Auction closed
Mio, Michigan
Live webcast

Auction dates


  • (Lots: 550)

Viewing dates

  • 9am - 5pm ET

Auction details

Currency: USD
Buyer's premium: 15.00%

Venue address

711 W Kittle Rd Mio, Michigan 48647 United States

Auction house

Add to favorites Ask a question phone_in_talk 574-825-0704
You’re currently pending approval by the auctioneer. In the meantime you can continue to place bids from the lot page which will be accepted once you’re approved.
542 item(s)
  • List
  • Grid
  • 542 item(s)
    /page

Results for live webcast and timed auctions may not have been verified by the auctioneer. If you are in any doubt of the accuracy of the prices provided, please call the auction house to confirm.

Information Lot 1 week for removal of equipment. Loadout is available at no charge for 1 week from 8 to 4 weekdays and by appointment on the weeke...

Manual Sealless Steel Strapping Tool Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30 ...[more]

Heavy Equipment Key Set 22 Keys Shipping available for $20

Mitutoyo Dial Calipers/Central Tool O. D. Gauge O.D. Gauge 0" - 4", Central Tool O.D. Gauge

Starret Machinist Level 2 Hex wrench sets

Milwaukee Fuel 1/2'' Cordless Impact includes charger and 12.0 amp battery, good condition

Milwaukee Fuel 3/8'' Cordless Impact with charger and 5.0 amp battery, good condition

Milwaukee Fuel Cordless Tools 1/2'' drill, charger, 1/4'' impact driver, 2 batteries, good condition

Milwaukee Fuel Cordless Tools 3/8'' hammer drill, concrete drill bits, battery charger, good condition

Milwaukee Cordless Bandsaw fuel, no charger, good condition

Werner 8' Step Ladder fiberglass, 2 sided

Banding Cart with Roll of 1/2'' Plastic Banding Heavy Duty, shop built, 1/2'' wire buckles

Powermatic Metal Cutting Vertical Bandsaw MN # 87, SN 67-7928, 3/4'' blade, 2 extra blades 12' 6'' long, 19'' throat opening, 1 1/4'' x 20'' wheel...

10'' Bench Grinder 2 HP electric, single phase, plug in ready, 1,750 RPM, on stand, 3 dressing tools

Grizzly Metal Working Belt Sander 4 HP, 3 phase, plug in ready, 3'' x 79'' belt

Famco 4R Arbor Press Manual with ratcheting handle, 1 1/8'' arbor, 10'' throat, 16'' opening, SN 1153, on stand

Heavy Duty Shop Press Shop built, 3/4" X 4" X 12" sides, 48" X 8', 4" rod on cylinder, 38" stroke, 2" X 8" table sides, 16" X 41" work table, incl...

Hydraulic Mech Horizontal Metal Cutting Bandsaw MN S-20, SN 20984552, 13' 6'' x 1'' blade, hydraulic clamp, 14'' x 8' infeed rollcase, blade oiler...

Metal Cutting Band Saw Blades 13' 6'' x 1 x 3/4 QXP, 8 NEW and 3 used

Piranha Ironworker SN P3-1741, punch press with 8'' throat, 12'' straight cutter, 5'' V-notch angle cutter, 2 1/2'' x 4'' notcher, material stop w...

Lown Roll Former MN B300, 1 HP, 3 phase electric motor, plug in ready, 3'' x 36'' rolls with grooves for round stock

Cincinnati # 7 Metal Working Press Brake Triad controls, Madison -Kipp lubricator, extra dies, 12' wide, 10' capacity, Dynabend I computer control...

Metal Cutting Shear 10' wide, electric over hydraulic controls, sides have been reinforced with 1'' and cutting arm with 1 1/2'', works good

Airco Cutting Machine with HL-8, Linatrol Copier SN 78-102, MN 4-806, size 48'' x 48'', 48'' x 11' cutting table, includes all hoses & gauges, no ...

Hypertherm PowerHA 1000 Plasma Cutter Serial # 1000 -051236, Model 083169 can be used on Lot #119, 11OV, 50' hose on gun, good condition

Cincinnati Heavy Duty Drill Press 21", Hydraulic drive, 19" round work table, 6" and 8" flat vices

Tooling for drill press Blocks, bolts, bars, angle steps, and 2 crescent wrenches

Index Milling & Drilling Machine MN 847, SN 16447, Newal DP700 computer control, hydraulic drive with 110 over hydraulic controls, good condition ...

