Lot

24

Cold Shot 5-Ton Commercial Water/Glycol Chiller System

In The Alementary Microbrewery - Part 2

This auction is live! You need to be registered and approved to bid at this auction.
You have been outbid. For the best chance of winning, increase your maximum bid.
Your bid or registration is pending approval with the auctioneer. Please check your email account for more details.
Unfortunately, your registration has been declined by the auctioneer. You can contact the auctioneer on 908-789-9999 for more information.
You are the current highest bidder! To be sure to win, come back on as the lot closes or increase your max bid.
Leave a bid now! Your registration has been successful.
Sorry, bidding has ended on this item. We have thousands of new lots everyday, start a new search.
Bidding on this auction has not started. Please register now so you are approved to bid when auction starts.
1/5
Cold Shot 5-Ton Commercial Water/Glycol Chiller System - Image 1 of 5
Cold Shot 5-Ton Commercial Water/Glycol Chiller System - Image 2 of 5
Cold Shot 5-Ton Commercial Water/Glycol Chiller System - Image 3 of 5
Cold Shot 5-Ton Commercial Water/Glycol Chiller System - Image 4 of 5
Cold Shot 5-Ton Commercial Water/Glycol Chiller System - Image 5 of 5
Cold Shot 5-Ton Commercial Water/Glycol Chiller System - Image 1 of 5
Cold Shot 5-Ton Commercial Water/Glycol Chiller System - Image 2 of 5
Cold Shot 5-Ton Commercial Water/Glycol Chiller System - Image 3 of 5
Cold Shot 5-Ton Commercial Water/Glycol Chiller System - Image 4 of 5
Cold Shot 5-Ton Commercial Water/Glycol Chiller System - Image 5 of 5
500 USD
Hackensack, New Jersey
0.00%
15.00%
Model: ACWC-060-E-DR-LT-M20-5 , Serial: M012715-1 System Features:
To provide approximately 60,000 Btu/hr. of cooling with 50.F leaving fluid temperature with an ambient temperature of 95.F.
Low Ambient Kit Good to -20F Controls
Electronic temperature controller with constant (set point & process) temperature readout on standard units, actual and programmed temperature LED readout. Refrigeration Components
Efficient scroll compressors, sight glass/moisture indicators, balance port expansion valves, filter drier, service valves, stainless steel brazed plate evaporator, fan cycling head pressure controls, and low ambient controls. Process Fluid Components
Stainless steel centrifugal pump, bronze "Y" strainer with 20 mesh stainless steel screen, insulated stainless steel reservoir with shoe box lid. Safety Controls
High/low pressure safeties, low water flow switch, internal and/or thermal overloads for compressor and fan motors, safety fuses for pump. Construction
Welded steel powder coated frame and cabinet, copper piping connections. Fluid Connections
1" NPT Male Outlet
3/4" NPT Female Inlet Compressor
5 H.P. Hermetic Scroll (Copeland Brand) Evaporator
Stanless steel / Copper brazed Condenser Fan
3500 CFM PROCESS SUPPLY PUMP
Standard Pump
1 H.P.
Output 30gpm @ 30psi Reservoir
25 GALLON
304ss
Reservoir Insulated Condenser Coil
Air Cooled
Designed for industrial use
Copper Tube, Aluminim Fin Power Requirements
208/230 VOLT
3 Ph
Minimum service required
27 amps
Or 460 VOLT 3 Ph
Minimum service required
15 amps Unit Dimensions
44" L x 32" W x 59-1/2" H Unit Weight
500lbs Empty
Model: ACWC-060-E-DR-LT-M20-5 , Serial: M012715-1 System Features:
To provide approximately 60,000 Btu/hr. of cooling with 50.F leaving fluid temperature with an ambient temperature of 95.F.
Low Ambient Kit Good to -20F Controls
Electronic temperature controller with constant (set point & process) temperature readout on standard units, actual and programmed temperature LED readout. Refrigeration Components
Efficient scroll compressors, sight glass/moisture indicators, balance port expansion valves, filter drier, service valves, stainless steel brazed plate evaporator, fan cycling head pressure controls, and low ambient controls. Process Fluid Components
Stainless steel centrifugal pump, bronze "Y" strainer with 20 mesh stainless steel screen, insulated stainless steel reservoir with shoe box lid. Safety Controls
High/low pressure safeties, low water flow switch, internal and/or thermal overloads for compressor and fan motors, safety fuses for pump. Construction
Welded steel powder coated frame and cabinet, copper piping connections. Fluid Connections
1" NPT Male Outlet
3/4" NPT Female Inlet Compressor
5 H.P. Hermetic Scroll (Copeland Brand) Evaporator
Stanless steel / Copper brazed Condenser Fan
3500 CFM PROCESS SUPPLY PUMP
Standard Pump
1 H.P.
Output 30gpm @ 30psi Reservoir
25 GALLON
304ss
Reservoir Insulated Condenser Coil
Air Cooled
Designed for industrial use
Copper Tube, Aluminim Fin Power Requirements
208/230 VOLT
3 Ph
Minimum service required
27 amps
Or 460 VOLT 3 Ph
Minimum service required
15 amps Unit Dimensions
44" L x 32" W x 59-1/2" H Unit Weight
500lbs Empty

The Alementary Microbrewery - Part 2

Ends from
Venue Address
58 Voorhis Lane
Hackensack
New Jersey
07601
United States

Auctioneer does not ship. Bidders must make arrangements for their own safe removal within 7 days of auction. These are several riggers which attend our auctions regularly.

