16
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
Accept Cookies Learn MoreLot
16
1 Used lot of 38 Drying Tumblers for Soft Gel
Type: SGJ-II
Capacity: 45 Kg
Volts: 480
Kw: 0.75
Speed: 29 r/min
S/N: 15012
Mfg. Date: 14/4/2016
General Information:
The drying process requires an environment with low relative humidity in the air but not hot air. This process is divided into two stages: Tumble drying, and air drying.
These tumblers tumble the softgels around 30 to 40 minutes and remove approximately 25 percent of the water content in the softgel capsules. Then softgel capsules are spread on stackable trays and transferred to the drying room or tunnel where high air flow exists and they stay around 24 to 48 hours or until the softgels become hard enough. This process is called natural manual drying.
Fluid Bed Drying can be used for shape forming and final drying of soft gel capsules. The tumbler quantity can be chosen as the production requirement. Each tumbler can rotate in both directors. The tumbler can be controlled automatically by a PLC system with an encapsulation machine when connected to the master station during the forming process or controlled manually during the pre-drying process. Water content in the gelatin film can be reduced from 45% to 35% during the forming process, and it can be decreased to around 25% in the pre-drying process.
Dry mode: Fluid Bed, the system can blow the capsule to fluidized, which minimizes the friction between the capsules and the inner surface of the tumbler. Increase much effectively of drying.
Sum of lots 5- 18 must exceed the price of lot 4A in order for individual items to sell.
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: Quitman, Texas
Load Out: $10,088.00
Skidding: $TBD
Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.
IMPORTANT INFORMATION
AUCTION DATE:
LOTs start closing on Thursday, October 29th, 10:00 am PDT
LOCATION: Quitman, Texas
PICKUP: TBD
RIGGING:
There is no self-rigging. All Rigging and Loadout will be completed by a contracted and approved Rigger.
INSPECTION DATES: the 27th of October one day only!!!!, 818-495-3038
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
1 Used lot of 38 Drying Tumblers for Soft Gel
Type: SGJ-II
Capacity: 45 Kg
Volts: 480
Kw: 0.75
Speed: 29 r/min
S/N: 15012
Mfg. Date: 14/4/2016
General Information:
The drying process requires an environment with low relative humidity in the air but not hot air. This process is divided into two stages: Tumble drying, and air drying.
These tumblers tumble the softgels around 30 to 40 minutes and remove approximately 25 percent of the water content in the softgel capsules. Then softgel capsules are spread on stackable trays and transferred to the drying room or tunnel where high air flow exists and they stay around 24 to 48 hours or until the softgels become hard enough. This process is called natural manual drying.
Fluid Bed Drying can be used for shape forming and final drying of soft gel capsules. The tumbler quantity can be chosen as the production requirement. Each tumbler can rotate in both directors. The tumbler can be controlled automatically by a PLC system with an encapsulation machine when connected to the master station during the forming process or controlled manually during the pre-drying process. Water content in the gelatin film can be reduced from 45% to 35% during the forming process, and it can be decreased to around 25% in the pre-drying process.
Dry mode: Fluid Bed, the system can blow the capsule to fluidized, which minimizes the friction between the capsules and the inner surface of the tumbler. Increase much effectively of drying.
Sum of lots 5- 18 must exceed the price of lot 4A in order for individual items to sell.
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: Quitman, Texas
Load Out: $10,088.00
Skidding: $TBD
General delivery information available from the auctioneer
Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.
IMPORTANT INFORMATION
AUCTION DATE:
LOTs start closing on Thursday, October 29th, 10:00 am PDT
LOCATION: Quitman, Texas
PICKUP: TBD
RIGGING:
There is no self-rigging. All Rigging and Loadout will be completed by a contracted and approved Rigger.
INSPECTION DATES: the 27th of October one day only!!!!, 818-495-3038
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com