5
ABE 15bbl 4 Vessel Auto (Steam) w/ Touchscreen PLC
1/44
18,250
USD
Hackensack, New Jersey
0.00%
15.00%
Description
American Beer Equipment's Auto-Controlled Brewhouses are U.L. Certified at ABE's factory in Lincoln, Nebraska to ensure brewhouses meet all necessary safety standards. U.L. Certification minimizes installation time and in doing so, saves valuable capital on start-up costs.
-Since each brewhouse carries U.L. certification before it leaves the factory, local electricians will notice the U.L. marker and know they can safely begin their electrical installation without delay.
- SEW-EURODRIVE Gearmotor
- Full stainless steel work platform w safety railing and non-slip substrate
- Stainless steel brewhouse, piping, valves, clamps and fittings
- Sanitary Single Stage Heat Exchanger 150 sq. ft. surface area
Control System
- Fully automated with PLC and oversized touch screen display
- Brew recipe storage and recall
- Step mash program sequencing and recipe storage
- Pneumatic actuated fluid valve system
- Automatic steam valve controls (steam valves not included)
- Automatic temperature controls (brew house and cellar tanks)
- Variable frequency speed control on all pumps and motors
- Remote auger on/off control
- Iphone, Ipad or Explorer link application for remote monitoring and control of brew house
- Emergency Stop Safety Feature
Mash Tun
- Stainless steel grist hydrator w/ hot & cold hydration inlet
- Automatic mash mixing paddle (upper and lower paddle)
- Upper and lower steam jackets
- Fully insulated vessel
- Stainless Steel
- SS CIP High-flow Rotary Spray Ball with 360° of coverage.
- Interior light
- Top manway (tempered glass)
Mash Transfer Pump
- AMPCO Stainless Steel Washdown Pump
- VFD Speed Control Lauter Tun
- Fully insulated vessel
- Stainless Steel
- SS CIP High-flow Rotary Spray Ball with 360° of coverage.
- In line wort grant/sight glass with LED backlight
- Sparge ring assembly
- Interior light
- Top manway (tempered glass)
- Side Manway for automatic spent grain out process
- Automatic variable speed rake system and spent grain plow
Wort Pump
Whirlpool Pump
- AMPCO Stainless Steel Wash-down Pump
- VFD Speed Control
- Upper and lower steam jackets
- Top ventway (Ductwork to outside not included)
- Fully insulated vessel
- Stainless Steel
- SS CIP High-flow Rotary Spray Ball with 360° of coverage.
- Interior light
- Top manway (tempered glass)
Whirlpool Tank
- Tangential inlet
- Fully insulated vessel
- Stainless Steel
- SS CIP High-flow Rotary Spray Ball with 360° of coverage.
- Interior light
- Top manway (tempered glass)
Whirlpool Pump
- AMPCO Stainless Steel Washdown Pump
- VFD Speed Control
Brewhouse Tablet Holder
-The Brewhouse Tablet Holder is a 304 SS Shelf which attaches to the top of the control cabinet. LT Auto-Fill
Wort-Out
Wort Sampling Station
The wort sampling station comes with a water-cooled wort thief station, stainless steel sink w/ faucet hardware, integrates the vorlauf piping with a backlit sight glass and sample cock and has a hydrometer storage rack.
Automated Liquor Blending
Electronic Adjustable Rakes
- High and Low Limit Sensors
- 3/4 HP washdown motor
- Controlled by HMI & PLC
External Wort Grant
Features:
- Stainless steel cylinder 10" dia, 36" tall
- Total wort volume approx 11 gallons
- Total height 46" with tri-pod legs
- Hinged stainless steel cover
- Sight level glass
- Isolation valves
- Drain valve
- All 1.5" sanitary tri-clamp connections
External Wort Grant Automation Features:
- Automatic Level Control
- High and Low Pump Speed
- Wort Level Detection Probes
Hot/Cold Liquor Blending Assembly Features:
- 1.5" Hot liquor inlet
- 1.5" tri-clamp thermometer gauge
- 1.5" tri-clamp to 3/4" NPT cold water inlet
- Sanitary flow meter and totalizer for strike/sparge water
Flow Meter / Totalizer w/ Remote Display (Between MLT & KW)
Flow Meter / Totalizer
Stainless Steel
1.5" TC
Calibrated
5-50 gpm / 18.9 to 190 LPM
Ceramic Bearings
316 SS Rings
PVDF Rotor
Tungsten Carbide Shaft
Auction Details
Rigging/Removals
T&Cs & Important Info
Ask seller a question
American Beer Equipment's Auto-Controlled Brewhouses are U.L. Certified at ABE's factory in Lincoln, Nebraska to ensure brewhouses meet all necessary safety standards. U.L. Certification minimizes installation time and in doing so, saves valuable capital on start-up costs.
