- List
- Grid
-
16 item(s)/page
This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.
12” x 38” Clausing Engine Lathe, 12" swing over bed, 7" swing over cross slide, 38” between centers, 52 – 280 RPM spindle speeds (low range), 360 ...
20” x 120” Lodge & Shipley Engine Lathe, 20" swing over bed, 11" swing over cross slide, 120” between centers, 24 spindle speeds, 9 to 500 RPM, 2-...
21" x 96" Dean, Smith & Grace Engine Lathe, 21” swing over bed, 96” between centers, up to 600 RPM spindle speeds, 4-jaw chuck, chuck guard, tails...
30” x 160” LeBlond Engine Lathe, 30" swing over bed, 20" swing over cross slide, 160” between centers, 16 spindle speeds, 10 to 600 RPM, 2-1/4" sp...
71" x 456" Betts-Bridgeford Heavy Duty Engine Lathe, 71" swing over bed, 48" swing over cross slide, 456” between centers, 6 spindle speeds, inf. ...
108" x 348" Noble & Lund Engine Lathe, 108” swing over bed, 348” between centers, 16 spindle speeds, 0.6 – 36 RPM, 54” center height, variable spe...
Hardinge Turret Lathe
Hardinge Turret Lathe, 13" swing over bed, 12-1/2" spindle to turret face, 8 position horizontal turret, 12” turret slide longitudinal travel, 4-3...
36” Bullard Vertical Turret Lathe, 36" table dia. with 4 jaws, 40" swing (with side head below table), 5 position vertical turret, 4 position side...
4" Giddings & Lewis Horizontal Boring Mill, 4" spindle, No. 45 taper, 30” spindle longitudinal travel, 36 standard range spindle speeds, 10 – 600 ...
9” X 42” Bridgeport Series I Vertical Mill, R-8 spindle taper, 5” spindle travel, 60 – 4200 RPM spindle speeds, 9” x 42” table, 3 T-slots, 300 lb....
Kearney & Trecker Model 205 S-12 Horizontal Mill, 56” x 12” table with 3 T-slots, 24 spindle speeds, 25 – 2000 RPM, 16 feeds, 1/4 to 32 IPM, 28” t...
Kearney & Trecker Model K, No. 3 Plain Horizontal Mill, 64” x 13-1/2” table with 3 T-slots, 24 spindle speeds, 15 – 1500 RPM, 32 feeds, 3/8 to 90 ...
6' 15" Carlton Radial Drill
6' 15" Carlton Radial Drill, drills to center of 144” circle, 6’ arm length, 15” dia. column, 3-3/16” spindle dia., No. 5 Morse spindle taper, 36 ...
2' 6" Toakikai Radial Drill
2' 6" Toakikai Radial Drill, Model TRD600C, 24” spindle center to column face, 6-1/2” column, 6 spindle speeds, 85 – 1440 RPM, 3 feeds, 0.0020, 0....
18" x 36" Landis Heavy Duty Plain Cylindrical Grinder, LCH type, 18” x 36” cap., 69-1/2” bed length, 7-3/8” bed width (2 ways), 30” max dia. grind...
5000 lb. Cap. Balancing Machine, IRD Model B50, 5000 lbs. weight cap., 94” max. dia., 0.16 g. in. max. sensitivity, 0.75” – 13” journal dia. range...
Loading...-
16 item(s)/page