 DC Motor | Drive: 100 kW | input Speed: 1534 | Output Speed: 120 | Transmission Ratio: 12.8:1 | Water Cooled |Screw Type: Viviane | Diamete...
Nextrom 80mm NMB Extruder
HP: 75 DC Motor | Drive: 100 kW | input Speed: 1534 | Output Speed: 120 | Transmission Ratio: 12.8:1 | Water Cooled |Screw Type: Viviane | Diamete...
Full Load Current: 3.5 Amps| Voltage: 120/3.5/60 | 3 Component ...[more]
Full Load Current: 3.5 Amps| Voltage: 120/3.5/60 | 3 Component ...[more]
Full Load Current: 3.5 Amps| Voltage: 120/3.5/60 | 3 Component ...[more]
TEC Conveyor
Incline: 8 ft 5 in | Flatness: 3 ft | Cleated and Adjustable, with On/Off switch
5 HP Nelmor 1012 Granulator
HP: 5 | Throat Size: 10" x 12" | Top: 10" x 12" | Blades: 2 | Rotor: Open | Rpm: 1750 | Screen Size: 5/16" | Volts: 230/460 | **Location: Worceste...
5 HP Nelmor Granulator
Horsepower: 5 | Feed Throat Opening: 10" x 10" | Blades: (2) Slant, (2) Bed | Type of Rotor: Open | RPM: 1740 | Volts: 230/460 | Includes: Sound E...
5 HP Nelmor Granulator
Horsepower: 5 | Feed Throat Opening: 10" x 10" | Blades: (2) Slant, (2) Bed | Type of Rotor: Open | RPM: 1740 | Volts: 230/460 | Includes: Sound E...
Dimensions: 6 ft 8.5" | Cleated with On/Off switch and adjustable
5 Ton Mokon Water Cooled Chiller
Nominal Cooling Capacity: 5 Tons | Compressor Hp: 5Hp | Pump Hp: 1Hp | Min/Max Flow Rate (GPM): 12/30 | Tank Size: 20 Gal. | Fluid Temperature Ran...
10 Ton Mokon Water Cooled Chiller
Nominal Cooling Capacity: 10 Tons | Compressor Hp: 10Hp | Pump Hp: 1.5Hp | Min/Max Flow Rate (GPM): 24/35 | Tank Size: 20 Gal. | Fluid Temperature...
EMI Conveyors. Damaged:see photo
Width: 6 in | Length: 10 ft | On/Off Switch | Cleated
Throughput: 950 lbs/hr | Components: 4 | Batch Size: 5.5 | Bin Capacity Main Ingredient: 0.3 ft^3 | Voltage: 120/1/60 | **Location: Worcester, MA ...
Maximum Throughput: 900lb/h | Components: 3 | Slide Gate: 2 | Operating Air Pressure: 60-90psi | Air Consumption: 0.17cfm | Power Supply: 230vac -...
Maximum Throughput: 900lb/h | Components: 3 | Slide Gate: 2 | Operating Air Pressure: 60-90psi | Air Consumption: 0.17cfm | Power Supply: 230vac -...
20 HP AEC G1620 Granulator
Horsepower: 20 | Feed Opening: 16" x 20" | Blades: 3 Bed, 2 Rotar | Rotor: Open | Screen Size: 5/16" | RPM: 1760 | Volts: 230/460 | **Location: Wo...
50 HP Nelmor Granulator
Horse Power: 50 | Number of Rotating Knives: 10 | Bed Knives: 4 | Feed Throat Size: 21"x30" | Type: Closed Rotor System | Screen: 3/8" | Includes:...
Horsepower: 1.23 HP | Max Temp: 194°F | Max Pump Flow: 18 gpm | Max Cooling Capacity: 75 kW | Max Pressure: 78 psi | kW: 9.3 | Amps: 27 | Volts: 2...
Gatto Belt Puller
HP: 3 | Speed Range: 50:1 | Line Capacity: 5" Belt Opening | Centerline Height: 42"460 Volts | 12.5 Amps | 5 KVA | Single Phase ...[more]
Gatto Belt Puller
HP: 3 | Speed Range: 50:1 | Line Capacity: 5" Belt Opening | Centerline Height: 42"460 Volts | 12.5 Amps | 5 KVA | Single Phase ...[more]
Gatto Belt Puller
HP: 3 | Speed Range: 50:1 | Line Capacity: 5" Belt Opening | Centerline Height: 42"460 Volts | 12.5 Amps | 5 KVA | Single Phase | Dimensions: 55....
NRM 4.5" - 30:1 PM III Extruder
HP: 250 AC Motor 30:1 L/D | Grooved Barrel | Motor RPM: 1800 | Gear Ratio: 13.34:1 | SF: 1.25 | Water Cooled | Voltage: 460/3/60 | Largest Load: 3...
Ratio: 17.13 | Torque: 7000 | Temperature: 400°F | Specific Gravity: 0.75-0.94 | Viscosity: 1000000 - 5000000 CPS | Inlet Press: 1000 PSIG | Outle...
Ratio: 17.13 | Torque: 7000 | Temperature: 400°F | Specific Gravity: 0.75-0.94 | Viscosity: 1000000 - 5000000 CPS | Inlet Press: 1000 PSIG | Outle...
Clamping Force: 200 Tons | Inj. Capacity 23.9 in.cu | Control: PLCS 6 | Tie Bar Distance: 22.05" x 22.95" | Platen Size: 30.71" x 30.71" | Max Day...
US Tonnage: 720 | Shot Size: 194 oz | Tie Bar Spacing: 38.6" Sq.| Platen Size: 55.9" x 56.5" | Clamp Stroke: 53.1" | Min / Max Daylight: 17.7" / 7...
US Tonnage: 720 | Shot Size: 194 oz | Tie Bar Spacing: 38.6" Sq.| Platen Size: 55.9" x 56.5" | Clamp Stroke: 53.1" | Min / Max Daylight: 17.7" / 7...
US Tonnage: 360 | Shot Size Primary: 34.7 oz. | Shot Size Secondary: 34.7 oz. | Screw Diameters: 70mm/70mm | Distance Between Tie Bars: 28.34"x28....
US Tonnage: 309 | Shot Size: 23 oz | Tie Bar Spacing: 25.98"x25.98" | Platen Size: 36.22"x36.22" | Min/Max Mold Height: 9.84"/25.98" | Ejector Str...
Blister Pak Single
Amps: 12 | Voltage: 220/1/60 |Maximum Blister Seal Area: 14" wide x 18" long x 3-1/4" deep | Seal pressure of 2,900 lbs @ 100 psi ...[more]
Year: 2014 | Tonnage: 281 Tons | Shot Size: 33 oz. | Model: VCEF 2500/1000 bc II | | **Location: North Carolina | New: $249,000 ...[more]
-
54 item(s)/page