Lot

0F

TERMS AND CONDITIONS PART 3: DISCONNECT & REMOVAL

In LATE MODEL ASSETS FROM BATTERY TESTING, R&D, M...

Please log in or sign up to place a bid.
This auction is live! You need to be registered and approved to bid at this auction.
You have been outbid. For the best chance of winning, increase your maximum bid.
Your bid or registration is pending approval with the auctioneer. Please check your email account for more details.
Unfortunately, your registration has been declined by the auctioneer. You can contact the auctioneer on (818) 508-7034 for more information.
You have the leading pre-bid. For the best chance of winning, place a max bid now, or login on to bid in real-time at the live webcast auction.
Leave a bid now! Your registration has been successful.
Sorry, bidding has ended on this item. We have thousands of new lots everyday, start a new search.
Bidding on this auction has not started. Please register now so you are approved to bid when auction starts.
TERMS AND CONDITIONS PART 3: DISCONNECT & REMOVAL
This is a Live Webcast auction, with Pre-Bidding available.
Loading... Loading...
Register to bid online Register to bid online
You're registered for this auction
Waiting for registration approval
Registration has been declined
., California
Payment Option
Payment Option
Payment Option
Payment Option
Payment Option
Auctioneer has chosen not to publish the price of this lot
., California
0.00%
20.00%

TERMS AND CONDITIONS FOR DISCONNECT AND REMOVAL:

 

All electrical disconnect, liquid removal, rigging, loading, broom cleaning, trash & debris removal, floor stud removal and transportation are the sole and absolute responsibility of the Undersigned. The undersigned agrees to remove its purchases in full, with no abandonment privileges from the premises on or before the date on the Buyers invoice. 

 

No item(s), no matter how small, may be removed while the auction is in progress. Representatives of the Auctioneer at the Auctioneer's sole discretion may stay one hour after the auction is completed for the removal of small items. All small subject to disappear items must be removed by 4:00 PM on the day following the auction. 

 

The Undersigned must present the Auctioneers personnel with proof of valid workers compensation insurance and a commercial general liability insurance certificate in a minimum amount of $2,000,000.00 combined single limit per occurrence coverage naming the Auctioneer, the Seller and the Landlord as additional insured. 

 

If available at Auctioneers sole and absolute discretion, bridge cranes and hoist may be used by the Undersigned if crane insurance is included on the above certificate and only with the written permission of the crane owner.         

 

Should any pits, floor bolts or hazards of any type exist after removal of equipment, it is the responsibility of the Undersigned, at its cost, to reasonably safe guard these areas using generally accepted safety practices, such as safety tapes, pipes or bars welded in place or suitable safety barriers acceptable to the Auctioneer. All floor bolts and/or anchoring fasteners are to be cut flush to the floor and the area left broom clean and all debris removed. It is the responsibility of the Undersigned to be sure that the power to the item(s) is off and then to safely disconnect all electrical wiring and utility piping from the item(s) and to cap at the first electrical or air junction of the item(s). 

 

Item(s) are to be staged for loading in the area assigned by the Auctioneer's personnel. 

 

It is the Undersigned's responsibility to secure all safety equipment to meet all applicable government safety standards in using or removing any items purchased. Certain items may contain residual chemicals and/or hazardous materials. The Undersigned hereby agrees to indemnify and hold harmless the Auctioneer from any and all damages, claims or liabilities from any injuries to persons or property of any type whatsoever caused by the Undersigned, its agents, employees or contractors during the sale or during the removal, use or operation of the purchased item(s). Any hydraulic fluid removal and/or oil leaks are the Undersigned's responsibility to remove and clean up. The Undersigned must take full responsibility for compliance with applicable environmental laws and exercise all reasonable care to ensure that there is no release to the environment of any hazardous wastes or substances as defined in applicable Federal, State and Local Statues, Regulations, Rules or Ordinances. 

 

No trucks are to be left running in an enclosed building. 

 

The Auctioneer is not liable for personal belongings left on premises. 