Bridgeport Series # II Dual Head Milling Machine 11'' x 5' work table with vice, Newal DP700 computer controls, hydraulic drive with 110 over hydr...

Mighty Turn Metal Turning Lathe MN L-1880GL, SN 09060702, manufacturing Date 1993, hydraulic drive, 3 jaw chuck, DC motor starter, extra 4 jaw chu...

Tur-63 Turning Lathe MN TUR-63, SN 41169, Year 1979, 240V, Newal C80 computer controls,3 jaw chuck, oiler system, 6'' swing x 63'' capacity,1-4 ja...

Cabinet with Parts for Lathe 2 pc. 3 jaw chucks, 2 pc. tool holders, assorted parts, all contents

Lot 127

Tap and Die Set

Tap and Die Set 8pc., includes 2 handles

5 Drawer Cabinet with Spiral Milling Bits 10'' x 11'' cabinet, assorted sizes and types

9 Drawer Cabinet with Thread Cutting Taps 15'' x 24'' cabinet, drill bits, various sizes and types

9 Drawer Cabinet with Drill Bits From .0400 to 1/2'', LOTS of new bits

Tool Chest with Honing Tools Plus Parts 3 Honing tools with lots of new stone sets, Snap ring plier sets, Allen wrenches, misc. parts

Lot 132

Tool Chest

Tool Chest Machining tools and parts, wedges, Carbide end mills, screw extractors, Lathe tail piece, levels and center finders

Lot 133

Tool Chest

Tool Chest Boring head, cutter holding tools, chuck keys, V-blocks, shim stock, set of 6 O.D. gauges, bar clamps, planer gauges, lettering punch s...

Lot 134

Tool Chest

Tool Chest Dial indicator parts, counter sink cutters, Tap extensions, Tap handles, Deburring tools and files, machinery handbook, hole punch sets

Machinist Tool Box Gem power gear box, dial indicators, O. D. gauges

Measuring Gauge/Milling Bits Height Micro gauge measures 24'', misc. reamers and bits

7 Drawer Chest with Parts 28'' x 34'' x 28'' deep, Lathe chucks and live centers, carbide tooling and holders, brass pieces, O.D. micrometers, pip...

7 Drawer Chest with Parts Broach bushings from 6'' to 1.750, Morris taper drill bits, planer and boring gauges, 1/2'' shank drill bits, ball joint...

7 Drawer Chest with Parts 7/8'' broach sets, wood bits, number and letter punches, small hone set, Mill boring head and tooling, Tap and Die sets,...

Lot 141

Steel Workbench

Steel Workbench 30'' x 8' x 36'' high

Bridge Crane 5 Ton Load Lifter Cable lift, magnet lift block, 54' x 60' x 20' high, electric drive, 2 lift claws, works good

Metal Cutting Hacksaw* Model BSM-323, Serial # 1170611144-63939, 230 V, 10" x 10" capacity, ready to go

Miller Welder Invision 456MP SN LB000247, DC inverted Arc welder, 2-H5.V. 2 amp receptors, using 460V, 40' lead to remote, with 70 Miller series w...

Shores Technology Metal Cutting Hacksaw* Model VBS 200, serial # 127280100939324, box of new blades, 460 V, good condition

Miller XMT 304 Series SN LEI58227, with 24V Miller S-22A wire feeder, 35' lead to remote

Miller Invision 354 MP Arc Welder SN LB30707, Miller 22A wire feeder, 50' lead to remote

Miller Arc Welder SN LH230288A, with spool-o-matic 38A spool gun, with Miller S-22A 24V wire feeder, 35' lead

Miller Dynasty 300 DX Tig Welder SN LFO89115, with foot pedal, with Miller cool mate 3, on cart

Lot 149

22' Swing Arm

22' Swing Arm Includes 20' tall steel mount post

Lot 150

24' Swing Arm

24' Swing Arm Includes 20' tall steel mount post

Lot 151

21' Swing Arm

21' Swing Arm Includes 20' tall steel mount post

Loading...Loading...
  • 542 item(s)
    /page

Recently Viewed Lots