-Since each brewhouse carries U.L. certification before it leaves the factory, local electricians will notice the U.L. marker and know they can safely begin their electrical installation without delay.
- SEW-EURODRIVE Gearmotor
- Full stainless steel work platform w safety railing and non-slip substrate
- Stainless steel brewhouse, piping, valves, clamps and fittings
- Sanitary Single Stage Heat Exchanger 150 sq. ft. surface area
Control System
- Fully automated with PLC and oversized touch screen display
- Brew recipe storage and recall
- Step mash program sequencing and recipe storage
- Pneumatic actuated fluid valve system
- Automatic steam valve controls (steam valves not included)
- Automatic temperature controls (brew house and cellar tanks)
- Variable frequency speed control on all pumps and motors
- Remote auger on/off control
- Iphone, Ipad or Explorer link application for remote monitoring and control of brew house
- Emergency Stop Safety Feature
Mash Tun
- Stainless steel grist hydrator w/ hot & cold hydration inlet
- Automatic mash mixing paddle (upper and lower paddle)
- Upper and lower steam jackets
- Fully insulated vessel
- Stainless Steel
- SS CIP High-flow Rotary Spray Ball with 360° of coverage.
- Interior light
- Top manway (tempered glass)
Mash Transfer Pump
- AMPCO Stainless Steel Washdown Pump
- VFD Speed Control Lauter Tun
- Fully insulated vessel
- Stainless Steel
- SS CIP High-flow Rotary Spray Ball with 360° of coverage.
- In line wort grant/sight glass with LED backlight
- Sparge ring assembly
- Interior light
- Top manway (tempered glass)
- Side Manway for automatic spent grain out process
- Automatic variable speed rake system and spent grain plow
Wort Pump
Whirlpool Pump
- AMPCO Stainless Steel Wash-down Pump
- VFD Speed Control
- Upper and lower steam jackets
- Top ventway (Ductwork to outside not included)
- Fully insulated vessel
- Stainless Steel
- SS CIP High-flow Rotary Spray Ball with 360° of coverage.
- Interior light
- Top manway (tempered glass)
Whirlpool Tank
- Tangential inlet
- Fully insulated vessel
- Stainless Steel
- SS CIP High-flow Rotary Spray Ball with 360° of coverage.
- Interior light
- Top manway (tempered glass)
Whirlpool Pump
- AMPCO Stainless Steel Washdown Pump
- VFD Speed Control
Brewhouse Tablet Holder
-The Brewhouse Tablet Holder is a 304 SS Shelf which attaches to the top of the control cabinet. LT Auto-Fill
Wort-Out
Wort Sampling Station
The wort sampling station comes with a water-cooled wort thief station, stainless steel sink w/ faucet hardware, integrates the vorlauf piping with a backlit sight glass and sample cock and has a hydrometer storage rack.
Automated Liquor Blending
Electronic Adjustable Rakes
- High and Low Limit Sensors
- 3/4 HP washdown motor
- Controlled by HMI & PLC
External Wort Grant
Features:
- Stainless steel cylinder 10" dia, 36" tall
- Total wort volume approx 11 gallons
- Total height 46" with tri-pod legs
- Hinged stainless steel cover
- Sight level glass
- Isolation valves
- Drain valve
- All 1.5" sanitary tri-clamp connections
External Wort Grant Automation Features:
- Automatic Level Control
- High and Low Pump Speed
- Wort Level Detection Probes
Hot/Cold Liquor Blending Assembly Features:
- 1.5" Hot liquor inlet
- 1.5" tri-clamp thermometer gauge
- 1.5" tri-clamp to 3/4" NPT cold water inlet
- Sanitary flow meter and totalizer for strike/sparge water
Flow Meter / Totalizer w/ Remote Display (Between MLT & KW)
Flow Meter / Totalizer
Stainless Steel
1.5" TC
Calibrated
5-50 gpm / 18.9 to 190 LPM
Ceramic Bearings
316 SS Rings
PVDF Rotor
Tungsten Carbide Shaft
The Alementary Brewing Co. - 15 bbl Microbrewery, Canning Line & More.
