1
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
Accept Cookies Learn MoreLot
1
1- Used Vector Collette Granulator MDL GRAL10 Specifications Name: GRAL10 MDL: 10 MFG: 1997 Power Supply: 480 Volts / 60 Hz / 3 Phase. Largest / Full Load: 6A. Construction: Stainless steel product contact surfaces, Capacity: 10-liter non-jacketed bowl, manual bowl lift on base Chopper Power: .75/.55 kw 220 volt General Information Granulators and High Shear mixers are an effective means for turning powders into dense granules for tableting or coating. To create the granules, powders are added to the mixing bowl and the bowl is sealed. If necessary a dry binder may be added with the powders or dispersed into the granulating liquid. A large impeller spins at fairly slow speeds spinning the powders into a vortex. After the powders are blended together, the liquid is added to the product using a pump or pressurized container. A chopper tool located in the bowl spins at fairly high speeds shearing the granules and removing air. The mixing continues until the desired end granule size and density is achieved. The endpoint is often determined via power consumption or torque of the main mixing tool drive. The granulated product may be dried in the mixing bowl if equipped for vacuum drying or discharged for fluid bed drying.
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: Azusa, CA 91702
Load Out: $100.00
Skidding: $400.00
Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.
AUCTION DATE: lots start closing on Thursday, January 174h at 10:00 am PT
LOCATION: Azusa, Calif.
PICKUP: TBD
RIGGING:
There is no self-rigging. All Rigging and Loadout will be completed by a contracted and approved Rigger.
INSPECTION DATES: TBD
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
1- Used Vector Collette Granulator MDL GRAL10 Specifications Name: GRAL10 MDL: 10 MFG: 1997 Power Supply: 480 Volts / 60 Hz / 3 Phase. Largest / Full Load: 6A. Construction: Stainless steel product contact surfaces, Capacity: 10-liter non-jacketed bowl, manual bowl lift on base Chopper Power: .75/.55 kw 220 volt General Information Granulators and High Shear mixers are an effective means for turning powders into dense granules for tableting or coating. To create the granules, powders are added to the mixing bowl and the bowl is sealed. If necessary a dry binder may be added with the powders or dispersed into the granulating liquid. A large impeller spins at fairly slow speeds spinning the powders into a vortex. After the powders are blended together, the liquid is added to the product using a pump or pressurized container. A chopper tool located in the bowl spins at fairly high speeds shearing the granules and removing air. The mixing continues until the desired end granule size and density is achieved. The endpoint is often determined via power consumption or torque of the main mixing tool drive. The granulated product may be dried in the mixing bowl if equipped for vacuum drying or discharged for fluid bed drying.
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: Azusa, CA 91702
Load Out: $100.00
Skidding: $400.00
General delivery information available from the auctioneer
Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.
AUCTION DATE: lots start closing on Thursday, January 174h at 10:00 am PT
LOCATION: Azusa, Calif.
PICKUP: TBD
RIGGING:
There is no self-rigging. All Rigging and Loadout will be completed by a contracted and approved Rigger.
INSPECTION DATES: TBD
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com