Newport - 1 gal. ketchup line from kitchen to canning; Dickson - raw/cooked meat; Omaha - lab and high end kitchen equip; Fennville, - 16 head scale
You’re currently pending approval by the auctioneer. In the meantime you can continue to place bids from the lot page which will be accepted once you’re approved.
375 item(s)
  • List
  • Grid
  • 375 item(s)
    /page

This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.

stainless steel conveyor, 80 in. x 19 in. x 48 in., white belt, stainless steel wash down motor - Located in Dickson, TN { Rigging Fee: $500 } .....

Bridge stainless steel 400 lb. tote dump, model LL-96 on wheels (totes are sold separately in lot 65 )- Located in Dickson, TN { Rigging Fee: $500...

Bridge stainless steel conveyor, 90 in. x 19 in. x 40 in. - Located in Dickson, TN { Rigging Fee: $500 }

Ultra-freeze Cryogenic freeze tunnel, model 30-4-3T, sn 30-419, CO2 cooled, 27 ft. x 32 in., 4-zone, 3-pass - Located in Dickson, TN { Rigging Fee...

stainless steel rotary accumulation table, 42 in. diameter, 33 in. tall - Located in Dickson, TN { Rigging Fee: $150 }

stainless steel conveyor, 38 in. x 8 in., with stainless steel wash down motor - Located in Dickson, TN { Rigging Fee: $100 }

Best Flex conveyor - Located in Dickson, TN { Rigging Fee: $50 }

Strong Arm stainless steel wall cabinet, no HMI - Located in Dickson, TN { Rigging Fee: $50 }

Cozzini stainless steel tote dump, with hydraulic pump, 70 in. dump height - Located in Dickson, TN { Rigging Fee: $400 }

Cotterman aluminum narrow 5-step rolling ladder, 16 in. wide - Located in Dickson, TN { Rigging Fee: $25 } ...[more]

Cozzini stainless steel screw auger feeder model CSI2500, 88 in. long x 34 in. deep, with incline screw feeder 12 ft. x 18 in. - Located in Dickso...

stainless steel 5-step platform, 72 in. x 24 in. x 48 in. - Located in Dickson, TN { Rigging Fee: $150 }

Formax Magnum 700 patty former, model M-700, sn F6K790k, with (2) carts and dies - Located in Dickson, TN { Rigging Fee: $2000 }

Formax feed conveyor, shuttle end, 70 in. x 36 in. x 48 in. tall, stainless steel wire belt - Located in Dickson, TN { Rigging Fee: $500 }

white belt conveyor with wash down motor, goes through wall, 108 in. x 36 in. x 42 in., on wheels with track on floor - Located in Dickson, TN { R...

outfeed conveyor from oven to carmelizer, 72 in. x 39 in, washdown motor and drive - Located in Dickson, TN { Rigging Fee: $250 }

Caswell holding tank pump, with waterfall carmelizer, conveyor 36 in. x 39 in. - Located in Dickson, TN { Rigging Fee: $500 }

stainless steel spiral patty freezer with control panel, 33 ft. x 28 ft. 16 ft. tall overall, 40 in. wide plastic belt, 3 in. clear space, 21 tier...

Ecolab CIP sanitation controller for spiral, model 5600- Located in Dickson, TN { Rigging Fee: $500 } ...[more]

Fastback shaker conveyor outfeed, dimple stainless steel, 10 ft. x 24 in. - Located in Dickson, TN { Rigging Fee: $750 }

stainless steel incline conveyor, 8 ft. tall, blue belt, 30 in. width - Located in Dickson, TN { Rigging Fee: $1000 }

Fastback dimple stainless steel conveyor, 8 ft. x 16 in., into scale - Located in Dickson, TN { Rigging Fee: $750 }

2011 Heat and Control, 14-bucket scale, model CCW-R-214-W-1-S/70-WP-H, dimple buckets, with control panel - Located in Dickson, TN { Rigging Fee: ...

CEIA flow through metal detector - Located in Dickson, TN { Rigging Fee: $250 }

tub conveyor filler with bidirectional conveyor 8 ft. - Located in Dickson, TN { Rigging Fee: $500 }

stainless steel mezzanine for scale, 10 ft. x 10 ft., with L-shape 10 ft. x 20 ft. welded, Lapeyre stairs - Located in Dickson, TN { Rigging Fee: ...

