23
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
Accept Cookies Learn MoreLot
23
1 Used Pharmacia Biotech Ultrasonic Bath
Model: MultiTemp 3
General Info:
MultiTemp III regulates temperature by balancing the effects of constant cooling and controlled pulses of heating. Constant cooling is provided by a built-in unit that includes a compressor, an air-cooled liquefied, and an evaporator (a cooling coil as a heat exchanger) located in the chamber. This cooling unit operates at temperatures up to 68.0 °C. Beyond this temperature, the compressor automatically switches off. Heating is provided by pulses of power at a frequency established by the set working temperature. This type of control achieves an optimal balance between cooling and heating and maintains the liquid temperature constant at any pre-set level.
Specs:
Working temperature range: -10 to 90 °C
Temperature control constancy: at 20 °C < ± 0.1 °C
Range of temperature limit switch: 20 to 95 °C
Heater capacity: 230V 800 W 115V 800 W
Cooling capacity: 115 V at 20 °C 240 W at 5 °C 200 W
Cooling capacity: 230 V at 20 °C 265 W at 5 °C 215 W
Compressor coolant: R 134 a
Bath volume: 3 litres
Bath opening/depth: 130x100/100 mm
Pump capacity: pressure, max. 0.32 bar
Pump capacity: flow rate, max. 12 l/min
Noise level at 1 m in front of the unit: <63 dB(A)
Mains requirements: 95 to 132 V/ 60 Hz - 95 to 125 V/ 50 Hz - 198 to 253 V/ 50 Hz
Power consumption: 1,200 W
Ambient operating humidity: 80% at 31 °C; maximum 50%
Relative humidity maximum: at 40 °C
Ambient operating temperature: 4 to 40 °C
Ambient operating pressure: Maximum altitude of 2,000 m Dimensions (H x W x D): 480 x 220 x 420 mm
Weight: 28 kg
Skidding: $250
Load Out: $250
Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.
AUCTION DATE: LOTs start closing on Thursday, November 12th, 10:00 am PT
LOCATION: Santa Fe Springs, CA
PICKUP: TBD
RIGGING:
There is no self-rigging. All Rigging and Loadout will be completed by a contracted and approved Rigger.
INSPECTION DATES: TBD
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
1 Used Pharmacia Biotech Ultrasonic Bath
Model: MultiTemp 3
General Info:
MultiTemp III regulates temperature by balancing the effects of constant cooling and controlled pulses of heating. Constant cooling is provided by a built-in unit that includes a compressor, an air-cooled liquefied, and an evaporator (a cooling coil as a heat exchanger) located in the chamber. This cooling unit operates at temperatures up to 68.0 °C. Beyond this temperature, the compressor automatically switches off. Heating is provided by pulses of power at a frequency established by the set working temperature. This type of control achieves an optimal balance between cooling and heating and maintains the liquid temperature constant at any pre-set level.
Specs:
Working temperature range: -10 to 90 °C
Temperature control constancy: at 20 °C < ± 0.1 °C
Range of temperature limit switch: 20 to 95 °C
Heater capacity: 230V 800 W 115V 800 W
Cooling capacity: 115 V at 20 °C 240 W at 5 °C 200 W
Cooling capacity: 230 V at 20 °C 265 W at 5 °C 215 W
Compressor coolant: R 134 a
Bath volume: 3 litres
Bath opening/depth: 130x100/100 mm
Pump capacity: pressure, max. 0.32 bar
Pump capacity: flow rate, max. 12 l/min
Noise level at 1 m in front of the unit: <63 dB(A)
Mains requirements: 95 to 132 V/ 60 Hz - 95 to 125 V/ 50 Hz - 198 to 253 V/ 50 Hz
Power consumption: 1,200 W
Ambient operating humidity: 80% at 31 °C; maximum 50%
Relative humidity maximum: at 40 °C
Ambient operating temperature: 4 to 40 °C
Ambient operating pressure: Maximum altitude of 2,000 m Dimensions (H x W x D): 480 x 220 x 420 mm
Weight: 28 kg
Skidding: $250
Load Out: $250
General delivery information available from the auctioneer
Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.
AUCTION DATE: LOTs start closing on Thursday, November 12th, 10:00 am PT
LOCATION: Santa Fe Springs, CA
PICKUP: TBD
RIGGING:
There is no self-rigging. All Rigging and Loadout will be completed by a contracted and approved Rigger.
INSPECTION DATES: TBD
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com