Refine your search
Category
- Machines (202)
- Machine Tools & Tools (72)
- Welders (28)
- Pipes & Fittings (13)
- Measuring & Testing Equipment (11)
- Warehouse Equipment (11)
- Handling & Packaging (9)
- Computers (8)
- Home & Furniture (6)
- Saws (6)
- Sheet Metal Processing (6)
- Electrical Supplies (5)
- Other Industrial Supplies & Equipment (4)
- Compressors (3)
- Grain Handling (2)
- Oilfield Equipment (2)
- Presses (2)
- Analytical Instruments (1)
- Auto Parts & Accessories (1)
- Laboratory Supplies (1)
- Processing (1)
- Restaurant & Bar Equipment (1)
- Surface Treatment Machinery (1)
- Trailers (1)
- List
- Grid
-
397 item(s)/page
This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.
Haas VF-5 CNC Vertical Machining Center, new 1998, 50" X / 26" Y / 25" Z travels, 23" x 52" table, 5000 rpm, 30 hp, CT 50 taper, 710 ipm rapids, 4...
Haas VF-6 CNC Vertical Machining Center, new 1999, 64" X / 32" Y / 30" Z travels, 28" x 64" table, 5000 rpm, 20 hp, vector drive, 31 tool ATC, Mis...
Daewoo Puma 250B CNC Lathe, new 1997, 15.75" max. turning dia., 25.6" max. turning length, 24.4" swing over bed, 17.7" over carriage, 11.1" X trvl...
{ Choice of lots: 4, 5 } Fronius A-4600 Wels Compact Clad Welding Cell, 2750 lbs. max. load, TransTIG 5000 Job, TransTIG 2200 Job, slotted turn t...
{ Choice of lots: 4, 5 } Fronius A-4600 Wels Compact Clad Welding Cell, 2750 lbs. max. load, TransTIG 5000 Job, TransTIG 2200 Job, slotted turn t...
RedRock Model RWPP10-15-20-FM-NE Bolt Adjustable Turning Rolls Drive Unit, 10 metric tons load cap., 4 - 40 ipm rot. speed, 9.3" - 213.3" vessel d...
59" Summit Vertical Turret Lathe, 59" dia. table, 4-jaw independent chuck, 60" under rail, 165 rpm, 40 hp, RH 5 pos. tool turret, LH ram, side hea...
40" x 108" Monarch 32" NN Engine Lathe, new 1954, 40" swing, 108" centers, 16 spindle speeds, 10 - 505 rpm, 4-jaw chuck, tailstock, tool post, ste...
Monarch Engine Lathe
Monarch Engine Lathe, 16 spindle speeds, 9 - 400 rpm, 4-jaw chuck, tailstock, steady rest, chip pan bed, S/N NA, (Asset #4), Location: Jennings, LA
JFMT360 Tool Room Engine Lathe, 8 spindle speeds, 76 - 1250 rpm, threading, 4-jaw chuck, tool post, tailstock, chip pan bed, S/N NA, Location: Jen...
Monarch Model 20" CM Engine Lathe, new 1951, 27.5" swing, 72" centers, 16 spindle speeds, 18 - 800 rpm, 4-jaw chuck, tool post, tailstock chip pan...
34" x 84" VDF Engine Lathe
34" x 84" VDF Engine Lathe, 34" swing over bed, 84" centers, 4-jaw front chuck, 3-jaw rear chuck, 8.5" spindle bore, tool post, tailstock, chip pa...
Gorbel 2 Ton Floor Mount Jib Crane, with a 1 Ton Dayton Hoist, Est. 12’ ft height, Est. 18’ ft, Location: Jennings, LA
Cosen C-520NC Dual Column Horizontal Bandsaw, new 2007, 20.4" max. rnd. cap., 20.4" x 20.4" max. sq. cap., 20.4" x 21.6" max. rect. cap., 10 hp bl...
W.F. Wells Model L-9 Pivot Style Horizontal Band Saw, 9" x 17" rect. at 90 deg., 9" rnd. at 90 deg., 9" x 8" rect. at 45 deg., 8" rnd. at 45 deg.,...
