Cleereman Operator's Cab, (Part of an entirety) 6' x 6' x 81", heat and AC, no controls, no support

Transfer Belt, (Part of an entirety) Outfeed from gang saw, 57" x 47', slight drop at 20', 48" belt, electric drive, one end support posts to grou...

Gang Saw Blades, (Part of an entirety) 29 pieces, 31", 5" arbor

Crosby Gang Saw of Lots 137-141, With 10% raise.

Crosby Gang Saw Shaft, New shaft, 4 7/16" mand with 3 sections, #3 1/2 retec splines, to run thin kerf blades ...[more]

Spacers to Run Thin Kerf Blades*,

Saw Blades*, Thin Kerf blades, approx. 87 pieces

Spacer Dressing Grinder*, Polishes spacers between thinkerf saw blades. 

Infeed 4 Strand Transfer Deck to Gang Saw, 9'6" x 20'6" plus 3' feed chain with stop, on incline, on right side of gang saw, solid wood decking, o...

4 Strand Infeed Deck to Gang Saw, 9'6" x 15'6" plus 30" feed chain with stop, on incline, on left side of gang saw, solid wood decking, one end le...

Crosby Edger, SN: CC-4008, Size: 42, 2 moving saws, 19" saws, saw lubricating system, 6" x 42" capacity, laser lights, 3" arbor, 4" arbor on saws,...

Cleereman Operator's Cab, 54" x 77" x 81", 32" leg supports, insulated with AC unit ...[more]

Mellott 4 Strand Transfer Deck, 12' x 9'6" on end pop-up, includes 2 air cylinder, board stop, on end legs to first I-Beams only, electric drive ...

4 Strand Transfer Deck, 10' x 35', solid wood decking, H-78-B rooftop chain, electric drive, no support posts ...[more]

Mellott Rollcase with Pop-Up Transfer, 38" x 14', 9" x 30" rolls, 4 strand 9'6" pop-up transfer, electric drive ...[more]

Live Rollcase, 28" x 28', 6 1/2" x 24" rolls, no drive, legs to first I-Beam only ...[more]

Live Rollcase with Side Transfer Chains, 28" x 20', 6 1/2" x 24" rolls, 8' x 4' pop-up chains with electric drive, no drive on rolls, board stop, ...

Live Rollcase, 28" x 23', 6 1/2" x 24" rolls, legs to first I-Beam only, electric drive that also powered lot 150 and 151 ...[more]

Live Rollcase, 27" x 26', 6 1/2" x 19" rolls, press down roll on one end, electric drive, legs to first I-Beam only ...[more]

Rollcase with Pop-Up Side Transfer, 40" x 14', 9" x 30" rolls, 4 strand pop-up transfer 9'8" x 4'6", flip up board stop, electric drive, legs to f...

Live Rollcase, 28" x 70', 6 1/2" x 24" rolls, flip up board stop, electric drive, legs to first I-Beam only ...[more]

4 Strand Transfer Deck, 9'9" x 58', 4-4' sections slant steel decking, rest is wood, H78B rooftop chain, support to ground ...[more]

5 Strand Transfer Deck, 9'4" x 32', side pan on each side and pan on end not included, electric drive, no support structure ...[more]

4 Strand Green Chain, 10' x 94', wood decking, H78B rooftop chain, steps on side, electric drive ...[more]

4 Strand Green Chain, 10' x 42 1/2', H78B rooftop chain, electric drive ...[more]

3 Strand Tie Landing Deck, 9'6" x 10'6", heavy I-Beam built ...[more]

Lumber Carts, 6 pieces, 52" x 7', steel wheels, one side stakes ...[more]

Lumber Carts, 3 pieces, 52" x 8', bunks are 6' apart, one side has stake, steel wheels ...[more]

Lumber Carts, 5 pieces total, 50" x 7', one has headboard, 3 have steel wheels, 2 have poly wheels

Lumber Carts, 40" x 70" cart with 48" x 66" bunks, 1 side posts, 2 pieces have poly wheels, 4 pieces have steel wheels ...[more]

Simonds Circular 56" Saw, Hammered LH650 rpm, F8 style, good saw ...[more]

Simonds Circular 56" Saw, Hammered LH650 rpm, F8 style, good saw ...[more]

Simonds Circular 56" Saw, Hammered LH650 rpm, F8 style, good saw ...[more]

Simonds Circular 56" Saw, Hammered LH650 rpm, F8 style, good saw ...[more]

Simonds Circular 56" Saw, Hammered LH650 rpm, F8 style, good saw ...[more]

Simonds Circular 56" Saw, Hammered LH650 rpm, F8 style, good saw ...[more]

Simonds Circular 56" Saw, Hammered RH650 rpm, F8 style, good saw ...[more]

Simonds Circular 56" Saw, Hammered RH650 rpm, F8 style, good saw ...[more]

Simonds Circular 56" Saw, Hammered RH650 rpm, F8 style, good saw ...[more]

Simonds Circular 56" Saw, Hammered RH650 rpm, F8 style, good saw ...[more]

Edger Saw Blades, 8 pieces, 19" blades, 4" arbor size ...[more]

Mellott Vibrating Conveyor, 34" x 77', 24" pan, 8" sides, electric drive ...[more]

Mellott Vibrating Conveyor, 34" x 84', 24" pan, 8" sides, electric drive ...[more]

Mellott Vibrating Conveyor, 34" x 50', 24" pan, 8" sides, electric drive ...[more]

Mellott Vibrating Conveyor, 34" x 50', 24" pan, 8" sides, angle on end, electric drive, no support structure ...[more]

Mellott Vibrating Conveyor, 29" x 60', 24" pan, 8" sides, angle cut on end, electric drive ...[more]

Mellott Vibrating Conveyor, 29" x 50', 24" pan, 8" sides, electric drive ...[more]

Mellott Vibrating Conveyor, 29" x 64', 24" pan, 8" sides, electric drive ...[more]

Structure Steel, All structural steel not otherwise lotted with equipment, catwalks and stairs, steel grating for decking, side pans

Curtis Air Compressor, Model: RS100D, SN: 6595G98010, meter reads: 15,527 hours, capacity: 450 cfm, 100 hp, electric, includes air intake pipe to ...

Airtak Dryer, Model: HDL350, SN: 98-07-025, capacity 350 cfm at 100 psi, heatless air dryer, includes pipe from compressor to first tank

Air Tank, 500 gallon

Air Tank, 500 gallon

Air Lines, Lots of 2" steel pipe and smaller, all air lines to equipment ...[more]

Precision Chipper, (1st of an entirety) 60", 4 knives, no power

Electric Motor, (Part of an entirety) 200 hp, 1780 rpm, frame 447T

Precision Shaker Screen, (Part of an entirety) SN: S2856, 7' x 7' screen, support to ground, electric drive

Chip Cyclone, (Part of an entirety) 5', includes pipe to chipper

Precision Chipper Entirety of Lots 200-204, With 10% raise.

Mellott Vibrating Conveyor, 41" x 60', 30" pan, 8" sides, screen section, electric drive ...[more]