52
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
Accept Cookies Learn MoreLot
52
1- Used Vorti- Siv RVM22E 20'' Sieving and Separation Machine
TECHNICAL DATA: • Electric Vibrating Motor 1/6, 1/3 or 1/2HP, 1 or 3 Phase, continuous duty, DIV II or XP, ATEX Zone 20-22, 50/60HZ, 1800 or 3600RPM. • Variable Frequency Drive-Optional • Clamps: Four(4) Sanitary Heavy-Duty or Toggle/Pan. Nickel Plated Carbon Steel or all Stainless Steel. • Contact Parts: 304/316 Stainless Steel with brush finish or 15ra/electro-polish. • Non-Contact Parts: Carbon Steel Powder Coated Finish or all 304/316 Stainless Steel. • Motor: All 304 Stainless Steel Enclosure or Powder Coated Safety Orange or FDA White Epoxy. • Screens: Pre-tensioned epoxy bonded or silver solder. Removable Mesh Ring with Clip. Stainless or Nylon Mesh. • Ultra-sonic fine mesh de-blinding kit available on all types. • Dimensions: 20” x 20” x 2” high square tube base only, 3/8” plate base only or Four-legged portable support frame with discharge height as required. Optional telescoping legs. • Weight: 105-200lbs
All RVM® models are utilized as compact portable sieves. The center or side discharge of each model, along with a heavy duty stand, enable efficient container to container screening.
These 1800 or 3600 RPM units are extremely effective on many wet or dry applications. Popular uses include quality control security screening of powders, liquid straining, product reclamation and particle separation.
The typical unit height ranges form 10” to 18” depending on the main rim specified. The RVM®-E series is driven by a selection of 1800 or 3600 RPM of vibratory electric motors from 1/6HP to 1HP
MDL: RVM22e
SN: 22128E
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: Santa Fe Springs, CA
Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.
Pharmaceutical Machinery Auction (Multiple Locations)
Auction Date: lots start closing on Thursday, July 23rd at 10:00 am PST
Please Note: the assets are located in multiple locations.
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
1- Used Vorti- Siv RVM22E 20'' Sieving and Separation Machine
TECHNICAL DATA: • Electric Vibrating Motor 1/6, 1/3 or 1/2HP, 1 or 3 Phase, continuous duty, DIV II or XP, ATEX Zone 20-22, 50/60HZ, 1800 or 3600RPM. • Variable Frequency Drive-Optional • Clamps: Four(4) Sanitary Heavy-Duty or Toggle/Pan. Nickel Plated Carbon Steel or all Stainless Steel. • Contact Parts: 304/316 Stainless Steel with brush finish or 15ra/electro-polish. • Non-Contact Parts: Carbon Steel Powder Coated Finish or all 304/316 Stainless Steel. • Motor: All 304 Stainless Steel Enclosure or Powder Coated Safety Orange or FDA White Epoxy. • Screens: Pre-tensioned epoxy bonded or silver solder. Removable Mesh Ring with Clip. Stainless or Nylon Mesh. • Ultra-sonic fine mesh de-blinding kit available on all types. • Dimensions: 20” x 20” x 2” high square tube base only, 3/8” plate base only or Four-legged portable support frame with discharge height as required. Optional telescoping legs. • Weight: 105-200lbs
All RVM® models are utilized as compact portable sieves. The center or side discharge of each model, along with a heavy duty stand, enable efficient container to container screening.
These 1800 or 3600 RPM units are extremely effective on many wet or dry applications. Popular uses include quality control security screening of powders, liquid straining, product reclamation and particle separation.
The typical unit height ranges form 10” to 18” depending on the main rim specified. The RVM®-E series is driven by a selection of 1800 or 3600 RPM of vibratory electric motors from 1/6HP to 1HP
MDL: RVM22e
SN: 22128E
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: Santa Fe Springs, CA
General delivery information available from the auctioneer
Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.
Pharmaceutical Machinery Auction (Multiple Locations)
Auction Date: lots start closing on Thursday, July 23rd at 10:00 am PST
Please Note: the assets are located in multiple locations.
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com