Miller Econotig Welding Power Source, CC, AC/DC,4460 VOLTS, PHASE 1, HZ 60, S/N KK226422, Location: Jennings, LA ...[more]
Sterling Pedestal Mounted Tool Grinder, S/N NA, Location: Jennings, LA
Ohaus Digital Shipping Scale Max Cap. 10,000lbs, Model VX Floor , 48" X 48" X 5", S/N B327524851, Location: Jennings, LA
Haas VF-5 50 XT CNC Vertical Machining Center, new 2001, 23" x 62" table, 60" X / 26" Y / 25" Z travels, 7.9" - 32.9" spindle nose to table, 7500 ...
Haas SL-40T CNC Lathe
Haas SL-40T CNC Lathe, new 2004, 40" swing over bed, 25.5" max. turning dia., 51" max. turning length, 2400 rpm, 55 hp, 17" 3-jaw chuck, 12 pos. t...
Haas EC-1600YZT CNC Horizontal Machining Center, new 2011, 36" x 64" pallet, 64" X / 50" Y / 40" Z travels, 6000 rpm, 30 hp, 30 tool ATC, dual chi...
Haas EC-1600-5DEG CNC Horizontal Machining Center, new 2007, 36" x 64" pallet, 64" X / 50" Y / 32" Z travels, 6000 rpm, 30 hp spindle motor (2-spe...
32900/ Cat 50 Quick Change
32900/ Cat 50 Quick Change, Location: Jennings, LA
Steiner Auto Facer Cat 50 Tool holder, #TBC50506, with Stiner Auto facer Back Spot Facing Tool: #AF-22894, Location: Jennings, LA
{ Choice of lots: 26C, 26D, 26E } Lot of 2: Steiner Technologies Tooling, Steiner Auto Facer Cat 50 Tool holder with Steiner Auto Facer Back Spot...
{ Choice of lots: 26C, 26D, 26E } Lot of 2: Steiner Technologies Tooling, (1) Steiner Autofacer Cat 50 Tool Holder with Steiner Autofacer back fa...
{ Choice of lots: 26C, 26D, 26E } Lot of 2: Steiner Technologies Cat 50 Tooling, (1) Steiner Auto Facer Cat 50 Tool Holder with Steiner Autofacer...
{ Group of lots: 26F, 26G } Lot of 2: Kyocera API-RG2-CV50 Black Oxide Ring Groove Cutter, Location: Jennings, LA
{ Group of lots: 26F, 26G } Lot of 2: Kyocera API-RG1-CV50 Ring Groove Cutter, Location: Jennings, LA
{ Group of lots: 26H, 26I, 26J } Lot of 2: Greenleaf RingMax GRM-Bx155-A50, Location: Jennings, LA
{ Group of lots: 26H, 26I, 26J } Lot of 2: Greenleaf RingMax GRM-Bx152-A50, Location: Jennings, LA
{ Group of lots: 26H, 26I, 26J } Lot of 2: Greenleaf RingMax GRMz-Bx154-A50, Location: Jennings, LA
Lot of 2: Greenleaf RingMax GRM-R44-A50, Brand N/A Cat 50, Location: Jennings, LA
{ Group of lots: 26L, 26M, 26N, 26O, 26P } Lot of 4: Kyocera Api-RG2-CV50 Black Oxide Ring Groove Cutter, Location: Jennings, LA
{ Group of lots: 26L, 26M, 26N, 26O, 26P } Lot of 2: Kyocera Api-RG4-CV50 Black Ring Groove, Cat 50 Sandvik Head, R331.32-305R63KM Width 0.591-0....