 

Any surface or structural damage to the premises including but not limited to the walls, ceilings, floors, overhead doors, gates and/or any other item(s), etc. will be the Undersigned's sole responsibility. The Undersigned will not be permitted to leave with its purchases until repairs are made.

 

Theft will not be tolerated and Auctioneer reserves the right to inspect all trucks, toolboxes and rigger cases, etc. Instances of theft will result in immediate termination of removal privileges and full prosecution by law. All quantities must be checked prior to removal, as adjustments will not be made thereafter.  

       

These terms and conditions together with any amendments or modifications, expressly made by the Auctioneer at the time of the auction constitute all the terms and conditions with respect to the sale of items at this auction.  There are no representations, warranties, terms, conditions, undertakings or collateral agreements except as hereinabove provided 

 

I acknowledge that I have provided BidItUp Auctions Worldwide, Inc. a signed check for which I am the authorized signatory for all purposes, without restriction, sufficient to pay this negotiable instrument upon demand. I authorized BidItUp to obtain my financial information from any source and complete the check as necessary for the amount of my invoice at the auction to be presented for payment. I agree to pay all cost of collections including attorney's fees, to pay interest at the rate of 18%, unless prohibited by law, and in such case at the highest amount permitted by law from the date of issuance of this check if dishonored by a financial institution, to waive any requirement of presentment, to the exclusive jurisdiction of the executed Auction Bidders Agreement for any dispute relating to this instrument. A credit instrument is identical to a personal check. Willfully drawing or passing a credit instrument knowing there are insufficient funds in an account upon which may be drawn, or with the intent to defraud, is a crime which may result in criminal prosecution.

TERMS AND CONDITIONS FOR DISCONNECT AND REMOVAL:

 

All electrical disconnect, liquid removal, rigging, loading, broom cleaning, trash & debris removal, floor stud removal and transportation are the sole and absolute responsibility of the Undersigned. The undersigned agrees to remove its purchases in full, with no abandonment privileges from the premises on or before the date on the Buyers invoice. 

 

No item(s), no matter how small, may be removed while the auction is in progress. Representatives of the Auctioneer at the Auctioneer's sole discretion may stay one hour after the auction is completed for the removal of small items. All small subject to disappear items must be removed by 4:00 PM on the day following the auction. 

 

The Undersigned must present the Auctioneers personnel with proof of valid workers compensation insurance and a commercial general liability insurance certificate in a minimum amount of $2,000,000.00 combined single limit per occurrence coverage naming the Auctioneer, the Seller and the Landlord as additional insured. 

 

If available at Auctioneers sole and absolute discretion, bridge cranes and hoist may be used by the Undersigned if crane insurance is included on the above certificate and only with the written permission of the crane owner.         

 

Should any pits, floor bolts or hazards of any type exist after removal of equipment, it is the responsibility of the Undersigned, at its cost, to reasonably safe guard these areas using generally accepted safety practices, such as safety tapes, pipes or bars welded in place or suitable safety barriers acceptable to the Auctioneer. All floor bolts and/or anchoring fasteners are to be cut flush to the floor and the area left broom clean and all debris removed. It is the responsibility of the Undersigned to be sure that the power to the item(s) is off and then to safely disconnect all electrical wiring and utility piping from the item(s) and to cap at the first electrical or air junction of the item(s). 

 

Item(s) are to be staged for loading in the area assigned by the Auctioneer's personnel. 

 

It is the Undersigned's responsibility to secure all safety equipment to meet all applicable government safety standards in using or removing any items purchased. Certain items may contain residual chemicals and/or hazardous materials. The Undersigned hereby agrees to indemnify and hold harmless the Auctioneer from any and all damages, claims or liabilities from any injuries to persons or property of any type whatsoever caused by the Undersigned, its agents, employees or contractors during the sale or during the removal, use or operation of the purchased item(s). Any hydraulic fluid removal and/or oil leaks are the Undersigned's responsibility to remove and clean up. The Undersigned must take full responsibility for compliance with applicable environmental laws and exercise all reasonable care to ensure that there is no release to the environment of any hazardous wastes or substances as defined in applicable Federal, State and Local Statues, Regulations, Rules or Ordinances. 

