1
Osgood Inline Filling Machine Md#8700-S
1/15
Auctioneer has chosen not to publish the price of this lot
Lake City, Pennsylvania
0.00%
15.00%
Description
Osgood Inline Filling Machine for Preformed Cups. Md#8700. S/N 341280. 28,800 Cups Per Hour.
This Model 8700-S simultaneously dispenses, fills, and discharges containers in one quiet, clean and completely automatic process. Containers are stacked by operating personnel into the Cup Magazine. Individual containers are mechanically separated at the Cup Dispenser, and then seated in specially designed Cup Holders. Cup Holders position the containers, by means of an indexing conveyor, for all subsequent phases of the packaging operation. The Tamp Down Station ensures the containers are properly seated in the Cup Holder. When the container reaches the Fill Nozzle Station(s), it is correctly positioned and accurately filled. Weight control adjustments are simplified with the use of HMI (Human Machine Interface) software. This interface ensures that production stops are kept to a minimum. Next, the container reaches the Heat Seal / Roll-stock Station where material is cut to shape, and then sealed to the container by a combination of heat, pressure, and duration of seal. The container reaches the discharge station upon completing the dispensing process where it is ejected from the cup holder and deposited onto the discharge conveyor. Features: Computer controlled programmable PLC and Human Interface (HMI) system. Variable-speed drive. Electronically controlled adjustments for each station assembly. Heavy duty stainless steel construction. CIP *(Clean in Place): 40 gallon per minute flow requirement at 25 psi, 480v, 60amp-Main drive Machine Built in Safety Features: All doors are 72-inch in height, preventing human appendage intrusion into machine moving components. All doors are safety interlocked through the Master Control Relay, using a hard contact for positive shutoff. Easily accessible Safety Emergency Stop Buttons (E-STOP) are provided on the machine. Electrical enclosure has a main disconnect (lockout) which removes all electrical potential from the machine. This machine was last used for infant food products. Machine was built in 2009. Operating manuals, electrical schematics and SOP maintenance procedures are available with machine. Presently set up for 6 oz and 7.5 oz container. Machine speed 60 cycles per minute @ 8 lanes = 28,800 CPH. This machine is set up for heat seal roll stock
Auction Details
Rigging/Removals
T&Cs & Important Info
Ask seller a question
Osgood Inline Filling Machine for Preformed Cups. Md#8700. S/N 341280. 28,800 Cups Per Hour.
This Model 8700-S simultaneously dispenses, fills, and discharges containers in one quiet, clean and completely automatic process. Containers are stacked by operating personnel into the Cup Magazine. Individual containers are mechanically separated at the Cup Dispenser, and then seated in specially designed Cup Holders. Cup Holders position the containers, by means of an indexing conveyor, for all subsequent phases of the packaging operation. The Tamp Down Station ensures the containers are properly seated in the Cup Holder. When the container reaches the Fill Nozzle Station(s), it is correctly positioned and accurately filled. Weight control adjustments are simplified with the use of HMI (Human Machine Interface) software. This interface ensures that production stops are kept to a minimum. Next, the container reaches the Heat Seal / Roll-stock Station where material is cut to shape, and then sealed to the container by a combination of heat, pressure, and duration of seal. The container reaches the discharge station upon completing the dispensing process where it is ejected from the cup holder and deposited onto the discharge conveyor. Features: Computer controlled programmable PLC and Human Interface (HMI) system. Variable-speed drive. Electronically controlled adjustments for each station assembly. Heavy duty stainless steel construction. CIP *(Clean in Place): 40 gallon per minute flow requirement at 25 psi, 480v, 60amp-Main drive Machine Built in Safety Features: All doors are 72-inch in height, preventing human appendage intrusion into machine moving components. All doors are safety interlocked through the Master Control Relay, using a hard contact for positive shutoff. Easily accessible Safety Emergency Stop Buttons (E-STOP) are provided on the machine. Electrical enclosure has a main disconnect (lockout) which removes all electrical potential from the machine. This machine was last used for infant food products. Machine was built in 2009. Operating manuals, electrical schematics and SOP maintenance procedures are available with machine. Presently set up for 6 oz and 7.5 oz container. Machine speed 60 cycles per minute @ 8 lanes = 28,800 CPH. This machine is set up for heat seal roll stock
October Consignment Auction
Ends from
Venue Address
10042 Keystone Drive
Lake City
Pennsylvania
16423
United States
For Equipment Exchange Company of America, Inc. delivery information please telephone 814-774-0888.
Important Information
This is a sale of Consignment goods from both financial instiutions, processors and dealers. Osgood Filling Line was purchased in 2009 for cost of over $1.2 M this unit was last used for filling infant foods. Unit includes set of change parts for additional size tray container (including denester, cup holders, roll stock heat station and cut out parts). Additional set of change parts for round small diameter container ( including denester, cup holders, heat seal pick and place station) parts carts. Upgrade to Gas Flush station for container or tray sizes, Crumb filler- vibrator or pocket filling system, HEPA filtered air system. Significant filling system which will require full truckload for transportation. This unit is located in Lake City for inspection.
