289
Lot
289
You are about to place a bid of USD
Timed Auction:Current bid:
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
We have noticed that your maximum bid is higher or equal to the buy it now price for this lot.
Would you like to discard your maximum bid and proceed with the buy it now option?
You cannot Buy it now until you are approved to bid.
Please contact the auctioneer (1-815-570-2488)
Choose one of the quick bid options below:
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
To place a bid select the minimum amount below:
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
Racks of Spare Parts 5D/6D -- This inventory was there as of when plant closed. No guarantee it is accurate. Use as reference only. Total Value of $18,861.11 M020459201 Housing, Bearing, Drive, M0180369 Knife, Rotary, Flat, PRIN2622, AMCH, M0345418 Knife, Stationary, 2621HCHC60, EGRND, M037819101 Bushing, Slip, Outer, 1020662, WLR, M037705101 Nut, Washer, Pivot, Door, 1020620, WLR, M037869101 Adapter: Cone, 4", Symmetric, M017197301 Rod End, LH, M12, BL12BDL, THK, M047582301 Shaft: Cylinder, Bottom Left, M500031702 Gasket, 4885455, MRL, M500031703 Grease, 4885731, MRL, M0381746 Kit, Seal, 100866, HGR, M0380581 Relay, Thermal, 0410020, MTLDO, M500031681 Valve, 4906931, MRL, M1242279 Block, Indexer, Hoist, SP33N, ALPWRM040511501 Pushbutton, E-Stop, 32mm, 105111741, MLT, M029776201 Belt, Conveyor, M040461801 Switch, Toggle, 3 Position, M0381698 Magnet, Round, 7.5x7.5mm, 85463101003, MLTM0380976 Switch, Safety, Magnet, 7.5x14mm, 85463101005, M014323801 Roller, Drive, Discharge End, M063655601 Pin, Shear, 1" Shaft Dia, 0.59" Neck Dia, M008653201 Assembly: Bearing Housing, M500019316 Cylinder, 63x586mm, ESBFBS6358610P, Festo, M0322871 Switch, Micro, 882763, 85461221010, MLT, M905675201 Bar, Seal: Assembly, Final, M500021281 Sprocket, 81C, 11T, 1300003818, GELC, M027964901 Pusher, Dog, Upper, FAP7833, M010596901 Gear, Idler, Planetary. M054871701 Camera, JAIVM50, AN00312914, THRN M019992101 Seal: 38332-21100, M019913101 Seal, 55mm OD, 35mm ID, 10mm WD, M013591501 Seal, Oil, Rotary, Clipper, HD, 10816H1L5, PKR, M012579201 Seal, Oil, M027958301 Sprocket: 0.375" Bore, M500030993 Sprocket, 120 Chain, 24T, Hardened, QD, 120E24H, MRTN, M500021209 Sprocket, 2200, 6.3" OD, 1.5" SQ, 4100002793, M033319901 Sprocket, 120 Chain, 24T, 1.5"B, 120R24H, MTN, M062177101 Sprocket: Chain, Single Hub, QD, #200, 2, M013736001 Element, Heater, 8.95 Max Amp, M012115501 Coupling, Jaw, 1.125", M040808201 Bushing, Drive, Split Taper, R2, 2.937", M032916101 Bushing, QD, F, 2-15/16", F215/16, MTN, M012314201 Bushing, QD, E, 2-15/16", E215/16, MTN, M1007994 Sprocket, 12T, Square Bore, 6000ABF, 9737527, MRL, M500023068 Sprocket, 4400, Nylon, Black, 10T, 6.5" OD, 1.5" SQ, M0180331 Guide, 1084577, Grote Co
Equipment pickup starts on August 18th and all equipment must be picked up by September 17th. Rigger: Nebraska Stainless- Norm Pavlish 402-540-8843.
Equipment pickup starts on August 18th and all equipment must be picked up by September 17th. Rigger: Nebraska Stainless- Norm Pavlish 402-540-8843.
