CBD & Hemp extraction, material handling, air compressors, mills, Fran Rica scrape surface heat exchanger, Stein breader, pumps, valves, d
You’re currently pending approval by the auctioneer. In the meantime you can continue to place bids from the lot page which will be accepted once you’re approved.
363 item(s)
  • List
  • Grid
  • 363 item(s)
    /page

This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.

Sampson B5 stainless steel 6 in. segmented air operated b valve, v-b, DN 150/ DN 6 in. 4408 / CF8M, EIA-0681-S80-A00, PS: max.8 bar (116 psi) --- ...

set 100 psi, type: 26 KA 10L - 120 / 84, cap 530 gpm Located in Hollister, CA {Rigging Fee: $20}

Fabri pneumatic valve size 6 in. 150 cwp- 20F150F knife gate valve Located in Hollister, CA {Rigging Fee: $20} ...[more]

keystone 8 in. knife gate valve CF8M, F952-8 in. / F952-200 mm,, 150 psi, trim 170 Located in Hollister, CA {Rigging Fee: $20}

Fabri 8 in. knife gate valve CF8M, S/N 032264, fig and mtl C37S304, wp and temp 150 C 32F-150F Located in Hollister, CA {Rigging Fee: $20}

(2) Avco CF8M 6 in. air actuated knife gate valve - EACH Located in Hollister, CA {Rigging Fee: $25 EACH}

(2) Avco CF8M 6inch air actuated knife gate valve - EACH Located in Hollister, CA {Rigging Fee: $20}

(3) Fabri 4 in. knife gate valve, fig and mtl 37R304, WP and temp 150 C 32F-150F, - EACH Located in Hollister, CA {Rigging Fee: $20}

(2) Fabri 4 in. size knife gate valve, valve 01 S/N 094102, FIG and MTL 37R304, WP and temp 150 cwp 32F-150F, valve 02 S/N 25326-A, MTL 304, WP 15...

(2) Fabri CF8-A / CF8M size 4 in. knife gate valve FV1250 and Rovalve CF8 size 4 in. knife gate valve S17 descrip - EACH Located in Hollister, CA ...

(2) Fabri valve 12 in. knife gate valve, 37-R type 304, 150 cwp valves and a part - EACH Located in Hollister, CA {Rigging Fee: $20}

Fabri valve knife gate valves size 6 in., 37-R, 304, 150 wp Located in Hollister, CA {Rigging Fee: $20}

Fabri valve size 8 in. knife gate valves C37S304, 150 cwp Located in Hollister, CA {Rigging Fee: $20}

Fabri valve 22R type of material 316 working pressure 125 knife gate valve Located in Hollister, CA {Rigging Fee: $20}

Fabri valve size 6 in. knife gate valve C37S316V, 150 cwp, air actuated stainless steel knife valve with flowserve flow control accord Located in ...

pneumatic Milwaukee controls stainless steel butterfly valve 316 stainless steel, ansi 150, A-24664 Located in Hollister, CA {Rigging Fee: $20}

3 in. Johnson rotary steam joint with piping Located in Hollister, CA {Rigging Fee: $20}

Barber Colman actuator MA-418-0-0-3 120 v Located in Hollister, CA {Rigging Fee: $20}

Stockholm 3 in. gate valve #1061-10, 200 cwp Located in Hollister, CA {Rigging Fee: $20}

2 in. Sensus brass water meter with electric butterfly valve Located in Hollister, CA {Rigging Fee: $20}

Fisher type 478-U air operated stainless steel ball valve Located in Hollister, CA {Rigging Fee: $20}

Fisher controls air operated 2 in. 9510 diaphragm 175 psi valve. flange drilling 125 ansi, design temp 70 F, Tag LV-209 Located in Hollister, CA {...

Masoneilan dresser ball valve 4 in. model 35-35212 CV 230 rating ansi 150 B16 34 Located in Hollister, CA {Rigging Fee: $20}

hand operated butterfly valve with air operated butterfly valve with 4 in. flange food grade valves, stainless steel contact Located in Hollister,...

(7) hand operated butterfly valves - EACH Located in Hollister, CA {Rigging Fee: $20}

(7) 3 in. butterfly valves - EACH Located in Hollister, CA {Rigging Fee: $20}

(4) pneumatic and hand operated butterfly valves - EACH Located in Hollister, CA {Rigging Fee: $20}

(9) Gemu way valve 2 in. pvc psi 150 - EACH Located in Hollister, CA {Rigging Fee: $20}

Waukesha 10 hp gear drive for positive displacement pump Located in Hollister, CA {Rigging Fee: $50 - Dunnage POR}

(2) Tonkaflo pumps stainless steel 8504G-7080 with control panel, maximum liquid temperature 125 F - EACH Located in Hollister, CA {Rigging Fee: $...

