Air Tank, 1000 gallon tank.

Sullivan Palatek Air Compressor, Model: 30DG, SN: W054543, 30 hp. Electric motor, meter reads 29,041 hours, 480 volt, 3 phase, screw type compress...

Champion Air Dryer, Model: CRN125A1, SN: RC1J0125AB1A2NM09131, refrigeration type, air dryer,125 CFM, 115V single phase, condition unknown.

Air Tank, 500 gallon tank, including air lines in building.

Edging Slide Pan, 5’ x 16’ steel frame with black HUMW.

Live Roll Case, Drive Type: Electric. Overall Dimensions: 32” x 19’. Roller Size: 6.5 x 24”. Shaft Size: 1 7/16”.

4 Strand Transfer, # of Strands: 4. Chain Type: HLU and roller. Drive Type: Electric. Overall Dimensions: 11’ 6” x 17’. Features and Notes: 6’ pop...

Dead Rolls, Drive Type: None. Overall Dimensions: 18’ x 15’. Roller Size: 1 1/4” x 15 1/2”.

Shop Built Roll Case, Drive Type: Electric. Overall Dimensions: 33” x 40’. Roller Size: 6.5” x 24”. Shaft Size: 1 7/16”.

Morbark 58 Chipper, Serial #: 850. Model: 58. # of Knives: 3. Discharge: Top. Drive Type: None. Features and Notes: (Part of an entirety) Includes...

US Motors Electric Motor, Horsepower: 100. Frame Size: 405T. Phase: 3 Phase. RPM: 1780. Features and Notes: (Part of an entirety) Used on chipper.

Electric Motor Soft Start, (Part of an entirety) Ben Shaw soft start, MN RB 2–1–S–156A–14C, SN: S201300719-1-1, includes conduit and wire two moto...

Chip Shaker Screen, Drive: Electric. Size: 5’ x 5’. Features and Notes: (Part of an entirety) Includes framework to ground.

Chip Cyclone, (Part of an entirety) 5’ cyclone pipe to chipper.

Morbark Chipper Entirety of Lots 157-161, With 10% raise.

Chip Belt Conveyor, Length: 42’. Belt Width: 22”. Drive Type: Electric. Overall Width: 25”. Features and Notes: Heavy duty shop built, on incline.

Mellott Vibrating Conveyor, Drive Type: Electric. Overall Dimensions: 29” x 80’. Pan Width: 24”. Size: 29”. Features and Notes: 8” sides, 15 hp el...

Troyer Machine Dust Blower, (1st of an entirety) Drive Type: Electric. Includes Pipe: No. Inlet Size: 13”. Outlet Size: 10”. Size: 26”. Features a...

Blower Pipe, (Part of an entirety) 10” x approximately 200’ steel pipe, does not include adapter on cyclone. Has stainless steel elbows

Troyer Machine Dust Cyclone, (Part of an entirety) 6’ diameter, larger cyclone on dust bin, 12” inlet includes adapter.

Troyer Machine Dust Cyclone, (Part of an entirety) 4’ diameter, smaller cyclone on dust bin, includes 10'' pipe adapter.

Dust System Entirety of Lots 165-168, With 10% raise.

Spiral Roll Case, Drive Type: Electric. Overall Dimensions: 21” x 22’. Roll Type: Smooth Spiral. Roller Size: 6.5 x 16”. Shaft Size: 1 7/16”. Feat...

Four Strand Unscrambler, 11’ x 61”, electric drive.

5-Strand Unscrambler, 12’ x 8’ 6” x 6’ tall plus 3’ transfer with side roller chain, all chains included.

Concave Belt Conveyor, Electric drive, 40' long, 53" overall width, 42" belt width, elevated to 15' height

Spiral Roll Case, Drive Type: Electric. Overall Dimensions: 24” x 22’. Roll Type: Smooth Spiral. Roller Size: 6.5” x 16”. Shaft Size: 1 7/16”. Fea...

Scrap Belt Conveyor, Length: 21’6”. Belt Width: 6”. Drive Type: Electric. Overall Height: 30”. Overall Width: 8”. Features and Notes: Beside green...

Scrap Belt Conveyor, Length: 17’. Belt Width: 5”. Drive Type: Electric. Overall Width: 6”. Features and Notes: Beside green chain for cutoffs to v...

