13
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
Accept Cookies Learn MoreLot
13
1 Used Sollich Thermoflow Cooling Tunnel Conveyor and Control Panel
Dimensions: 51" wide belt 2.5" opening 103' long
Type: LSK 1300
No: 8116004
Mfg. Date: 2005/12
Volts: 480
kVA: 12.5
Hz: 60
Information
This cooling tunnel is specially designed for cooling product fillings and slab cooling in high-output production lines. KK Dairy is designed with the focus on hygiene and easy cleaning, the tunnel features full wash down capability and enhances wipe cleaning to reduce potential bacterial growth.
The cooling tunnel is fitted with one (two) heat exchanger units together with their respective water separators and the radial fans for two (four) cooling zones.
The cooling unit installed in the cooling tunnel have a suction gas controlled refrigerant circuit with performance reduction. The refrigerant circuit corresponds to a single-stage refrigeration unit, consisting of a compressor, condenser, expansion valve, and evaporator.
The Type LSK Thermo-Flow® plus cooling tunnel from SOLLICH is a universal cooling tunnel with air cooling incorporating all the special features of the Thermo-Flow® plus series. The cooling tunnels are designed as a modular system and consist of sections 3 m in length. Because of their precision fit, the polyurethane hoods are airtight and do not need a seal. Energy-saving CFC-free insulation is of course a standard feature, and the equipment naturally complies with GMP guidelines.
Contact cooling from beneath and radiation or convection cooling from above ensure optimum conditions for each product. Depending on their length, the cooling tunnels can be divided into 2, 4 or 6 zones which can be individually regulated in terms of
Website: http://www.sollichna.com/products/product-lines-by-sollich/thermo-flow-plus-cooling-tunnels/cooling-tunnel-type-lsk
Sum of lots 1- 45 must exceed the price of lot 0A in order for individual items to sell.
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: Gardena, CA
Load Out Only: $4,550.00
Category: Chocolate, Caramel, Nuts, Nut, Peanuts, Macadamian, Candy, Sweets, Cookie, Treat, Confectionary, Cooking, Bakery, Dessert, Mold, Hawaiian Host, Cake, Sweet
PICKUP:
Pickup to begin on October 7th, 2020 after cleared by payment. All pickups must be complete by October 21st, 2020 at 1pm PDT or equipment will be considered abandoned.
RIGGING:
There is no self-rigging. All Rigging and Loadout will be completed by a contracted and approved Rigger.
IMPORTANT INFORMATION
AUCTION DATE:
LOTs start closing on Thursday, October 1st, 10:00 am PDT
LOCATION:
Gardena, California
PICKUP:
Pickup to begin on October 7th, 2020 after cleared by payment. All pickups must be complete by October 21st, 2020 at 1pm PDT or equipment will be considered abandoned.
RIGGING:
There is no self-rigging. All Rigging and Loadout will be completed by a contracted and approved Rigger.
INSPECTION DATES
September 28nd, from 7am - 1pm PDT and September 29th, from 7am - 1pm PDT by Appointment Only. We are able to accomodate in-person or live video. Please email our Sales Department at sales@hillseth.com to schedule an appointment.
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
1 Used Sollich Thermoflow Cooling Tunnel Conveyor and Control Panel
Dimensions: 51" wide belt 2.5" opening 103' long
Type: LSK 1300
No: 8116004
Mfg. Date: 2005/12
Volts: 480
kVA: 12.5
Hz: 60
Information
This cooling tunnel is specially designed for cooling product fillings and slab cooling in high-output production lines. KK Dairy is designed with the focus on hygiene and easy cleaning, the tunnel features full wash down capability and enhances wipe cleaning to reduce potential bacterial growth.
The cooling tunnel is fitted with one (two) heat exchanger units together with their respective water separators and the radial fans for two (four) cooling zones.
The cooling unit installed in the cooling tunnel have a suction gas controlled refrigerant circuit with performance reduction. The refrigerant circuit corresponds to a single-stage refrigeration unit, consisting of a compressor, condenser, expansion valve, and evaporator.
The Type LSK Thermo-Flow® plus cooling tunnel from SOLLICH is a universal cooling tunnel with air cooling incorporating all the special features of the Thermo-Flow® plus series. The cooling tunnels are designed as a modular system and consist of sections 3 m in length. Because of their precision fit, the polyurethane hoods are airtight and do not need a seal. Energy-saving CFC-free insulation is of course a standard feature, and the equipment naturally complies with GMP guidelines.
Contact cooling from beneath and radiation or convection cooling from above ensure optimum conditions for each product. Depending on their length, the cooling tunnels can be divided into 2, 4 or 6 zones which can be individually regulated in terms of
Website: http://www.sollichna.com/products/product-lines-by-sollich/thermo-flow-plus-cooling-tunnels/cooling-tunnel-type-lsk
Sum of lots 1- 45 must exceed the price of lot 0A in order for individual items to sell.
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: Gardena, CA
Load Out Only: $4,550.00
Category: Chocolate, Caramel, Nuts, Nut, Peanuts, Macadamian, Candy, Sweets, Cookie, Treat, Confectionary, Cooking, Bakery, Dessert, Mold, Hawaiian Host, Cake, Sweet
PICKUP:
Pickup to begin on October 7th, 2020 after cleared by payment. All pickups must be complete by October 21st, 2020 at 1pm PDT or equipment will be considered abandoned.
RIGGING:
There is no self-rigging. All Rigging and Loadout will be completed by a contracted and approved Rigger.
IMPORTANT INFORMATION
AUCTION DATE:
LOTs start closing on Thursday, October 1st, 10:00 am PDT
LOCATION:
Gardena, California
PICKUP:
Pickup to begin on October 7th, 2020 after cleared by payment. All pickups must be complete by October 21st, 2020 at 1pm PDT or equipment will be considered abandoned.
RIGGING:
There is no self-rigging. All Rigging and Loadout will be completed by a contracted and approved Rigger.
INSPECTION DATES
September 28nd, from 7am - 1pm PDT and September 29th, from 7am - 1pm PDT by Appointment Only. We are able to accomodate in-person or live video. Please email our Sales Department at sales@hillseth.com to schedule an appointment.
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com