8
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
Accept Cookies Learn MoreLot
8
1 Used - Wenger Extrusion line for Puff Cereal, Complete line Start to Finish
Wenger Extrusion Cereal line Bulk Lot
9844-10683
BULK LOT: Sum of lots 9-30 must exceed the price of lot 8 in order for individual items to sell
Consists of lots:
9: Wenger Mixer-Alanco Granulator Silo - Wenger Extruder
9a: Wenger TX Magnum Extruder
9b: Conveyor
10: Bucket Elevator LD100-18
11: Wenger Dryer Oven Series IV 4800
12: RBM Bucket Elevator LD100-18
Mixer 3’ x 5’ Ribbon Blender, w torque arm speed reducer and 10 hp motor 230/460 volt, 3 phase, 60hz and 20” x 20” control panel
9844-10684
Pneumatic System Neg lift conveying system, with Filte4r Receiver Mdl 21Avrt style ll w 20 cuft hopper, 68 sqft 16oz DP Bottom removal bags, Magnehelic gauge kit NEMA 4 enclosure
Blower package V2 7 ½ hp Tefc 460/230 v motor vacuum breaker vacuum gauge.
Magnet inline Rare earth magnet per food grade
All tubing, couplings, wiring etc.
9844-10685
Model 7 DDC, Model 4 Feeder, Model 20 Bin, LIW System
30” dia bin, Feeder Screw 7.5” dia x 41” long, Control panel 36” w 81” tall x 11.16 deep, cylinder mdl 7DDC Double Diameter Conditioning Cylinder to Extruder Model TX80
9844-10686
14 x 120” conveyor belt
9844-10687
Extruder Automatic Temperature control system, plumbing components 3 phase, 460V, 1 phase 115 V, Frequency 60, Internl panel voltage 115, starter coil voltage 115, water pressure 60, compressed air 100psig, steam pressure 150psig, gas natural gross heat 1000 btu/ft3. Specific gravity 0.6, Composition 90% CH4 5% C2H6 5%N2
Extruder control position RH Bin Feed Configuration 2A,
Liquid injection
Water 1.8% - 15%
Steam 1.2% - 10%
9844-10688
Series lV Model 4800 Dryer
W Centrifugal Fan, Control Panel 30 x 36 x 10,
98944-10689
Spare parts
9844-10690
Final Parts
9488-10691
Final Parts
Portable Vibratory feeder
Allen Machinery
17952 Lyons Cr
Huntington Beach CA 92647
714 842 8442 Ingredient Application
Coating Drum
Model Number 30-96-DA
Serial number 161908
Dry seasoning Applicator
Model Number 1622-12
Serial Number 72.5/36S
dispenser mounted on Trombone arm and
Slurry Applicator
Model Number 48-4
Serial Number 1620-7
liquid spray system also on mounted on Trombone arm
With supporting blending and heating system with pumps and hmi interface
And Single Tank Mixing system
Model number T1-INS-69G
Serial number 1621-5
By Viatech
Discharge conveyor
Second Dryer
Cooling conveyor
RBM Elevator conveyor
RBM Transfer conveyor with hopper
RBM Transfer conveyor
Woodman Spectra Weigher
Woodman Bagger
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: Torrance, CA
Skidding: $21,450
Load Out: $29,900
Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.
**The 2nd Day of this auction is moving to March 31, 2022.**
AUCTION DATE: lots start closing on Thursday, November 4th and
the second day has moved to MArch 31, 2022 .
LOCATION: Torrance, California
INSPECTION: By appointment only. Please contact us to schedule. 818-495-3038
PICKUP: TBD
RIGGING:
There is no self-rigging. All Rigging and Load out will be completed by a contracted and approved Rigger.
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
1 Used - Wenger Extrusion line for Puff Cereal, Complete line Start to Finish
Wenger Extrusion Cereal line Bulk Lot
9844-10683
BULK LOT: Sum of lots 9-30 must exceed the price of lot 8 in order for individual items to sell
Consists of lots:
9: Wenger Mixer-Alanco Granulator Silo - Wenger Extruder
9a: Wenger TX Magnum Extruder
9b: Conveyor
10: Bucket Elevator LD100-18
11: Wenger Dryer Oven Series IV 4800
12: RBM Bucket Elevator LD100-18
Mixer 3’ x 5’ Ribbon Blender, w torque arm speed reducer and 10 hp motor 230/460 volt, 3 phase, 60hz and 20” x 20” control panel
9844-10684
Pneumatic System Neg lift conveying system, with Filte4r Receiver Mdl 21Avrt style ll w 20 cuft hopper, 68 sqft 16oz DP Bottom removal bags, Magnehelic gauge kit NEMA 4 enclosure
Blower package V2 7 ½ hp Tefc 460/230 v motor vacuum breaker vacuum gauge.
Magnet inline Rare earth magnet per food grade
All tubing, couplings, wiring etc.
9844-10685
Model 7 DDC, Model 4 Feeder, Model 20 Bin, LIW System
30” dia bin, Feeder Screw 7.5” dia x 41” long, Control panel 36” w 81” tall x 11.16 deep, cylinder mdl 7DDC Double Diameter Conditioning Cylinder to Extruder Model TX80
9844-10686
14 x 120” conveyor belt
9844-10687
Extruder Automatic Temperature control system, plumbing components 3 phase, 460V, 1 phase 115 V, Frequency 60, Internl panel voltage 115, starter coil voltage 115, water pressure 60, compressed air 100psig, steam pressure 150psig, gas natural gross heat 1000 btu/ft3. Specific gravity 0.6, Composition 90% CH4 5% C2H6 5%N2
Extruder control position RH Bin Feed Configuration 2A,
Liquid injection
Water 1.8% - 15%
Steam 1.2% - 10%
9844-10688
Series lV Model 4800 Dryer
W Centrifugal Fan, Control Panel 30 x 36 x 10,
98944-10689
Spare parts
9844-10690
Final Parts
9488-10691
Final Parts
Portable Vibratory feeder
Allen Machinery
17952 Lyons Cr
Huntington Beach CA 92647
714 842 8442 Ingredient Application
Coating Drum
Model Number 30-96-DA
Serial number 161908
Dry seasoning Applicator
Model Number 1622-12
Serial Number 72.5/36S
dispenser mounted on Trombone arm and
Slurry Applicator
Model Number 48-4
Serial Number 1620-7
liquid spray system also on mounted on Trombone arm
With supporting blending and heating system with pumps and hmi interface
And Single Tank Mixing system
Model number T1-INS-69G
Serial number 1621-5
By Viatech
Discharge conveyor
Second Dryer
Cooling conveyor
RBM Elevator conveyor
RBM Transfer conveyor with hopper
RBM Transfer conveyor
Woodman Spectra Weigher
Woodman Bagger
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: Torrance, CA
Skidding: $21,450
Load Out: $29,900
General delivery information available from the auctioneer
Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.
**The 2nd Day of this auction is moving to March 31, 2022.**
AUCTION DATE: lots start closing on Thursday, November 4th and
the second day has moved to MArch 31, 2022 .
LOCATION: Torrance, California
INSPECTION: By appointment only. Please contact us to schedule. 818-495-3038
PICKUP: TBD
RIGGING:
There is no self-rigging. All Rigging and Load out will be completed by a contracted and approved Rigger.
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com