Cherry-Burrell tri-clover 4EH style bow tie pump 4 in. in 3 in. out Located in Hollister, CA {Rigging Fee: $50 - Dunnage/Pet POR}

Cherry-Burrell stainless steel tri-clover 4EH style bow tie pump 4 in. in 3 in. out, stainless steel sanitary fittings Located in Hollister, CA {R...

Moyno pump 3 type stainless steel frame iloa form UT Serial A-1134-1 Located in Hollister, CA {Rigging Fee: $25}

Chemineer agitator drive 10.028 3 hp 1145 rpm 230/460 v Located in Hollister, CA {Rigging Fee: $30 - Dunnage/Pet POR}

3 inch trash pump 10hp 230/460 v 1755 rpm Located in Hollister, CA {Rigging Fee: $35 - Dunnage/Pet POR}

3 in. 15hp trash pump Located in Hollister, CA {Rigging Fee: $35 - Dunnage/Pet POR}

Moyno pump stators , different sizes Located in Hollister, CA {Rigging Fee: $25}

US motor synchro gear model gdp ratio 6.19 hp 5 unmount 125 1745 rpm 208-230-460 1- 9/16X 3 in. shaft Located in Hollister, CA {Rigging Fee: $20}

Baldor 3.5 hp centrifugal pump 3450 rpm motor 208-2 30-460 3-phase Located in Hollister, CA {Rigging Fee: $20}

Secoma high volume blower for drying or fluid beds with a Brooks Hansen high rpm 440 v 3 phase motor Located in Hollister, CA {Rigging Fee: $20}

Neptune flow meter register model 432 with 2 in. valve Located in Hollister, CA {Rigging Fee: $20}

Continental Hydraulics power unit polypac system center with Leeson model N184T17F01F, rpm 1740, hp 5, 460 V. Located in Hollister, CA {Rigging Fe...

hydraulic power unit Leroy Somer 184TC, 5 hp, 1730 rpm, 3PH, 208/230/460 V Located in Hollister, CA {Rigging Fee: $20}

hydraulic power unit Leroy Somer 184TC, 5 hp, 208/230/460 Volt Located in Hollister, CA {Rigging Fee: $20}

(3) manual hydrualic pump, piston stroke - EACH Located in Hollister, CA {Rigging Fee: $20}

(3) manual hydrualic pump, piston stroke - EACH Located in Hollister, CA {Rigging Fee: $20}

(4) manual hydrualic pump, piston stroke - EACH Located in Hollister, CA {Rigging Fee: $20}

manual oil pump Located in Hollister, CA {Rigging Fee: $20}

hydraulic power unit with tank filter hoses hydraulic motor gear head and bi-directional 120 v valves Located in Hollister, CA {Rigging Fee: $25 -...

electric hydraulic control center station Located in Hollister, CA {Rigging Fee: $25 - Dunnage/Pet POR}

hydraulic arms and hoses for Amerio plate freezer Located in Hollister, CA {Rigging Fee: $50 - Dunnage/Pet POR}

refrigerant management system for r12 and 134a Located in Hollister, CA {Rigging Fee: $25 - Dunnage/Pet POR}

after cooler with fan Located in Hollister, CA {Rigging Fee: $35 - Dunnage/Pet POR}

(12) Eriez style 4 in. x 54 in. electromagnets 12 - 36 v bar magnets suspend over belts for iron or under forklift for nails and metal trash power...

speed controller with Nema hoffman closure panel control transformer with switches. includes two A.C. drive MC07A005-5A3-4-00 manufactured by Sew ...

(6) formers, form and fill tube for Rovema vpu 220, serial # 51281 form fill seal - EACH Located in Hollister, CA {Rigging Fee: $20 - Dunnage/Pet ...

Intralox conveyor belt 18 in. x 15 ft. Located in Hollister, CA {Rigging Fee: $20}

electric water pump with filter and Griswold centrifugal separator model 2T style threaded with 3 hp Leeson 3450 rpm pump Located in Hollister, CA...

Cornell pump model 4NMP-F5 7.5 hp. 3 phase open impeller pump capable of pumping whole products without damage. like flowers or buds Located in Ho...

iced bubble hash system for cannabis/hemp. 39 in. deep x 29 in. diameter and 36 in. x 30 in. x 29 in. deep stainless steel tanks. Located in Holli...

Loading...Loading...
  • 363 item(s)
    /page

Recently Viewed Lots