12
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
Accept Cookies Learn MoreLot
12
1 Used Sollich Enromat M5 Top Enrober
Dimensions: 51" wide belt 1.75" tall opening
Type: M5 1300
No: 8116001
Mfg. Date: 2005/12
Volts: 460
kVA: 19.5
Hz: 60
Phase: 3
Belt Width: 1295 mm
Belt Speed: 2-8 m/min
Weight: 2400 kg
Compressed Air Supply: 4-10 bar
Dimensions: 1950mm x 2130mm x 2100mm
Operating Height: 950mm
Production Rate: 1000 Lbs/Hr
Information:
The coating machine Enromat M5 is a machine without built-in tempering device and is used for two different applications:
1. Processing of fat coatings, where it is used generally direct, which means without the tempering machine. The level switch installed in the sump, which controls the feed pump on the tank is used for the automatic, subsequent supply of product mass.
2. When processing pure chocolate masses the Enromat M5 must be connected to an external tempering machine. This system of coaters with installed tempering facilities is preferred in the following instances:
The external tempering machine will feed a continuous and constant quantity of freshly tempered chocolate to the coater. The quantity supplied is in every case greater than the amount of chocolate required. The mass level in the coater sump is kept constant in the coater sump by means of a level switch which in turn controls a return pump.
A large selection of accessory units such as curtain rollers, bottom stripping device, turn over device, holding down device, decorating device and downstream sprinkling device permit optimal adaptation to the product-related requirements.
Sum of lots 1- 45 must exceed the price of lot 0A in order for individual items to sell.
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: Gardena, CA
Load Out: $1560
Skidding: $910
Category: Chocolate, Caramel, Nuts, Nut, Peanuts, Macadamian, Candy, Sweets, Cookie, Treat, Confectionary, Cooking, Bakery, Dessert, Mold, Hawaiian Host, Cake, Sweet
PICKUP:
Pickup to begin on October 7th, 2020 after cleared by payment. All pickups must be complete by October 21st, 2020 at 1pm PDT or equipment will be considered abandoned.
RIGGING:
There is no self-rigging. All Rigging and Loadout will be completed by a contracted and approved Rigger.
IMPORTANT INFORMATION
AUCTION DATE:
LOTs start closing on Thursday, October 1st, 10:00 am PDT
LOCATION:
Gardena, California
PICKUP:
Pickup to begin on October 7th, 2020 after cleared by payment. All pickups must be complete by October 21st, 2020 at 1pm PDT or equipment will be considered abandoned.
RIGGING:
There is no self-rigging. All Rigging and Loadout will be completed by a contracted and approved Rigger.
INSPECTION DATES
September 28nd, from 7am - 1pm PDT and September 29th, from 7am - 1pm PDT by Appointment Only. We are able to accomodate in-person or live video. Please email our Sales Department at sales@hillseth.com to schedule an appointment.
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
1 Used Sollich Enromat M5 Top Enrober
Dimensions: 51" wide belt 1.75" tall opening
Type: M5 1300
No: 8116001
Mfg. Date: 2005/12
Volts: 460
kVA: 19.5
Hz: 60
Phase: 3
Belt Width: 1295 mm
Belt Speed: 2-8 m/min
Weight: 2400 kg
Compressed Air Supply: 4-10 bar
Dimensions: 1950mm x 2130mm x 2100mm
Operating Height: 950mm
Production Rate: 1000 Lbs/Hr
Information:
The coating machine Enromat M5 is a machine without built-in tempering device and is used for two different applications:
1. Processing of fat coatings, where it is used generally direct, which means without the tempering machine. The level switch installed in the sump, which controls the feed pump on the tank is used for the automatic, subsequent supply of product mass.
2. When processing pure chocolate masses the Enromat M5 must be connected to an external tempering machine. This system of coaters with installed tempering facilities is preferred in the following instances:
The external tempering machine will feed a continuous and constant quantity of freshly tempered chocolate to the coater. The quantity supplied is in every case greater than the amount of chocolate required. The mass level in the coater sump is kept constant in the coater sump by means of a level switch which in turn controls a return pump.
A large selection of accessory units such as curtain rollers, bottom stripping device, turn over device, holding down device, decorating device and downstream sprinkling device permit optimal adaptation to the product-related requirements.
Sum of lots 1- 45 must exceed the price of lot 0A in order for individual items to sell.
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: Gardena, CA
Load Out: $1560
Skidding: $910
Category: Chocolate, Caramel, Nuts, Nut, Peanuts, Macadamian, Candy, Sweets, Cookie, Treat, Confectionary, Cooking, Bakery, Dessert, Mold, Hawaiian Host, Cake, Sweet
PICKUP:
Pickup to begin on October 7th, 2020 after cleared by payment. All pickups must be complete by October 21st, 2020 at 1pm PDT or equipment will be considered abandoned.
RIGGING:
There is no self-rigging. All Rigging and Loadout will be completed by a contracted and approved Rigger.
IMPORTANT INFORMATION
AUCTION DATE:
LOTs start closing on Thursday, October 1st, 10:00 am PDT
LOCATION:
Gardena, California
PICKUP:
Pickup to begin on October 7th, 2020 after cleared by payment. All pickups must be complete by October 21st, 2020 at 1pm PDT or equipment will be considered abandoned.
RIGGING:
There is no self-rigging. All Rigging and Loadout will be completed by a contracted and approved Rigger.
INSPECTION DATES
September 28nd, from 7am - 1pm PDT and September 29th, from 7am - 1pm PDT by Appointment Only. We are able to accomodate in-person or live video. Please email our Sales Department at sales@hillseth.com to schedule an appointment.
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com