=====================================================
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: 253-858-6777 Toll Free: 866-597-2437
Barliant Auctions, Inc. Terms of Sale
Terms & Conditions:
1. An eighteen percent (18%) buyer’s premium will be added to all purchases.
2. Payment Shall Be:
A.) Cash, check with bank letter, same day wire transfer. We do not accept credit cards. The bank letter should read: _______________ is a valued customer and the ____________Bank will guarantee payment of checks or wire transfers drawn by_______________ for any amount up to $__________ for purchase of items at the ____________ auction on (Date)___________
B.) Paid immediately after completion of auction.
C.) In default if payment in full is not made within the time specified. Barliant Auctions, Inc., in addition to all other remedies allowed by law, may retain all monies received as liquidated damages. Lots not paid for and/or not removed within the time allowed herein may be resold by public or private sale. Any deficiency, together with all expenses of resale, will be charged to the defaulting buyer.
D.) The record of sales kept by the auctioneer and clerk will be taken as final.
E.) State sales tax will be collected where applicable.
3. Warranty & Description: Barliant Auctions, Inc __________________ make no warranty, expressed or implied, including any implied warranty of merchantability or fitness for a particular purpose, and no person has authority on behalf of Barliant Auctions, Inc. to grant such warranty or make any representation, written or oral, regarding such equipment, parts or supplies. All goods are sold As Is, Where Is. While we have endeavored to be as accurate as possible in our descriptions, buyers should avail themselves of the opportunity to make inspection prior to purchase and should use their own determination as to make, model, condition, age, value and any other pertinent information required.
4. Safety Devices:: Articles purchased may not incorporate approved activating mechanisms, operating safety devices or safety guards, as required by OSHA or otherwise. It is buyer’s responsibility that articles purchased be so equipped and safeguarded to meet all requirements on equipment sold at this sale.
5. Indeminfication: Buyer shall defend and indemnify and hold Barliant Auctions, Inc.
harmless from and against all claims and liabilities relating to the condition of, removal of, or use of the articles purchased or failure of user to follow instructions, warnings, or recommendations of the manufacture, or to comply with federal, state, and local laws applicable to such articles, including OSHA requirements, and Environmental Protection Agency requirements, or for approximate or consequential damages, costs or legal expenses arising therefrom.
6. Barliant Auctions, Inc. reserve the right to withdraw items from or add items to the sale, and also reserve the right to group one or more lots or subdivide into two or more Lots. Items being sold by quantity wil be "times by money".
7. Proxy Bids will be bid by Barliant Auctions, Inc. staff on the buyer’s behalf.
8. Disputes between Bidders: If any dispute arises between two or more bidders, the auctioneer’s decision will be final. The record kept by the Barliant Auctions’ clerk will be final in any dispute during Internet bidding.
9. Minimums and Reserves: When an item is offered as ABSOLUTE, the high bid will be accepted without any conditions. When n item is offered WITH A MINUMUM BID, the high bid will be accepted if it is equal to or greater than the minimum. Items offered WITH RESERVE are subject to the seller’s acceptance of the high bid. Reserve: The auctioneer reserves the right to reject any and all bids. On lots upon which there is a reserve, the auctioneer or his assigned agents, shall have the right to bid on behalf of the seller..
10. Removal:
A.) The auctioneers will make every effort to provide security at the auction site. However, after a piece of equipemnt is sold, its' removal and security become the sole responsibility of the buyer.
B.) No equipment will be removed until auction is completed.
C.) Pickup starts on August 18th and all equipment must be picked up by September 17th. Property not removed by the allotted time will be considered abondoned and disposed of. No claims will acknowledged.
D.) Check out will be 8:00 a.m. to 4:00 p.m. weekdays. Upon request, weekends may or may not be made available.
11. Claims: No claims will be allowed after removal of goods from premises.
12. Risk to person and property: Persons attending during inspection, sale, or removal of goods assumes all risks of damage of or loss to person and property and specifically release Barliant Auctions, Inc. from any and all liabilities.
13. Announcements made on the day of the sale supersede any printed material or other advertised information.
Please contact us or notify our staff at this auction if your company has the need of an appraisal or has surplus equipment from single items to complete plants or if you need equipment not offered at this sale.
