29
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
Accept Cookies Learn MoreLot
29
1- New LCI Marumerizer QJ-700TG MDL: QJ-700TG P.O. No.: 634110 MFG Date: March 2005 S/N: 4130152 Equipment: Marumerizer General Info The Marumerizer spheronizer from LCI converts wet pellets into spheres of your desired size, ranging from 0.5mm to 10.0mm in diameter. Specs 700 mm diameter friction plate 20 liters nominal batch size batch operation with automatic discharge valve 316 SS GMP design with a high polish finish 304 SS heating/cooling water jacket to prevent the material sticking on the bowl Integrated plate lifting device Limit switches on lid and discharge chute for safety Roll-around machine frame with casters Variable speed drive with 10hp general-purpose motor integrated controls on articulating arm Compressed air under plate Features and Benefits Spheronization improves your product's performance by: Producing a smooth particle surface suitable for thin layer coating Forming granules with a specific bio-consumable shape Conditioning particles to prevent the generation of dust and fines from usage or shipping Increasing flowability by the elimination of sticking or bridging points Increasing the apparent bulk density up to 25% compared to extruded material How It Works The Marumerizer spheronizer is comprised of three main components: a vertical cylinder with the discharge port, a circular "friction" plate, and a variable speed drive train which turns the plate. The feed material to the spheronizer can be extruded particles or moist granules from a mixer/granulator. Since an extruded particle has at least two dimensions already defined, a narrow final particle size distribution is possible. Particles are fed onto the spinning friction plate, which throws them against the inside wall of the cylinder. Extruded particles are quickly broken into segments approximately one diameter long. Centrifugal and gravitational forces create a mechanically fluidized ring of particles. Collisions with the wall, friction plate, and other particles result in the plastic deformation of each granule, quickly creating a spherical shape. The desired shape for a specific application is time and formulation dependent and is achieved, predictably, and repeatedly, in a brief period called the "spheronization time". Website: https://lcicorp.com/en-us/powder-handling-equipment/marumerizer-spheronizer
MJK0221
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: Azusa, CA 91702
Skidding: $ TBD
Load Out: $ 850
Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.
Nutra Processing Packaging Manufacturing Equipment
AUCTION DATE: lots start closing on Tuesday, November 16th at 10:00 am PT
LOCATION: **Note** Assets located at multiple locations.
1310 Mountain View Circle, Azusa, California
INSPECTION: By appointment only. Please contact us to schedule. 818-495-3038
PICKUP: TBD
RIGGING:
There is no self-rigging. All Rigging and Load out will be completed by a contracted and approved Rigger.
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
1- New LCI Marumerizer QJ-700TG MDL: QJ-700TG P.O. No.: 634110 MFG Date: March 2005 S/N: 4130152 Equipment: Marumerizer General Info The Marumerizer spheronizer from LCI converts wet pellets into spheres of your desired size, ranging from 0.5mm to 10.0mm in diameter. Specs 700 mm diameter friction plate 20 liters nominal batch size batch operation with automatic discharge valve 316 SS GMP design with a high polish finish 304 SS heating/cooling water jacket to prevent the material sticking on the bowl Integrated plate lifting device Limit switches on lid and discharge chute for safety Roll-around machine frame with casters Variable speed drive with 10hp general-purpose motor integrated controls on articulating arm Compressed air under plate Features and Benefits Spheronization improves your product's performance by: Producing a smooth particle surface suitable for thin layer coating Forming granules with a specific bio-consumable shape Conditioning particles to prevent the generation of dust and fines from usage or shipping Increasing flowability by the elimination of sticking or bridging points Increasing the apparent bulk density up to 25% compared to extruded material How It Works The Marumerizer spheronizer is comprised of three main components: a vertical cylinder with the discharge port, a circular "friction" plate, and a variable speed drive train which turns the plate. The feed material to the spheronizer can be extruded particles or moist granules from a mixer/granulator. Since an extruded particle has at least two dimensions already defined, a narrow final particle size distribution is possible. Particles are fed onto the spinning friction plate, which throws them against the inside wall of the cylinder. Extruded particles are quickly broken into segments approximately one diameter long. Centrifugal and gravitational forces create a mechanically fluidized ring of particles. Collisions with the wall, friction plate, and other particles result in the plastic deformation of each granule, quickly creating a spherical shape. The desired shape for a specific application is time and formulation dependent and is achieved, predictably, and repeatedly, in a brief period called the "spheronization time". Website: https://lcicorp.com/en-us/powder-handling-equipment/marumerizer-spheronizer
MJK0221
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: Azusa, CA 91702
Skidding: $ TBD
Load Out: $ 850
General delivery information available from the auctioneer
Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.
Nutra Processing Packaging Manufacturing Equipment
AUCTION DATE: lots start closing on Tuesday, November 16th at 10:00 am PT
LOCATION: **Note** Assets located at multiple locations.
1310 Mountain View Circle, Azusa, California
INSPECTION: By appointment only. Please contact us to schedule. 818-495-3038
PICKUP: TBD
RIGGING:
There is no self-rigging. All Rigging and Load out will be completed by a contracted and approved Rigger.
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com