55
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
Accept Cookies Learn MoreLot
55
1 Used Lantech Heat Seal Wrapper
Model: SW1000
Dimensions: 72" x 44" x 57"
Belt: 15.5"
Production output rate: Up to 40 packages per minute
Production speed: Up to 90 feet per minute
Minimum product size: 3 length x 1 width x 0.125 height (inches)
Maximum product size: Infinite length x 15 width x 8 height (inches)
Intermittent motion
Cross seal: Hot knife, 18 inch width
Film width range: 6 to 24 inches
Power supply: 230 voltage / 1 phase / 60 hertz / 15 amperage
General Info:
Mechanical scrap rewind, adjustable film inverting head. Film types: most commercial grade polyolefin, PVC, some films may require change-parts. HMI digital read out. Has Mitsubishi Model FX-2NC Controls. Includes Lantech Model ST-700 Shrink Tunnel. Capable of speeds up to 70 feet per minute dependent on package configuration and film. Has four zones. Chamber dimensions: 51" long x 22" wide x 10" high. Has an approximate chamber temperature of 325-350 degrees Fahrenheit. Stainless steel wire belt conveyor
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: Ogden, UT
Skidding $360
Load Out $228
Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.
Ogden Nutra Manufacturing & Packaging Equipment
AUCTION DATE: lots start closing on Tuesday, August 24th at 10:00 am PT
LOCATION: Ogden, Utah
INSPECTION: By appointment only. Please contact us to schedule. 818-495-3038
PICKUP: TBD
RIGGING:
There is no self-rigging. All Rigging and Load out will be completed by a contracted and approved Rigger.
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
1 Used Lantech Heat Seal Wrapper
Model: SW1000
Dimensions: 72" x 44" x 57"
Belt: 15.5"
Production output rate: Up to 40 packages per minute
Production speed: Up to 90 feet per minute
Minimum product size: 3 length x 1 width x 0.125 height (inches)
Maximum product size: Infinite length x 15 width x 8 height (inches)
Intermittent motion
Cross seal: Hot knife, 18 inch width
Film width range: 6 to 24 inches
Power supply: 230 voltage / 1 phase / 60 hertz / 15 amperage
General Info:
Mechanical scrap rewind, adjustable film inverting head. Film types: most commercial grade polyolefin, PVC, some films may require change-parts. HMI digital read out. Has Mitsubishi Model FX-2NC Controls. Includes Lantech Model ST-700 Shrink Tunnel. Capable of speeds up to 70 feet per minute dependent on package configuration and film. Has four zones. Chamber dimensions: 51" long x 22" wide x 10" high. Has an approximate chamber temperature of 325-350 degrees Fahrenheit. Stainless steel wire belt conveyor
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: Ogden, UT
Skidding $360
Load Out $228
General delivery information available from the auctioneer
Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.
Ogden Nutra Manufacturing & Packaging Equipment
AUCTION DATE: lots start closing on Tuesday, August 24th at 10:00 am PT
LOCATION: Ogden, Utah
INSPECTION: By appointment only. Please contact us to schedule. 818-495-3038
PICKUP: TBD
RIGGING:
There is no self-rigging. All Rigging and Load out will be completed by a contracted and approved Rigger.
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com