Kurt 8" milling machine vise

TERMS AND CONDITIONS OF ONLINE AUCTION SALE 

License Info: 

Auctioneer: Paul Sebastiano, NCAL 9420

Auction Firm: CLT Auctions, NCAFL 9424 

16.00 % Buyers Premium will be added to all purchases made at this sale 

Auction Closes: October 6, 2020 beginning at 10:00 am 

Inspection: October 5, 2020

12:00 pm – 2:00 pm Virtual Inspection

2:00 pm – 4:00 pm Limited On-site Inspection (face covering required for entry) 

Payment in full is due no later than October 10, 2020

Forms of Payment Accepted: Wire Transfer, Zelle, and Cash; PayPal will be accepted for invoices that are less than $5000. An additional 3% fee will apply to purchases being paid for with PayPal. 

Please email accounting@cltauction.com to request a PayPal invoice.

Cash on pick up is available until Saturday, October 10^th, but will be limited. Please use other accepted forms of payment if possible.

Email Accounting@cltauction.com if you have any questions.  

Removal:  All small items shall be removed no later than October 14, 2020. Pick up deadline is FIRM!

Large items, requiring a third- party rigging service, shall have until October 27^th to remove purchased items.

Buyer is fully responsible for removing all purchased items..

Packaging and shipping for small items is available and provided by:

The UPS Store 

Only Riggers approved by CLT Auctions will be permitted to remove and load equipment requiring the use of Forklifts, Cranes etc. (Insurance is required for approval)

Third party approved rigging company:

James Foreman, Operations Manager

Pedowitz Machinery Movers

3316 US Hwy 301 Wilson NC 27893

252-234-2888 Office

561-234-8758 Cell

James@Pedowitz.com

www.Pedowitz.com 

Flatbed Transport:

Express Transport: 541 842 8100 

CLT Auctions will provide FREE forklift loading for select items, up to 5,000lbs, at this sale. Loading only; shipping preparations and or any dismantling, removing cabinets, or gathering items is the buyers’ responsibility.   Large items over 5,000lbs and/or items needing dismantling or special loading will require a rigger.               

Removal Schedule: No removal on auction day, 10/6/20

Wed 10/7 through Fri 10/9: 9:00am – 5:00pm
Sat 10/10: 10:00am – 4:00pm

Tues 10/13 through Wed 10/14: 9:00am – 5:00pm  

CLT Auctions is a division of Sebastiano Machinery Inc, hereafter known as CLT, CLT Auctions and/or the Auctioneer  

                                All Bidders and other participants attending this sale

Agree that they have read and have full knowledge of these terms and agree to be bound thereby.  All buyers acknowledge and accept with their registration for the auction the terms and conditions of the sale as stated on this page.

         **All Sales are considered Final and sold "AS-IS", "Where-Is" with no warranty or refund**    

INSPECTION: Inspection will be available October 5, 2020. Virtual Inspection 12:00 pm – 2:00 pm; Limited On-site Inspection: 2:00 pm – 4:00 pm.

Buyer hereby acknowledges that Buyer or an agent acting on Buyer's behalf, has inspected, or has had the opportunity to inspect, all of the items upon which Buyer will be bidding and/or does purchase. 

Bidder acknowledges that an auction site is a potentially hazardous place. Flammable, noxious, corrosive and pressurized substances may be present, heavy equipment may be in operation, and electric circuits may be energized.  Every person at the auction site before, during and after  the auction sale, shall be deemed to be there at his/her own risk with notice of the condition of the premises, the activities on the premises, and conduct of third parties; and the bidder shall so advise his/her agents and employees. No person shall have any claim against CLT, its consignors, agents, employees, directors or principals for any injuries sustained or for damages to or loss of personal property, which may occur from any cause whatsoever. 

 BIDDING: Bidding begins to close on Tuesday, October 6, 2020 at 10:00am ET in 30 second intervals. All bidding will be in US Dollars. CLT reserves the right to reject a bid from any Bidder. The highest Bidder as acknowledged by the auctioneer shall be the Purchaser. In the event of any dispute between bidders, or in the event of doubt on the part of CLT as to the validity of any bid, the auctioneer shall have the sole discretion either to determine the successful bidder or to re-offer and resell the lot in dispute. If any dispute arises after the sale, CLT's sales record shall be conclusive in all respects. CLT reserves the right to withdraw any property at any time before actual sale. Unless otherwise announced by the auctioneer at the time of sale, all bids are per lot as numbered in the catalog. On lots upon which there is a reserve, the auctioneer or his assigned agents, shall have the right to bid on behalf of the seller up to and including the reserve amount.

PAYMENT:ALL invoices must be paid in full on or before Saturday, October 10, 2020 in US Dollars by Wire Transfer, Zelle, or Cash.

PayPal will be accepted for invoices that are less than $5000.00. An additional 3% fee will apply to purchases being paid for with PayPal.