Ends from
Venue Address
58 Voorhis Lane
Hackensack
New Jersey
07601
United States
Auctioneer does not ship. Bidders must make arrangements for their own safe removal within 7 days of auction. These are several riggers which attend our auctions regularly.
- IZZY Rigging - Martin (973) 886-5271
- A&J Enterprises - Tara Casternovia (908) 797-7263
- Pedowitz Machinery Movers - Ray Brunelle (917) 939-2975
- Hopatcong Rigging - Gary (973) 663-4103
Bidders of larger equipment, who chose not to enlist the services of a qualified and licensed machinery rigger will be required to provide a certificate of commercial liability insurance naming auctioneer additionally insured.
Important Information
Business Liquidation Auction
re: The Alementary Brewing Co.
American Beer Equipment (2018) Microbrewery Featuring:
A.B.E. 15 bbl, 4 Vessel, Automated, Steam Brewhouse (steam)
(12) 15 bbl & 30 bbl Fermentation Tanks
30 bbl & 60 bbl Brite Tanks
45 bbl Cold & Hot Liquor Tanks
Canning Line Components Consisting of:
CraftCan 35 Canning Line
Yellow Jacket Depalletizer
Switchback
Video Jet 1220 Date Coder
LabelMax 85 Can Labeler
Can-Scan System
Grist Mill
25' Flex Auger Conveyor
Keg Commander Automatic 2-Head Keg Washer
Columbia Steam Boiler
Glycol Chiller, Control System & Valves
Walk-In Cooler
Bulk Ingredients / Raw Materials
Quincy 10HP Rotary Screw Air Compressor
Toyota 3,000 lbs. Capacity LPG Forklift
Aichi 12' Vertical Mast Lift
Clarke Floor Cleaning Machine
& Much More.
Auction Format: Timed Online Auction
=====================================================
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
- Monday – Friday, 8:00 AM ET – 8:00 PM ET
Email: support@bidspotter.com
Office: 253-858-6777 Toll Free: 866-597-2437
Terms and Conditions
AUCTION FORMAT
Timed Online Auction w/ Staggered Close: Auction lots will close in a staggered format starting at 11am 30 to 60 seconds apart.
Bid Sniping Protection Enabled: In the event a bidder places a bid in the final moment, the close of that particular lot will be extended 30 to 60 seconds.
BUYER PREMIUM
15% Buyer Premium applies to any purchases made via the online bidding platform
SALES TAX
No Sales Tax applies.
REGISTRATION
A valid credit card is required in order to confirm bidders identity and will remain on file.
PAYMENT
Final Payment must be paid within 24 hours of auction. No Items can be removed until entire invoice is paid in full. Auctioneer reserves the right to resell buyer's lots if full payment is not made by 3PM next day.
FORMS OF PAYMENT
We accept cash, cashier's checks, wire transfer or credit cards (accepted on invoices under $3,000 & a 2.5% processing fee applies for credit card purchases.)
AS-IS, WHERE IS
All items are sold "as is, where is" without warranty or guarantee. Please inspect all items carefully before bidding. There will be no re-bids or rebates after an item is sold. This catalog is presented strictly as a guide and is subject to errors and omissions.
PICK UP
Bidders are responsible for the safe removal of their items within 7 days of auction. More time can be alotted bidders of larger equipment. Please speak to the auctioneer about more time if working within this timeline is an issue. Storage charges will be assessed for inventory which is not removed within 7 days of auction. After 30 days, items will be deemed abandoned by purchaser.
ALL SALES ARE FINAL
No returns or adjustments will be made after the auction. Bidders who elect to pay their balance by credit card understand an additional 3% convenience fee applies and agree to relinquish any and all rights to charge backs.
DISPUTES / DISCREPANCIES
Record of sale kept by the Auctioneer will be taken as final in the event of any dispute. In the event the auctioneer cannot release all or part of the lot, the extent of the auctioneer's responsibility will be to refund all monies paid in connection with the lot in question. No adjustments will be made to an invoice once the inventory leaves the premises.
LIABILITY
All persons attending, inspecting or removing merchandise assume all risks whatsoever of damage or loss to person and property and specifically release the Auctioneer and Seller formal liability therefore. Auctioneer and Seller shall not be liable by reason of any defect in condition of the merchandiser premises on which the sale is held. Auctioneer at his sole discretion may require insurance and/or the use of a commercial rigger based upon the level of difficulty removing a piece of equipment.
Additional Terms of Sale may be announced by auctioneer on day of auction and a bid signifies acceptance of these Terms of Sale.