Thank you for attending another Barliant Auctions sale.
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
Racks of Spare Parts 5D/6D -- This inventory was there as of when plant closed. No guarantee it is accurate. Use as reference only. Total Value of $18,861.11 M020459201 Housing, Bearing, Drive, M0180369 Knife, Rotary, Flat, PRIN2622, AMCH, M0345418 Knife, Stationary, 2621HCHC60, EGRND, M037819101 Bushing, Slip, Outer, 1020662, WLR, M037705101 Nut, Washer, Pivot, Door, 1020620, WLR, M037869101 Adapter: Cone, 4", Symmetric, M017197301 Rod End, LH, M12, BL12BDL, THK, M047582301 Shaft: Cylinder, Bottom Left, M500031702 Gasket, 4885455, MRL, M500031703 Grease, 4885731, MRL, M0381746 Kit, Seal, 100866, HGR, M0380581 Relay, Thermal, 0410020, MTLDO, M500031681 Valve, 4906931, MRL, M1242279 Block, Indexer, Hoist, SP33N, ALPWRM040511501 Pushbutton, E-Stop, 32mm, 105111741, MLT, M029776201 Belt, Conveyor, M040461801 Switch, Toggle, 3 Position, M0381698 Magnet, Round, 7.5x7.5mm, 85463101003, MLTM0380976 Switch, Safety, Magnet, 7.5x14mm, 85463101005, M014323801 Roller, Drive, Discharge End, M063655601 Pin, Shear, 1" Shaft Dia, 0.59" Neck Dia, M008653201 Assembly: Bearing Housing, M500019316 Cylinder, 63x586mm, ESBFBS6358610P, Festo, M0322871 Switch, Micro, 882763, 85461221010, MLT, M905675201 Bar, Seal: Assembly, Final, M500021281 Sprocket, 81C, 11T, 1300003818, GELC, M027964901 Pusher, Dog, Upper, FAP7833, M010596901 Gear, Idler, Planetary. M054871701 Camera, JAIVM50, AN00312914, THRN M019992101 Seal: 38332-21100, M019913101 Seal, 55mm OD, 35mm ID, 10mm WD, M013591501 Seal, Oil, Rotary, Clipper, HD, 10816H1L5, PKR, M012579201 Seal, Oil, M027958301 Sprocket: 0.375" Bore, M500030993 Sprocket, 120 Chain, 24T, Hardened, QD, 120E24H, MRTN, M500021209 Sprocket, 2200, 6.3" OD, 1.5" SQ, 4100002793, M033319901 Sprocket, 120 Chain, 24T, 1.5"B, 120R24H, MTN, M062177101 Sprocket: Chain, Single Hub, QD, #200, 2, M013736001 Element, Heater, 8.95 Max Amp, M012115501 Coupling, Jaw, 1.125", M040808201 Bushing, Drive, Split Taper, R2, 2.937", M032916101 Bushing, QD, F, 2-15/16", F215/16, MTN, M012314201 Bushing, QD, E, 2-15/16", E215/16, MTN, M1007994 Sprocket, 12T, Square Bore, 6000ABF, 9737527, MRL, M500023068 Sprocket, 4400, Nylon, Black, 10T, 6.5" OD, 1.5" SQ, M0180331 Guide, 1084577, Grote Co
Equipment pickup starts on August 18th and all equipment must be picked up by September 17th. Rigger: Nebraska Stainless- Norm Pavlish 402-540-8843.
Equipment pickup starts on August 18th and all equipment must be picked up by September 17th. Rigger: Nebraska Stainless- Norm Pavlish 402-540-8843.
=====================================================
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: 253-858-6777 Toll Free: 866-597-2437
Barliant Auctions, Inc. Terms of Sale
Terms & Conditions:
1. An eighteen percent (18%) buyer’s premium will be added to all purchases.
2. Payment Shall Be:
A.) Cash, check with bank letter, same day wire transfer. We do not accept credit cards. The bank letter should read: _______________ is a valued customer and the ____________Bank will guarantee payment of checks or wire transfers drawn by_______________ for any amount up to $__________ for purchase of items at the ____________ auction on (Date)___________
B.) Paid immediately after completion of auction.