 

No trucks are to be left running in an enclosed building. 

 

The Auctioneer is not liable for personal belongings left on premises. 

 

Any surface or structural damage to the premises including but not limited to the walls, ceilings, floors, overhead doors, gates and/or any other item(s), etc. will be the Undersigned's sole responsibility. The Undersigned will not be permitted to leave with its purchases until repairs are made.

 

Theft will not be tolerated and Auctioneer reserves the right to inspect all trucks, toolboxes and rigger cases, etc. Instances of theft will result in immediate termination of removal privileges and full prosecution by law. All quantities must be checked prior to removal, as adjustments will not be made thereafter.  

       

These terms and conditions together with any amendments or modifications, expressly made by the Auctioneer at the time of the auction constitute all the terms and conditions with respect to the sale of items at this auction.  There are no representations, warranties, terms, conditions, undertakings or collateral agreements except as hereinabove provided 

 

I acknowledge that I have provided BidItUp Auctions Worldwide, Inc. a signed check for which I am the authorized signatory for all purposes, without restriction, sufficient to pay this negotiable instrument upon demand. I authorized BidItUp to obtain my financial information from any source and complete the check as necessary for the amount of my invoice at the auction to be presented for payment. I agree to pay all cost of collections including attorney's fees, to pay interest at the rate of 18%, unless prohibited by law, and in such case at the highest amount permitted by law from the date of issuance of this check if dishonored by a financial institution, to waive any requirement of presentment, to the exclusive jurisdiction of the executed Auction Bidders Agreement for any dispute relating to this instrument. A credit instrument is identical to a personal check. Willfully drawing or passing a credit instrument knowing there are insufficient funds in an account upon which may be drawn, or with the intent to defraud, is a crime which may result in criminal prosecution.

LATE MODEL ASSETS FROM BATTERY TESTING, R&D, MACHINE SHOP & LAB FACILITY

Sale Date(s)
Venue Address
.
.
California
.
United States

For BidItUp Auctions Worldwide delivery information please telephone (818) 508-7034.

Important Information

Major Offering of Brands like Neware, Keysight, Keyence, Karl Fisher, Anton Paar, Haas, Braun, Cole Palmer & Much More!

BidItUp Auctions Worldwide in partnership with Heritage Global Partners presents:

LATE MODEL ASSETS FROM BATTERY TESTING, R&D, MACHINE SHOP & LAB FACILITY- Assets Surplus to the Ongoing Operations of a California EV Battery & Advanced Energy Systems Manufacturer:

THERMAL CHAMBERS

  • (10) 2023 Neware Thermal Chambers, including Model MGDE-225-40BFC-208V
  • (1) 2022 Neware Thermal Chamber
  • (1) Sanwood Thermal Chamber, Model SM 64 CC FB 2
  • (1) Tanac RDLine01 2-Door Chamber
  • (1) IVYX Scientific Chamber
  • (1) Vevor Scientific Chamber

CYCLER CHANNELS & BATTERY TEST SYSTEMS

  • (10) 2022 Neware Cycler Channels (Controls), Model CT-ZWJ-4'S-T-1U, Median Machine Ver: B01-BTS-ZWJ-4.38T
  • (1) Arbin BT-2000 Cycler
  • (2) Keysight SL100A Battery Testing Systems

FERMENTATION & LAB CHAMBERS

  • (9) Rapt Fermentation Chambers, including Model KL18258, High Side 100 PSI, Kegland, Intertek

