54
86” x 82’ Centers Meuser Model M-VIII-S CNC Lathe (COMPLETE Rebuilt and Retrofit 2020)
1/187
Auctioneer has chosen not to publish the price of this lot
Houston, Texas
0.00%
18.00%
Description
Meuser Model M-VIII-S CNC Lathe (Retrofit) 86" swing over bed 75” swing over cross slides 1 and 2 82 ft. between centers Head 1 O.D. machining cap.: 10.5" - 70" dia., with designed 8 position vertical turret Head 2 O.D./I.D. machining cap.: 0" - 60" dia. with four position horizontal turret Z1 & Z2 axis full stroke of bed Carriages will pass the tailstock Heavy duty tailstock with 18” diameter quill Spindle speeds: low 6 - 360 rpm Motor: 80/100 hp Head 1 turret (BF-TB320/8) NOT included Head 2 turret (BF-TAN440/4): head 2 attachment: boring bar attachment with 4 position turret disc to replace TAN440/4 on head 2 2 ea. face plates: 47" and 87" (4 jaw blocks for each) Power driven tailstock body & quill with on board clamping Fanuc 32i-TB two paths control (X1-Z1, X2-Z2) with dual control station S/N 32716. MEUSER lathe Rebuild and Retrofit abstract:Headstock test run and confirmed good condition and main spindle is fitted with 80HP Fanuc spindle motor. A direct spindle encoder is prepared to be mounted to the rear of the spindle for feedback.Headstock has four gear ranges with automatic shifting system via the CNCHeadstock lubrication has been installed. Bedways re-ground and saddle (Z1, Z2) mating surfaces inserted, scraped, and fit - including gibs.All fixators have been installed under the machine and it has been laser aligned.The Z drive system is configured with precision rack and pinion mounted the full length of the bed. The new Z1, Z2 drive systems were manufactured with dual rack and pinion drive using the master slave principle to eliminate any backlash in the rack via the servo motors.Two Fanuc servo motors are installed on dual right angle Parker precision planetary gear drives (not yet installed) Cross slide (X1, X2) reground, inserted, scraped, and fit – including gibs.New Ball screw and thrust bearing systems installed for cross slide (X1, X2) axes. Motors mount in the Z axis lower assembly and are to be connected by cogged belt.Fanuc servo motors for X1 and X2 are present (not yet installed). All saddle lube lines have been run and terminated to X/Z1 and X/Z2. The new lubrication pumps are present, not installed.Tailstock has been reworked and both quill and traverse motion and clamp systems have been integrated into the control systems. It has an on-board hydraulic system and tank. A cable reel is present to carry power and communication cables to the unit as it travels along the bed. Three Tool mounting blocks have been designed, documented and fabricated.One to mount an 8 position Barrufaldi BF TB320/8 vertical turret.One to mount a 4 position Barrufaldi horizontal turret.One to mount boring bars which will reach well past centerline. A DQ design 7” x 36” boring bar with an indexing tool plate with four positions is built and present with the machine. The current design of the electrical system is to have the 8 position turret set up on head 1 (nearest the chuck) and the four position turret or boring bars on head 2. The turret control wiring system is designed such that a control cabinet for the turret functions is built and to be mounted in a cabinet that travels with each saddle. In this way only the 200 and 24v have to make the long run from the main cabinet to each head. The back planes for each have been built and the enclosures are present and painted. CNC AND ELECTRICAL:The pendant controls have been designed and the enclosures fabricated. The main CNC control (Fanuc 32i) X 2 are present for each head. The machine is designed to run as a true four path system where the heads can operate the machine together or independently with some obvious safety features and overrides written into the logic. The fanuc operator panel is present with the Fanuc package.The main operator / manual interface is designed and wired. Many of the components, cabling and hardware are already with the machine, but this will need to be assembled at final destination to finalize the CNC system.The machine architecture and cnc control system was designed to accept rear mounted hydraulic steady rests and this has basically been incorporated modularly into the electrical system and PMC logic. This could be used or ignored by the CNC but explains some of the spare components and modules that have not yet been installed in the cabinet as well as the additional space in the same.Much if not all of the pendant arms and mounting hardware is present needs to be installed.Electrical cabinet has been designed, assembled, and set in place.The complete electrical wiring diagram, pmc ladder logic, cable pin diagrams, etc. have been designed and documented.Wire track and cabling has been designed. Cable track purchased and installation started per photos. Cables run from main cabinet at center rear of machine to the front junction box and disburse from there. Major components required to complete machine – AS INTENDED BY DRIL-QUIP:8 Position Barrufaldi model BF TB 320/8, estimated cost. $32,000Fanuc Motor Cables:It was intended that Dril-Quip would purchase the cabling from Igus and make the pin connections themselves. Cost for all cabling was quoted at $15,000- materials only. Igus offers the built cables with pin connections installed for a fee. The third option being to purchase from Fanuc.Chip and coolant control system and piping + any required sheet metal that the final end user may require. See additional documents for more detail and/or contact auctioneer.