Email accounting@cltauction.com if you have any questions.

Your bid is a binding contract. Please do not bid if you are unable to pay for the item. You are responsible for your bids. CLT Auctions/Sebastiano Machinery Inc. reserves the right to refuse any applicant the privilege of bidding and may revoke such privilege at any time. CLT reserves the right to request a deposit during the bid process.

Buyer’s Premium:  16.0% buyer’s premium will apply to all purchases. Buyer’s premium is defined as an additional charge owned by the buyer/bidder above and beyond the highest accepted bid amount.

Deposit:  Anyone outside of the United States will be required to wire transfer a minimum deposit of $5000 US Dollars to be approved for all bidding, NO EXCEPTIONS.  All deposits must be received 48 hours prior to auction end time. CLT Auctions/ Sebastiano Machinery Inc. may require a deposit from US bidders prior to granting permission to bid at this sale. All deposits are fully refundable if no purchase has been made.

TAXES:  Sales tax will be applied to all applicable sales unless purchaser has proper exemption.

Purchasers are responsible for knowing if they qualify to claim exemption from tax in the state that would otherwise be due tax on this sale. The purchaser will be held liable for any tax and interest, and possibly civil and criminal penalties imposed by the member state, if the purchaser is not eligible to claim this exemption.

Purchase of any lot is at the Purchaser’s risk with risk of loss immediately passing to Purchaser upon the

Auctioneer’s call or timed auction end.  Neither CLT, nor its consignors, have any liability of any nature whatsoever to Purchaser if the lot is not delivered to Purchaser due to fire, theft, damage, or any other cause.

All property is sold “AS IS," where is".  Neither CLT Auctions nor the consignor makes any representation or warranty, oral or written expressed or implied, as to the merchantability, fitness for a particular purpose, condition of the property, correctness of the description, condition, capacity, age or any other details used to describe the property.  Absolutely NO RETURN of sold goods, NO REFUNDS, and NO EXCHANGES will be permitted.

Absolutely no warranty or representation, written or oral, is given with any lot.  All statements contained in CLT's catalog/website, marketing material or by the auctioneers, or in any bill of sale, invoice or elsewhere as to description, title, size, quantity, quality, capacity, model, serial number, measurements or condition, are approximated statements and shall not be deemed to be representations or warranties, oral or written, with respect to any lot.  No sale is invalid or made void by reason of any flaw in a lot or by reason of a lot being incorrectly described, and CLT and the consignor will not be liable and no compensation will be paid for any such fault or error of description. Articles purchased may not incorporate approved activating mechanisms, operating safety devices or safety guards, as required by OSHA or otherwise. It is purchaser's responsibility that articles purchased be so equipped and safeguarded to meet OSHA and any other requirements before placing such articles into operation. The auctioneer is acting as agent only and is not responsible for the acts of its principles/consignors. 

REMOVAL / RIGGING: No article shall be removed unless paid in full and all articles purchased shall be removed by October 14, 2020 (5:00pm) ET for small items and October 27^th for items requiring the use of a third-party rigging service. Removal deadline is firm! Unless otherwise arranged with the auctioneer, storage fees will be charged at the rate of $250.00 per day per item not removed by the posted removal deadline. All items remaining onsite after the posted deadline will be relocated. Rigging and relocating costs are the sole responsibly of the purchaser. The purchaser shall be responsible for all costs of removal and shall be liable for any damage, including without limitation, any environmental damage, caused during or as a result of the removal. Purchasers shall comply with all environmental laws and regulations and all requirements established by the auctioneer for the removal of articles, including requirements as to bonding of movers. Purchaser shall fully indemnify CLT Auctions/Sebastiano Machinery Inc and its consignors for any loss arising from damage to any person property or real property caused to any extent by Purchaser’s removal of the lots purchased. Any company or individual, loading any equipment requiring the use of Forklifts, Cranes etc., will be required to carry comprehensive liability insurance written by an insurance carrier of national standing, in an amount of not less than one million dollars ($1,000,000.00) and naming CLT Auctions and or CLT’s consigners as an additional insured. Removal of all items must take place during CLT’s posted hours and dates for removal. The purchaser shall be fully responsible for all costs associated with extended removal hours and/or days.

Shipping and Freight preparation: All shipping preparations and arrangements are the sole responsibility of the purchaser.CLT Auctions does not ship and/or arrange items to be shipped. The purchaser may hire a third- party provider at his/her own risk. CLT Auctions may provide a list of local service providers for the buyer’s convenience. CLT Auctions does not assume any responsibility or liability for all third- party service providers hired or contracted by the purchaser. Purchaser acknowledges that they shall have no rights or remedies against CLT Auctions

 Removal Schedule: No removal on auction day, 10/6/20

Wed 10/7 through Fri 10/9: 9:00am – 5:00pm
Sat 10/10: 10:00am – 4:00pm

Tues 10/13 through Wed 10/14: 9:00am – 5:00pm 

.