Daewoo D30S Forklift , Meter reads: 10,506 hours Engine: Cummins B3.3 Fuel type: Diesel Load capacity: 5,000 lb. Stage mast: 3 Side shift: Yes For...

PJ Dump Trailer , 76" x 12', dual axle, side swing rear doors. No title, bill of sale only ...[more]

Hoover Skid Loader Bucket , 7' wide x 32" tall x 4' deep, quick attach ...[more]

Cherokee Garage Pallet Forks , Quick attach, 4" x 48", 45" wide, in good condition ...[more]

Peterson Implement Pallet Forks , 4" x 42", 45" wide, quick attach, in good condition ...[more]

Notch Bale Spear , Quick attach, 2-38" spears, in good condition ...[more]

J.C.B. Loader Bucket , 8' x 48" x 42" ...[more]

Hyster 540E Forklift , SN: 0002002024W Meter reads: 1,268 hours Fuel type: Propane Load capacity: 4,700 lb. at 24" Stage mast: 2 Mast height: 78" ...

Rims with Tires for Skid Steer , 10-16.5 tires

Fork Extensions , 6" x 60" ...[more]

Norden Trailer Mover , Slips over forks, 2 5/16" ball plus Reese hitch ...[more]

Lane Modular Sawmill , (1st of an entirety) 2 dog carriage, 15' long carriage, hydraulic setworks and dogs, 44 1/2" x 48' track, 56" saw blade (ne...

John Deere Power Unit , (Part of an entirety) Model: 6076 Turbo, 6 cylinder, used one year since rebuilt. Item will be sold offsite. Location: N 2...

Fuel Tank , (Part of an entirety) 265 gallons. Item will be sold offsite. Location: N 2567 CR B, Gilman WI 54433

2 Strand Log Deck , (Part of an entirety) 6' x 20' plus 3' nose skids, hydraulic drive. Item will be sold offsite. Location: N 2567 CR B, Gilman W...

Log Turner , (Part of an entirety) 36" chain type, hydraulic drive. Item will be sold offsite. Location: N 2567 CR B, Gilman WI 54433 ...[more]

Hydraulic Pump and Tank , (Part of an entirety) Kawasaki pump-type K3VL45/B-SN: 88KL298642, pump is mounted on overhung load adapter, 10" x 10" x ...

Lane Mill Entirety of Lots 250-255 , With 10% raise. Item will be sold offsite. Location: N 2567 CR B, Gilman WI 54433

Fuel Tank on Stand , 265 gallons. Item will be sold offsite. Location: N 2567 CR B, Gilman WI 54433

Zank Machine Edger , 4 blade set up, 1 moving saw, 20" inserted tooth blade, 18" x 9' dust belt, no power, set up for line shaft, 7" x 36" capacit...

J.C.B. Dust Blower , 14" inlet, 12" outlet, 30" blower, no power, one year old. Item will be sold offsite. Location: N 2567 CR B, Gilman WI 54433 ...

Steel Dust Pipe , 8" x 70', stainless steel elbow, blower adapter. Item will be sold offsite. Location: N 2567 CR B, Gilman WI 54433 ...[more]

Procut Chop Saw , 22" blade, hydraulic drive, line infeed rolls with clamp, board stops, manual operation, 20 1/2 x 10' infeed and outfeed rolls. ...

Hydraulic Pump and Tank , Pump mounted on overhung load adapter, 18" x 18" x 20" tank, cooling fan. Item will be sold offsite. Location: N 2567 CR...

Line Shafts on Steel A Frame , 1-has 2" x 10'6" shaft with pulleys and bearings, and belts, 10'4" high, 4" x 6" tubing, 1-2" x 18' shaft with pull...

Dead Rolls , 1-28" x 6' with one live roll, 6 1/2" x 24" rolls, 1-32" x 14', 4" x 24" rolls. Item will be sold offsite. Location: N 2567 CR B, Gil...

2 Head Baker Band Resaw , (1st of an entirety) Model: BBR-0, SN: 93-554, 7/8" x 28" band wheels, side press rolls, 1 1/4" bands, 6" feed, hydrauli...

Zank Machine Cant Sizer , (Part of an entirety) 4" head with indexing bits, setup for line shaft. Item will be sold offsite. Location: N 2567 CR B...