Reitz stainless steel twin screw blender, 2-drive, jacketed, 64 in. x 46 in. x 32 in. - Located in Dickson, TN { Rigging Fee: $750 }

stainless steel platform on blender, 3-step, 48 in. x 36 in. x 30 in. - Located in Dickson, TN { Rigging Fee: $150 }

(8) 400 lb. stainless steel carts, 24 in. x 24 in. x 24 in. - Located in Dickson, TN { Rigging Fee: $200 } ...[more]

galvanized drive in style pallet rack, 42 in. wide opening, 6-bays, 3-deep, 4-tall - Located in Dickson, TN { Rigging Fee: $1500 }

galvanized drive in style pallet rack, 42 in. wide opening, 6-bays, 2-deep, 4-tall - Located in Dickson, TN { Rigging Fee: $1500 }

Urschel slicer, model J-A, sn 634, with shields, on wheels - Located in Dickson, TN { Rigging Fee: $250 }

stainless steel spiral gravy in bag freezer with control panel, 21 ft. x 31 ft. 16 ft. tall overall, 34 in. wide plastic belt, 3 in. clear space, ...

Ecolab CIP controller for freezer, model S-6000- Located in Dickson, TN { Rigging Fee: $500 } ...[more]

stainless steel conveyor, 17 ft. x 12 in., stainless steel wash down motor, suspended from ceiling - Located in Dickson, TN { Rigging Fee: $750 }

stainless steel spiral decline outfeed conveyor, 8 ft. top, x 5 ft. decline, 30 in. wide white plastic flighted belt - Located in Dickson, TN { Ri...

stainless steel decline conveyor, 4 ft. x 4 ft. x 12 in. wide - Located in Dickson, TN { Rigging Fee: $750 }

7-step stainless steel platform, green poly deck - Located in Dickson, TN { Rigging Fee: $250 }

stainless steel table, 42 in. x 24 in. x 29 in. tall - Located in Dickson, TN { Rigging Fee: $20 }

stainless steel Strong Arm pedestal - HMI NOT INCLUDED - Located in Dickson, TN { Rigging Fee: $50 }

stainless steel table, 42 in. x 24 in. x 36 in. tall, on wheels - Located in Dickson, TN { Rigging Fee: $20 }

stainless steel table, 36 in. x 36 in. x 35 in. tall - Located in Dickson, TN { Rigging Fee: $20 }

stainless steel table, 42 in. x 24 in. x 30 in. tall, adjustable legs - Located in Dickson, TN { Rigging Fee: $20 }

stainless steel Strong Arm pedestal - HMI NOT INCLUDED - Located in Dickson, TN { Rigging Fee: $50 }

Cotterman stainless steel 3-step rolling ladder - Located in Dickson, TN { Rigging Fee: $10 }

(1) stainless steel table 72 in. x 24 in. x 30 in. tall; (1) stainless steel table 48 in. x 24 in. x 28 in. tall - EACH - Located in Dickson, TN {...

stainless steel Strong Arm pedestal - HMI NOT INCLUDED - Located in Dickson, TN { Rigging Fee: $50 }

2005 Deville stainless steel chopper, model Flexifam, sn 5103-6265, was chopping sausage patties into crumbles, with stainless steel incline conve...

(2) gearboxes for patty or gravy freezers - Located in Dickson, TN { Rigging Fee: $50 }

Strong Arm pedestal, no HMI- Located in Dickson, TN { Rigging Fee: $100 }

stainless steel deaerator tank, 60 in. dia. X 96 in tall, dish bottom, on legs., #27- Located in Newport, TN { Rigging Fee: $1500 }

stainless steel deaerator tank, 60 in. dia. X 96 in tall, dish bottom, on legs., #28 - Located in Newport, TN { Rigging Fee: $1500 }

2010 Lee steam jacketed 3,000 gallon ketchup 316L stainless steel mix tank, model 3000U9MS, sn 62232-1-2, NB 11834, MAWP jacket 125 psi @ 353 deg....

2010 Lee steam jacketed 3,000 gallon ketchup 316L stainless steel mix tank, model 3000U9MS, sn 62232-1-1, NB 11834, MAWP jacket 125 psi @ 353 deg....

2016 centrifugal pump model WS+44/50 and motor - Located in Newport, TN { Rigging Fee: $150 }

Lot 430

hot water skid

hot water skid condensate tank - Located in Newport, TN { Rigging Fee: $300 }

2016 SPX positive displacement pump, model 220-U2, drive, 20 hp motor, 4 in flange - Located in Newport, TN { Rigging Fee: $200 }

2017 centrifugal pump model WS+44/50 and 25 hp motor - Located in Newport, TN { Rigging Fee: $150 }

(2) stainless steel strainers, 8 in. x 36 in. long, 4 in. sanitary fittings - EACH - Located in Newport, TN { Rigging Fee: $200 }

CIP diverter manifold - Located in Newport, TN { Rigging Fee: $150 }

Loading...Loading...
  • 375 item(s)
    /page

Recently Viewed Lots