IZZY Rigging - Martin (973) 886-5271
A&J Enterprises - Tara Casternovia (908) 797-7263
Pedowitz Machinery Movers - Ray Brunelle (917) 939-2975
Hopatcong Rigging - Gary (973) 663-4103

Important Information

Business Liquidation Auction
re:  The Alementary Brewing Co.

  • Brewhouse - 7 BBL 3 Vessel Semi-Auto (Steam)
  • 10bbl Hot Liquor Tank
  • (3) A.B.E. 7bbl Stainless Steel Fermentation Tank
  • Deutsche 7bbl Stainless Steel Fermentation Tank
  • Cold Shot 5-Ton Commercial Water/Glycol Chiller System
  • UV/VIS Spectrophotometer
  • Grist Mil 1,200 lbs/hr Crackling Capacity
  • 25' Flex Auger System
  • H.B. Smith 19HE-04 Cast Iron Natural Gas Boiler
  • A.B.E. Heat Exchanger
  • 5 cu. ft. Commercial Carbon Filter
  • Portable Transfer Pump System 1.5 hp
  • Glycol Temperature Control Panel w/(3) RTD Sensors 
  • A Group of S/S Aeration Fittings and Valves
  • & Much More.

Auction Format:  Timed Online Auction

 

 

 

 

 

=====================================================

BidSpotter Customer Service Support Department 

Have a question pertaining to the bidding process? 

Visit our Frequently Asked Questions!  

You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here

Customer Support Hours:

  • Monday – Friday, 8:00 AM ET – 8:00 PM ET

Email: support@bidspotter.com

Office: 253-858-6777 Toll Free: 866-597-2437

Frequently Asked Questions

Terms and Conditions

AUCTION FORMAT
     Timed Online Auction w/ Staggered Close:  Auction lots will close in a staggered format starting at 11am 30 to 60 seconds apart. 
     Bid Sniping Protection Enabled:  In the event a bidder places a bid in the final moment, the close of that particular lot will be extended 30 to 60 seconds. 

BUYER PREMIUM
     15% Buyer Premium applies to any purchases made via the online bidding platform

SALES TAX
     No Sales Tax.

REGISTRATION
     A valid credit card is required in order to confirm bidders identity and will remain on file.

PAYMENT
     Final Payment must be paid within 24 hours of auction. No Items can be removed until entire invoice is paid in full. Auctioneer reserves the right to resell buyer's lots if full payment is not made by 3PM next day.

FORMS OF PAYMENT
     We accept cash, cashier's checks or credit cards (up to $3,000 & a 3% processing fee applies for credit card purchases.)

AS-IS, WHERE IS
     All items are sold "as is, where is" without warranty or guarantee. Please inspect all items carefully before bidding. There will be no re-bids or rebates after an item is sold. This catalog is presented strictly as a guide and is subject to errors and omissions.

PICK UP
     Bidders are responsible for the safe removal of their items within 72 hours of auction.  Please speak to the auctioneer about more time if working within this timeline is an issue.  Storage charges will be assessed for inventory which is not removed within 7 days of auction.  After 30 days, items will be deemed abandoned to auctioneer by purchaser.

ALL SALES ARE FINAL
     No returns or adjustments will be made after the auction. Bidders who elect to pay their balance by credit card understand an additional 3% convenience fee applies and agree to relinquish any and all rights to charge backs.

DISPUTES / DISCREPANCIES
     Record of sale kept by the Auctioneer will be taken as final in the event of any dispute. In the event the auctioneer cannot release all or part of the lot, the extent of the auctioneer's responsibility will be to refund all monies paid in connection with the lot in question. Auctioneer records the sale by voice recorder. No adjustments will be made to an invoice once the inventory leaves the premises.

LIABILITY
     All persons attending, inspecting or removing merchandise assume all risks whatsoever of damage or loss to person and property and specifically release the Auctioneer and Seller formal liability therefore. Auctioneer and Seller shall not be liable by reason of any defect in condition of the merchandiser premises on which the sale is held. Auctioneer at his sole discretion may require insurance and/or the use of a commercial rigger based upon the level of difficulty removing a piece of equipment.

Additional Terms of Sale may be announced by auctioneer on day of auction and a bid signifies acceptance of these Terms of Sale.

See Full Terms And Conditions