C.) In default if payment in full is not made within the time specified. Barliant Auctions, Inc., in addition to all other remedies allowed by law, may retain all monies received as liquidated damages. Lots not paid for and/or not removed within the time allowed herein may be resold by public or private sale. Any deficiency, together with all expenses of resale, will be charged to the defaulting buyer.
D.) The record of sales kept by the auctioneer and clerk will be taken as final.
E.) State sales tax will be collected where applicable.
3. Warranty & Description: Barliant Auctions, Inc __________________ make no warranty, expressed or implied, including any implied warranty of merchantability or fitness for a particular purpose, and no person has authority on behalf of Barliant Auctions, Inc. to grant such warranty or make any representation, written or oral, regarding such equipment, parts or supplies. All goods are sold As Is, Where Is. While we have endeavored to be as accurate as possible in our descriptions, buyers should avail themselves of the opportunity to make inspection prior to purchase and should use their own determination as to make, model, condition, age, value and any other pertinent information required.
4. Safety Devices:: Articles purchased may not incorporate approved activating mechanisms, operating safety devices or safety guards, as required by OSHA or otherwise. It is buyer’s responsibility that articles purchased be so equipped and safeguarded to meet all requirements on equipment sold at this sale.
5. Indeminfication: Buyer shall defend and indemnify and hold Barliant Auctions, Inc.
harmless from and against all claims and liabilities relating to the condition of, removal of, or use of the articles purchased or failure of user to follow instructions, warnings, or recommendations of the manufacture, or to comply with federal, state, and local laws applicable to such articles, including OSHA requirements, and Environmental Protection Agency requirements, or for approximate or consequential damages, costs or legal expenses arising therefrom.
6. Barliant Auctions, Inc. reserve the right to withdraw items from or add items to the sale, and also reserve the right to group one or more lots or subdivide into two or more Lots. Items being sold by quantity wil be "times by money".
7. Proxy Bids will be bid by Barliant Auctions, Inc. staff on the buyer’s behalf.
8. Disputes between Bidders: If any dispute arises between two or more bidders, the auctioneer’s decision will be final. The record kept by the Barliant Auctions’ clerk will be final in any dispute during Internet bidding.
9. Minimums and Reserves: When an item is offered as ABSOLUTE, the high bid will be accepted without any conditions. When n item is offered WITH A MINUMUM BID, the high bid will be accepted if it is equal to or greater than the minimum. Items offered WITH RESERVE are subject to the seller’s acceptance of the high bid. Reserve: The auctioneer reserves the right to reject any and all bids. On lots upon which there is a reserve, the auctioneer or his assigned agents, shall have the right to bid on behalf of the seller..
10. Removal:
A.) The auctioneers will make every effort to provide security at the auction site. However, after a piece of equipemnt is sold, its' removal and security become the sole responsibility of the buyer.
B.) No equipment will be removed until auction is completed.
C.) Pickup starts on August 18th and all equipment must be picked up by September 17th. Property not removed by the allotted time will be considered abondoned and disposed of. No claims will acknowledged.
D.) Check out will be 8:00 a.m. to 4:00 p.m. weekdays. Upon request, weekends may or may not be made available.
11. Claims: No claims will be allowed after removal of goods from premises.
12. Risk to person and property: Persons attending during inspection, sale, or removal of goods assumes all risks of damage of or loss to person and property and specifically release Barliant Auctions, Inc. from any and all liabilities.
13. Announcements made on the day of the sale supersede any printed material or other advertised information.
Please contact us or notify our staff at this auction if your company has the need of an appraisal or has surplus equipment from single items to complete plants or if you need equipment not offered at this sale.
Thank you for attending another Barliant Auctions sale.
Catalog
Tags: Festo, Heater, Bearing, Gasket, Knife, Oil, Magnet