{ Group of lots: 26L, 26M, 26N, 26O, 26P } Lot of 3: Kyocera API-GR2-CV50 Black Oxide Ring Groove Cutter, Location: Jennings, LA
{ Group of lots: 26L, 26M, 26N, 26O, 26P } Lot of 3: Kyocera API-GR1-CV50 Black Oxide Ring Groove Cutter, Location: Jennings, LA
{ Group of lots: 26L, 26M, 26N, 26O, 26P } Lot of 3: Kyocera (2) API-RG1-CV50 Ring Groover (1) API-RG1-3000 Ring groover, Location: Jennings, LA
{ Group of lots: 26Q, 26R, 26S, 26T, 26U } Lot of 2: Cat 50 Indicator gauge (1) with Fowler gauge (1) with Blake Gauge, Location: Jennings, LA
{ Group of lots: 26Q, 26R, 26S, 26T, 26U } Cat 50 Quick Change Emuge Head, KSN5/ Z- Weldon 1 1/2" ANSI B9419, Location: Jennings, LA
Lot of 3: Collet Cat 50
{ Group of lots: 26Q, 26R, 26S, 26T, 26U } Lot of 3: Collet Cat 50, Location: Jennings, LA
Lot of 3: Collet Cat 50
{ Group of lots: 26Q, 26R, 26S, 26T, 26U } Lot of 3: Collet Cat 50, Location: Jennings, LA
Lot of 5: Collet Cat 50
{ Group of lots: 26Q, 26R, 26S, 26T, 26U } Lot of 5: Collet Cat 50, Location: Jennings, LA
{ Group of lots: 26V, 26W } Lot of 4: Cat 50 Tooling, (1) Cat 50 with Kaiser Head Size 5.335, (1) Cat 50 with Kaiser Head Size 7.070, (1) Cat 50 ...
{ Group of lots: 26V, 26W } Lot of 3: Cat 50 Tooling with Kaiser Head, (1) Cat 50 with Kaiser Head Size 5.3/5, (1) Cat 50 With Kaiser Head Size N...
{ Group of lots: 26X, 26Y, 26Z, 26ZA, 26ZB } Lot of 2: (1) Cat 50 with Drill Bit (1) Cat 50 with Interchangeable Head, Location: Jennings, LA
Lot of 3: Cat 50 Drill Head
{ Group of lots: 26X, 26Y, 26Z, 26ZA, 26ZB } Lot of 3: Cat 50 Drill Head, Location: Jennings, LA
Lot of 3: Cat 50 Drill Head
{ Group of lots: 26X, 26Y, 26Z, 26ZA, 26ZB } Lot of 3: Cat 50 Drill Head, Location: Jennings, LA
{ Group of lots: 26X, 26Y, 26Z, 26ZA, 26ZB } Lot of 2: Cat 50 with Interchangeable Heads, Location: Jennings, LA
{ Group of lots: 26X, 26Y, 26Z, 26ZA, 26ZB } Lot of 2: (1) Cat 50 Precision components Tool holder (1) Cat 50 with Komet Head, Location: Jennings...
Lot of 3: Cat 50 Face Tool Holder
{ Group of lots: 26ZC, 26ZD, 26ZF } Lot of 3: Cat 50 Face Tool Holder, Location: Jennings, LA
{ Group of lots: 26ZC, 26ZD, 26ZF } Lot of 2: Kaiser Heads Sizes (1) 6.06 (1) 4.06, Location: Jennings, LA
Lot of Interchangeable Heads
Lot of Interchangeable Heads, Location: Jennings, LA
{ Group of lots: 26ZC, 26ZD, 26ZF } Lot of 14: Komet Indexable Insert Drill, Location: Jennings, LA
{ Group of lots: 26ZG, 26ZH, 26ZI, 26ZJ } Lot of 11: Assorted Boring Bars, Largest Size is 27 1/2", Location: Jennings, LA
{ Group of lots: 26ZG, 26ZH, 26ZI, 26ZJ } Lot of 10: Assorted Boring Size, Medium, Largest Size 18 1/2", Location: Jennings, LA
{ Group of lots: 26ZG, 26ZH, 26ZI, 26ZJ } Lot of 10: Assorted Boring Bar Size, Small, Largest Size 10", Location: Jennings, LA
Lot of 9: Indexable Insert Drills
{ Group of lots: 26ZG, 26ZH, 26ZI, 26ZJ } Lot of 9: Indexable Insert Drills, Location: Jennings, LA
Lot of 7: Cat 50 CNC Tooling
{ Group of lots: 26ZK, 26ZL } Lot of 7: Cat 50 CNC Tooling, Location: Jennings, LA
Lot of 7: Cat 50 CNC Tooling
{ Group of lots: 26ZK, 26ZL } Lot of 7: Cat 50 CNC Tooling, Location: Jennings, LA
Loading...-
397 item(s)/page