LAB & ANALYTICAL EQUIPMENT

  • (1) Karl Fisher Moisture Automatic Titrator, Kyoto Instruments
  • (1) Karl Fisher Acid Content Measurement System
  • (1) Anton Paar Tapping Density Tester
  • (1) Gurley Tester
  • (3) Mettler Toledo Laboratory Scales
  • (1) Keyence Digital Optical Microscope with High Resolution Displacement / LVDT Sensors
  • (1) Solatron Ametek Electrochemical Impedance Spectroscopy (EIS) System
  • (1) TOC Sheen Drawdown Table with Doctor Blade
  • (2) Electrode Calendar Mills
  • (2) Cole Palmer Component Drying Ovens
  • (1) Thermo Scientific Drying Oven
  • (1) Flacktek Mixer, 2750 RPM, 3.9kW, 5.2HP
  • (1) Flacktech Speed Mixer DAC 1200-300
  • (1) Gelon Ultrasonic Welder GN-800 Semi-Automatic Stacking Machine
  • (2) Gelon Ultrasonic Welders GN-800
  • (1) Vacuum Sealing Station
  • (6) Duram Wheaton Kimble Glassware Boxes, 30ml
  • (50) Boxes of Magnetic Stir Plate Bars
  • (1) American International Electric Double Impulse Sealer
  • (1) Starett Thickness Measurement Granite Surface Table
  • (1) Fowler Thickness Measurement Granite Surface Table
  • (1) Starett Pink Granite Surface Table
  • (1) Mettler Toledo pH Probe Lot
  • (2) XStream Lab Fume Hood
  • (1) Labocono Fume Hood

MACHINE SHOP & CNC EQUIPMENT

  • 2017 Haas UMC-750 CNC Universal Machining Center (5-Axis)- Trunnion Table, Jorgenson Chip Conveyor, High Pressure Coolant System, Tooling by Maritool, Probe, tombstones, fixtures, machining accessories, 40 station tool changer
  • 2016 Haas VM3 CNC Vertical Machining Center (3-Axis) - Tooling by Maritool, 40 station tool changer, Programmed with Autodesk Cam, Programmed with HSM Works for SolidWorks, Air Aux to blow air off parts
  • Hardinge Super Precision Lathe
  • First Machinery Combination Vertical/Horizontal Milling Machine with TRAH DRO, 3-Axis, Universal Head w Horizontal
  • FlexArm Tapping Unit on Cart with Tooling
  • Kurt Machine Vises
  • Nova 251 Vibratory Bowl Table

BATTERY & STORAGE

  • Lithium Ion Batteries – Life 8041072, 2050mAh

ISOLATION & GLOVEBOX SYSTEMS

  • (2) Braun Unilab Glove Boxes, Siemens Control, Mecomatic with Welch Self-Cleaning Dry Vacuum System Model 2025, Smart Logix Air Control, fully equipped!  Large vacuum oven chamber, small antechamber, o2, H20 sensors, 02 trap and regeneration ability, run off of air - 2 Separate Units, 1 -4 gloves, 1 -2 gloves, see full listing for specs on each of these.

GENERAL PLANT SUPPORT

  • 100s of lots of like new tooling, spare parts, MRO!
  • Beautiful Flammable Cabinets
  • Uline Banding Machines
  • (1 Lot) Sheet Metal, Carts, Grinders, Fans, Push Carts, Pallet Jacks
  • (6) Daytona Dolly Storage Racks
  • (1) Double A-Frame Crane Hoist (Aluminum)
  • (1) H-Frame Hydraulic Press
  • Husky Tool Cabinets
  • Workstations
  • Office Furniture
  • Conference Tables
  • TVS
  • Computers

This Is Just the Beginning...
Dozens more items across lab, testing, and machining categories available in this expansive facility liquidation. Don’t miss your chance to bid on high-value assets! 

Full Lot Listing Coming Soon!

REGISTER NOW!

 

 

 

 

 

=====================================================

BidSpotter Customer Service Support Department 

Have a question pertaining to the bidding process? 

Visit our Frequently Asked Questions!  

You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here

Customer Support Hours:

  • Monday – Friday, 8:00 AM ET – 8:00 PM ET

Email: support@bidspotter.com

Office: 253-858-6777 Toll Free: 866-597-2437

Frequently Asked Questions

Terms and Conditions

See Full Terms And Conditions

Tags: Fasteners, Safety Equipment, Toolbox, Broom, Tape