4
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
Accept Cookies Learn MoreLot
4
1- Gelatin Bio Reactor
After ingredients are combined, the mixture is placed into a reactor called a Gelatin melter. The reactor surrounded by a thermal jacket heats the mixture while a very high torque turbine mixer stirs it under vacuum. At this stage, approximately 20% of gelatin mixture consists of water.
Bioreactor design is a relatively complex engineering task, which is studied in the discipline of biochemical/bioprocess engineering. Under optimum conditions, the microorganisms or cells are able to perform their desired function with a limited production of impurities. The environmental conditions inside the bioreactor, such as temperature, nutrient concentrations, pH, and dissolved gases (especially oxygen for aerobic fermentation) affect the growth and productivity of the organisms. The temperature of the fermentation medium is maintained by a cooling jacket, coils, or both. Particularly exothermic fermentations may require the use of external heat exchangers. Nutrients may be continuously added to the fermenter, as in a fed-batch system, or maybe charged into the reactor at the beginning of fermentation.
RSQ II Coil Pipe Type Water Heater
Model: RSQ-II
Volume: 300 L
Temp. Control Range: 0-100 Degrees C
Mfg. Date: 2016-03
Product Code: 160308
Hot water volume: 2,000 kgs/h
Power consumption: 18 Kw; 380V; 3 phase
Working temperature: 85-100 ℃
Weight: 350 Kgs
Dimension: External Φ. 700 x H 2,100 mm
Remark: To save energy, the heater can be modified as a steam heating type.
General Info:
The tank is one of the essential auxiliary equipment for water-bath gelatin dissolving unit during the gelatindissolving process. As a essential heating mode during softgel encapsulation process, water-bath helps tokeep the viscosity of the gelatin liquid; yet the viscosity of gelatin liquid could only be stable under constanttemp. at 90-100℃. The tank meets the above requirement by a series of special design: serpentine heating,design ensure recycled use of hot water; outer tank layer is covered by super-fine glass cotton insulationlayer; and the outer cover is sealed with high quality stainless steel. The tank features convenient cleaningand good insulation function and is professional energy-saving heat exchange equipment.
LNG-II Vacuum Condensation Tank
Type: LNG-II
Condensation Area (m2): 60
Vacuum (Mpa): =/< 0.09
Size and Shape (mm): 400x1750
Product Number: 160110
Ex Factory Date: 2016-1-18
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: Fortworth, Texas
Skidding:$TBD
Loadout:$13,000
Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.
AUCTION DATE: Lots start closing 4/16/24 10 am PST
LOCATION: Multiple Locations, Texas
INSPECTION: Please contact us to schedule. 818-495-3038
PICKUP/REMOVAL: Final Loadout is May 9th, 2023.
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
1- Gelatin Bio Reactor
After ingredients are combined, the mixture is placed into a reactor called a Gelatin melter. The reactor surrounded by a thermal jacket heats the mixture while a very high torque turbine mixer stirs it under vacuum. At this stage, approximately 20% of gelatin mixture consists of water.
Bioreactor design is a relatively complex engineering task, which is studied in the discipline of biochemical/bioprocess engineering. Under optimum conditions, the microorganisms or cells are able to perform their desired function with a limited production of impurities. The environmental conditions inside the bioreactor, such as temperature, nutrient concentrations, pH, and dissolved gases (especially oxygen for aerobic fermentation) affect the growth and productivity of the organisms. The temperature of the fermentation medium is maintained by a cooling jacket, coils, or both. Particularly exothermic fermentations may require the use of external heat exchangers. Nutrients may be continuously added to the fermenter, as in a fed-batch system, or maybe charged into the reactor at the beginning of fermentation.
RSQ II Coil Pipe Type Water Heater
Model: RSQ-II
Volume: 300 L
Temp. Control Range: 0-100 Degrees C
Mfg. Date: 2016-03
Product Code: 160308
Hot water volume: 2,000 kgs/h
Power consumption: 18 Kw; 380V; 3 phase
Working temperature: 85-100 ℃
Weight: 350 Kgs
Dimension: External Φ. 700 x H 2,100 mm
Remark: To save energy, the heater can be modified as a steam heating type.
General Info:
The tank is one of the essential auxiliary equipment for water-bath gelatin dissolving unit during the gelatindissolving process. As a essential heating mode during softgel encapsulation process, water-bath helps tokeep the viscosity of the gelatin liquid; yet the viscosity of gelatin liquid could only be stable under constanttemp. at 90-100℃. The tank meets the above requirement by a series of special design: serpentine heating,design ensure recycled use of hot water; outer tank layer is covered by super-fine glass cotton insulationlayer; and the outer cover is sealed with high quality stainless steel. The tank features convenient cleaningand good insulation function and is professional energy-saving heat exchange equipment.
LNG-II Vacuum Condensation Tank
Type: LNG-II
Condensation Area (m2): 60
Vacuum (Mpa): =/< 0.09
Size and Shape (mm): 400x1750
Product Number: 160110
Ex Factory Date: 2016-1-18
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: Fortworth, Texas
Skidding:$TBD
Loadout:$13,000
General delivery information available from the auctioneer
Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.
AUCTION DATE: Lots start closing 4/16/24 10 am PST
LOCATION: Multiple Locations, Texas
INSPECTION: Please contact us to schedule. 818-495-3038
PICKUP/REMOVAL: Final Loadout is May 9th, 2023.
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com