Shop Built Lumber Green Chain, Length: 50’. Width: 10’. # of Strands: 3. Drive Type: Electric. Height: 36”. Rooftop Chain: No. Solid Decking: Yes....

Laser Lights, 5 pc. lasers above grading deck, 110V.

Laser Lights and Parts, 5pc lasers, holders, wires, condition unknown.

Lumber Carts, 2 piece lumber carts, 42” x 44”, poly wheels, solid back bar for a cross top, 4 carts.

Lumber Carts, 2 piece lumber cart, solid back, poly wheels, 42 x 44, spacer bar for top, 4 carts.

Lumber Carts, 42” x 7’, 4 carts, 3 have poly wheels, swivel casters, 1 has steel wheels, swivel casters, does not include lumber on 1 cart.

Lumber Carts, 3 carts, polly wheels, 2 have casters, 1 pc. 42” x 8’, 1 pc. 42” x 7’, 1 pc. 42” x 6’.

Lumber Carts, 42“ x 7‘, poly and steel wheels, castors on 1 end, 3 carts.

Lumber Carts, 42“ x 8‘, poly wheels, casters on one end, 3 carts.

Lumber Carts, 2carts, poly wheels, 42” x 8’, swivel casters.

Lumber Carts, 4 carts, poly and steel wheels 42“ x 7’.

Lumber Dip Tank, 6' x 19' stainless steel liner

Lumber Dip Tank, 6' x 21', stainless steel liner

Information Lot*, Thorburg Lumber- Corley Mill Liquidation! Lots 530-549 are sold offsite! Location is 5978 L Road, Waterloo, IL 62298. Call Eugen...

Corley 3 HB LP Carriage**, (1st of an entirety)  110 V over air controls, cant kickers, pantograph arm with support post, no controls, 16' x 10' o...

Lewis Scanner Controls for Carriage**, (Part of an entirety) 20' scanner bar, includes mounting beam, all controls in cab related to Lewis control...

Corley 56" Circular Husk**, (Part of an entirety) 56" saw, 42" topsaw, 24" x 6' live off bear belt, 21" belt, saw wrench, no power. Contact Myron ...

Lincoln Electric Motor**, (Part of an entirety) 200 hp, 1785 rpm, 445T frame, 600 amp, 480 V fuse box. Contact Myron Nissley with any questions 57...

Baldor Solid State Soft Start**, (Part of an entirety) 200 hp. Contact Myron Nissley with any questions 574-536-2481

Corley Operators Cab**, (Part of an entirety) 11' x 54", no controls. Contact Myron Nissley with any questions 574-536-2481

Hydraulic Pack for Carriage Controls Berendsen Fluid Power**, (Part of an entirety) 20 hp electric, 15 gallon per min., 1800 psi, 60 gallon tank, ...

Carriage Track and Frame**, (Part of an entirety) 54 1/2' center to center x 55', end stops, no support structure. Contact Myron Nissley with any ...

Tyrone Berry Shotgun Feed Carriage Drive**, (Part of an entirety) 100 hp electric, directional valves, hydraulic lines to cylinder, electric cutou...

WYE Delta Starter and Cutout**, (Part of an entirety) 100 hp, cutout box, used on carriage feed. Contact Myron Nissley with any questions 574-536-...

Corley Mill Entirety of Lots 530-539**, With 10% raise. Contact Myron Nissley with any questions 574-536-2481

Corley Bar Type Log Turner**, 5' bar, hydraulic drive, control valve in cab. Contact Myron Nissley with any questions 574-536-2481

Electric Hydraulic Pack**, 50 hp motor, 34" x 23" x 25" tank, line to valve and turner. Contact Myron Nissley with any questions 574-536-2481

Corley 3 Strand Log Deck**, 11' x 48' includes 4' nose skids, 13'8" overall width with side rail, electric drive, hydraulic stop'n'load, INCLUDES ...

Husk Wrenches**, 1 wrench, 2 tooth setters, 1 crowbar. Contact Myron Nissley with any questions 574-536-2481

Corley Parts for Carriage and Husk**, Dogs for carriage, bearings for carriage, cant kicker cylinders, computer control board, saw guides, Joystic...

Cylinders and Parts**, New air cylinder for cant pusher 6" bore 40" stroke, cylinder for carriage. Contact Myron Nissley with any questions 574-53...