Most lots are located in Lake City PA but we do have items located in Hamilton, ON. These are Lots #94 to 120. All items located in Canada will be subject to Custom and brokerage fees in addition to frieight charges. There are lots also located at plant locations so be sure to note location prior to bidding.
All items are offered on an AS IS basis. Charges for loading and skiding are listed with each item. There is also an option for crating at an additional fee on lots located in Lake City, PA. All loading and skidding charges will be added to sucessful bidders auction invoice.
ONCE INVOICES ARE PAID IN FULL RIGGING WILL BE ARRANGED. ALL EQUIPMENT MUST BE REMOVED FROM FACILITES BY NOVEMBER 30, 2017. ANY BUYER NOT REMOVING PROPERTY WITHIN TIMELINE IS IN DEFAULT OF TERMS.
BidSpotter Customer Service Support Department
To reach a member of our qualified support staff regarding information or questions pertaining to the bidding process; please reach us by phone or email.
- Available Monday – Friday, 8:00am – 11:00 PM ET.
- Email: Support@bidspotter.com
- Office: 253-858-6777
- Frequently Asked Questions
Terms and Conditions
TERMS OF SALE
FULL PAYMENT AT TERMINATION OF SALE- VISA - MASTER CHARGE AND DISCOVER ACCEPTED.
BUYER'S FEES: CASH - WIRE TRANSFER 15% BUYERS PREMIUM - CREDIT CARD OR PAYPAL 19% BUYER'S PREMIUM
PAYMENT IN FULL 48 HOURS FROM END OF ON-LINE AUCTION
1. CASHIER’S CHECK OR WIRE TRANSFER 15% & CREDIT CARD OR ONLINE PAYMENT 19% BUYER'S PREMIUM payable to EQUIPMENT EXCHANGE COMPANY will be accepted. By bidding you are accepting the terms of sale and are guaranteeing payment for goods you have purchased.
2. While descriptions are believed to be correct, the auctioneers or the owners make no warranties or guarantees expressed or implied, as to the genuineness, authenticity of, or defect in any lot and will not be held responsible for advertising discrepancies or inaccuracies. Everything sold “AS IS” and “WHERE IS” except as expressly made in writing. No warranties are made as to the merchantability of any items or their fitness for any purpose.
3. It is the buyer’s responsibility to secure all safety equipment to meet all applicable government safety standards in using or removing items purchased.
4. Sales Tax will be added to the purchase of all taxable items. Dealers who purchase for resale must file their resale permit numbers.
5. Purchaser does hereby indemnify and hold harmless auctioneer and seller from any and all damages, claims or liabilities from injuries to persons or property of any type whatsoever caused during the sale or by the removal of items purchased.
6. In the event the purchaser fails to pay the whole of the purchase within the time set forth by the auctioneers and/or fails to comply with any of the conditions or terms of sale, the seller may retain and/or recover the deposit specified as liquidated damages and, in addition thereto, items that are not paid for can be resold at public or private sale without further notice. The defaulting purchaser together with all charges, fees, and expenses incurred by such resale and enforcement of the obligation hereunder shall pay any deficiency resulting from such resale to the auctioneers.
7. Auctioneers and Owner shall have no liability to the purchaser due to non-delivery of any item for any reason. Liability shall be limited to return to the purchaser the monies deposited for non-delivered items.
8. ITEMS MUST BE REMOVED FROM THE PREMISES WITHIN THE REMOVAL TIME STATED ON THE AUCTION NOTICE. No item can, on any account, be removed before termination of the sale. Removal shall be at the expense, risk and liability of the purchaser. Auctioneers shall not be responsible for items not removed within the time allowed. If equipment is NOT REMOVED within specified removal time, purchaser shall be liable for any moving and storage costs incurred and, if not so removed, the ITEMS SHALL BE DEEMED ABANDONED! THIS RULE DOES NOT HAVE ANY EXCEPTIONS!
9. If any dispute arises between two or more bidders, the auctioneers may or may not put the lot up again at once, and resell to the highest bidder.
10. The auctioneer reserves the right to group one or more lots into one or more selling lots, or to add to or delete lots at his sole discretion. The auctioneer reserves the right to reject any bid which is only a fractional advance over the proceeding bid. The auctioneer or the owner may bid for one or more lots, either in their own names or through a representative or an agent to protect their interest.
11. Proxy bids may be submitted to the auctioneer prior to the sale if accompanied by a cashier’s check for 25% of the bid. All proxy bids will be held in confidence.
12. The auctioneer, when acting as agent only, is not responsible for acts of its principals
ALL SALES ARE FINAL AND PAYMENT BY TERMS OF SALE MUST BE COMPLETED WITHIN 48 HOURS OF ON-LINE AUCTION!
