58
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
Accept Cookies Learn MoreLot
58
1 - Used R.A. Jones Orbital Small Cartoner
** Please take into consideration that these items will not be pulled out of production and shipped if purchased until the end of March 2022**
Serial Number: S-5297
Machine Center: 5" LH
Machine Hand: LH
Carton Range:
General Info:
The R.A. Jones OSC is a constant motion horizontal cartoning machine designed for loading products into cartons. The OSC is manufactured to provide an extra margin of strength and reliability and will operate at a maximum speed of 150 cartons per minute.
Operation:
1. A bucket conveyor system transports the product from the transfer to the OSC. As the buckets travel into the OSC, a photoeye detects the product in the bucket. This detection engages the vacuum system to the Orbi-Trak carton feed system. An Orbi-Trak vacuum spindle assembly picks a carton from the carton magazine. The orbi-Trak spindle assembly places the partially opened carton between the leading and trailing transport lugs. The transport lugs complete the carton opening.
2. The open carton moves along the transport parallel to and in synchronization with the bucket. Guides control the top and bottom major flaps and minor flaps of the carton. A flap retarder guide guides the loading-side trailing minor flap along the outside of the bucket wall.
3. The barrel loader, moving in synchronization with the buckets, push the product from the bucket, through the guide buckets, into the carton.
4. The confined holds the product stable in the bucket during loading.
5. The carton enters the gluing station. A flap closer starwheel closes the trailing side flap on the loader side. Guides close the leading side flaps and fold up the lower major flaps. A strip of glue is applied on the lower major flap on the loader and non-loader side and the upper major flaps are folded down by guides.
6. The cartons are removed from the machine by discharge speed belts.
Carton Range:
Min: 1"
Max: 4"
Width:
Min: 0.75"
Max: 3"
Depth: 2.5"
Capabilities: 150 Cartons Per Minute at maximum speed
BULK LOT: Sum of lots 50-72 must exceed the price of lot 49A in order for individual items to sell
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: Torrance, CA
Skidding: $6500
Load Out: $11,050
Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.
**The 2nd Day of this auction is moving to March 31, 2022.**
AUCTION DATE: lots start closing on Thursday, November 4th and
the second day has moved to MArch 31, 2022 .
LOCATION: Torrance, California
INSPECTION: By appointment only. Please contact us to schedule. 818-495-3038
PICKUP: TBD
RIGGING:
There is no self-rigging. All Rigging and Load out will be completed by a contracted and approved Rigger.
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
1 - Used R.A. Jones Orbital Small Cartoner
** Please take into consideration that these items will not be pulled out of production and shipped if purchased until the end of March 2022**
Serial Number: S-5297
Machine Center: 5" LH
Machine Hand: LH
Carton Range:
General Info:
The R.A. Jones OSC is a constant motion horizontal cartoning machine designed for loading products into cartons. The OSC is manufactured to provide an extra margin of strength and reliability and will operate at a maximum speed of 150 cartons per minute.
Operation:
1. A bucket conveyor system transports the product from the transfer to the OSC. As the buckets travel into the OSC, a photoeye detects the product in the bucket. This detection engages the vacuum system to the Orbi-Trak carton feed system. An Orbi-Trak vacuum spindle assembly picks a carton from the carton magazine. The orbi-Trak spindle assembly places the partially opened carton between the leading and trailing transport lugs. The transport lugs complete the carton opening.
2. The open carton moves along the transport parallel to and in synchronization with the bucket. Guides control the top and bottom major flaps and minor flaps of the carton. A flap retarder guide guides the loading-side trailing minor flap along the outside of the bucket wall.
3. The barrel loader, moving in synchronization with the buckets, push the product from the bucket, through the guide buckets, into the carton.
4. The confined holds the product stable in the bucket during loading.
5. The carton enters the gluing station. A flap closer starwheel closes the trailing side flap on the loader side. Guides close the leading side flaps and fold up the lower major flaps. A strip of glue is applied on the lower major flap on the loader and non-loader side and the upper major flaps are folded down by guides.
6. The cartons are removed from the machine by discharge speed belts.
Carton Range:
Min: 1"
Max: 4"
Width:
Min: 0.75"
Max: 3"
Depth: 2.5"
Capabilities: 150 Cartons Per Minute at maximum speed
BULK LOT: Sum of lots 50-72 must exceed the price of lot 49A in order for individual items to sell
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: Torrance, CA
Skidding: $6500
Load Out: $11,050
General delivery information available from the auctioneer
Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.
**The 2nd Day of this auction is moving to March 31, 2022.**
AUCTION DATE: lots start closing on Thursday, November 4th and
the second day has moved to MArch 31, 2022 .
LOCATION: Torrance, California
INSPECTION: By appointment only. Please contact us to schedule. 818-495-3038
PICKUP: TBD
RIGGING:
There is no self-rigging. All Rigging and Load out will be completed by a contracted and approved Rigger.
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com