Baker Deduster , (Part of an entirety) Model: BDD-O, SN: 95-183, 3 brush heads, set up for line shaft. Item will be sold offsite. Location: N 2567...

Baker Transfer Landing Belt , (Part of an entirety) 32" x 6', hydraulic drive. Item will be sold offsite. Location: N 2567 CR B, Gilman WI 54433 ...

Baker 4 Tier Stacking Rack , (Part of an entirety) Swiveling on casters, 40" x 42" x 78". Item will be sold offsite. Location: N 2567 CR B, Gilman...

J.C.B. Dust Blower , (Part of an entirety) 30", 14" inlet, 12" outlet, no power, like new condition. Item will be sold offsite. Location: N 2567 C...

Steel Dust Pipe , (Part of an entirety) 8" x 70', spiral pipe. Item will be sold offsite. Location: N 2567 CR B, Gilman WI 54433 ...[more]

Line Shafts and Hydraulic Pump , (Part of an entirety) 1 1/2" x 9' shaft with pulleys, bearings, and belts. 1 1/8' x 16' shaft with pulleys, beari...

John Deere Power Unit , (Part of an entirety) Meter reads: 14,170 hours, 4 cylinder, air compressor not working. Runs good. Item will be sold offs...

Fuel Tank , (Part of an entirety) 265 gallons. Item will be sold offsite. Location: N 2567 CR B, Gilman WI 54433

Baker Resaw Entirety of Lots 265-274 , With 10% raise. Item will be sold offsite. Location: N 2567 CR B, Gilman WI 54433

56" Circular Saw , Shoulder damage. Item will be sold onsite. ...[more]

56" Circular Saw , Bend. Item will be sold onsite. ...[more]

56" Circular Saw , Damage. Item will be sold onsite. ...[more]

V8 Diesel , Needs rebuilt. Item will be sold offsite. Location: N 2567 CR B, Gilman WI 54433

Pallet Jack , 8500 lb. capacity, 27" x 48", works ...[more]

Banding Cart , Some poly strapping, tightener and crimper

Banding Cart , Steel strapping, A-333 tightener and crimper tool

Steel Strapping , 3/4" new strapping, 11 rolls. Item will be sold offsite. Location: N 2567 CR B, Gilman WI 54433 ...[more]

3 Strand Green Chain , 9' x 20', rooftop chain, electric drive, 119" trucking width. Item will be sold offsite. Location: N 2567 CR B, Gilman WI 5...

Meadows Edger , SN: 305-124X-84, 3 saws, 1 moving saw, 15" blades, 5" x 30" capacity, 34" x 8' infeed, 34" x 7' outfeed, no power. Has a new arbor...

2 Strand Log Deck with Stop'N'Load , 6' x 22', includes chain, no drive. Item will be sold offsite. Location: N 2567 CR B, Gilman WI 54433 ...[mo...

Phelps Fan Dust Blower , Model: 26KS, 13" inlet, 9" outlet, no power. Item will be sold offsite. Location: N 2567 CR B, Gilman WI 54433 ...[more]

Dust Blower , 24", adapter for 4-6" pipe, 10" inlet, 9" x 10" outlet, no power ...[more]

Cummins Engine with Transmission , Model: NTC 350, 300 hp, transmission and drive shaft, in truck frame, Murphy controls, runs good. Item will be ...

Bandsaw Blades , 50 new pieces (quantity may change till sale), 1 1/4", for Baker resaw. Item will be sold offsite. Location: N 2567 CR B, Gilman ...

Blade for Chopsaw , 22", fresh resharpened. Item will be sold onsite ...[more]

Propane Tank , For tow motor, empty.�Item will be sold onsite ...[more]

Propane Tank , For tow motor, empty. Item will be sold onsite

Propane Tank , For tow motor, empty. Item will be sold onsite

Honda Engine GX620 , 20 hp, new rebuilt. Item will be sold onsite

Anti Freeze , 2 full cases plus 3 gallons. Item will be sold onsite

{ Choice of lots: 297 } Purus 15W-40 Motor Oil , 5 gallon bucket, heavy duty, Synthetic blend. Item will be sold onsite

{ Choice of lots: 298, 299, 300, 301 } Purus 15W-40 Motor Oil , 5 gallon bucket, heavy duty, Synthetic blend. Item will be sold onsite