Auction Details
Rigging/Removals
T&Cs & Important Info
Ask seller a question
Meuser Model M-VIII-S CNC Lathe (Retrofit) 86" swing over bed 75” swing over cross slides 1 and 2 82 ft. between centers Head 1 O.D. machining cap.: 10.5" - 70" dia., with designed 8 position vertical turret Head 2 O.D./I.D. machining cap.: 0" - 60" dia. with four position horizontal turret Z1 & Z2 axis full stroke of bed Carriages will pass the tailstock Heavy duty tailstock with 18” diameter quill Spindle speeds: low 6 - 360 rpm Motor: 80/100 hp Head 1 turret (BF-TB320/8) NOT included Head 2 turret (BF-TAN440/4): head 2 attachment: boring bar attachment with 4 position turret disc to replace TAN440/4 on head 2 2 ea. face plates: 47" and 87" (4 jaw blocks for each) Power driven tailstock body & quill with on board clamping Fanuc 32i-TB two paths control (X1-Z1, X2-Z2) with dual control station S/N 32716. MEUSER lathe Rebuild and Retrofit abstract:Headstock test run and confirmed good condition and main spindle is fitted with 80HP Fanuc spindle motor. A direct spindle encoder is prepared to be mounted to the rear of the spindle for feedback.Headstock has four gear ranges with automatic shifting system via the CNCHeadstock lubrication has been installed. Bedways re-ground and saddle (Z1, Z2) mating surfaces inserted, scraped, and fit - including gibs.All fixators have been installed under the machine and it has been laser aligned.The Z drive system is configured with precision rack and pinion mounted the full length of the bed. The new Z1, Z2 drive systems were manufactured with dual rack and pinion drive using the master slave principle to eliminate any backlash in the rack via the servo motors.Two Fanuc servo motors are installed on dual right angle Parker precision planetary gear drives (not yet installed) Cross slide (X1, X2) reground, inserted, scraped, and fit – including gibs.New Ball screw and thrust bearing systems installed for cross slide (X1, X2) axes. Motors mount in the Z axis lower assembly and are to be connected by cogged belt.Fanuc servo motors for X1 and X2 are present (not yet installed). All saddle lube lines have been run and terminated to X/Z1 and X/Z2. The new lubrication pumps are present, not installed.Tailstock has been reworked and both quill and traverse motion and clamp systems have been integrated into the control systems. It has an on-board hydraulic system and tank. A cable reel is present to carry power and communication cables to the unit as it travels along the bed. Three Tool mounting blocks have been designed, documented and fabricated.One to mount an 8 position Barrufaldi BF TB320/8 vertical turret.One to mount a 4 position Barrufaldi horizontal turret.One to mount boring bars which will reach well past centerline. A DQ design 7” x 36” boring bar with an indexing tool plate with four positions is built and present with the machine. The current design of the electrical system is to have the 8 position turret set up on head 1 (nearest the chuck) and the four position turret or boring bars on head 2. The turret control wiring system is designed such that a control cabinet for the turret functions is built and to be mounted in a cabinet that travels with each saddle. In this way only the 200 and 24v have to make the long run from the main cabinet to each head. The back planes for each have been built and the enclosures are present and painted. CNC AND ELECTRICAL:The pendant controls have been designed and the enclosures fabricated. The main CNC control (Fanuc 32i) X 2 are present for each head. The machine is designed to run as a true four path system where the heads can operate the machine together or independently with some obvious safety features and overrides written into the logic. The fanuc operator panel is present with the Fanuc package.The main operator / manual interface is designed and wired. Many of the components, cabling and hardware are already with the machine, but this will need to be assembled at final destination to finalize the CNC system.The machine architecture and cnc control system was designed to accept rear mounted hydraulic steady rests and this has basically been incorporated modularly into the electrical system and PMC logic. This could be used or ignored by the CNC but explains some of the spare components and modules that have not yet been installed in the cabinet as well as the additional space in the same.Much if not all of the pendant arms and mounting hardware is present needs to be installed.Electrical cabinet has been designed, assembled, and set in place.The complete electrical wiring diagram, pmc ladder logic, cable pin diagrams, etc. have been designed and documented.Wire track and cabling has been designed. Cable track purchased and installation started per photos. Cables run from main cabinet at center rear of machine to the front junction box and disburse from there. Major components required to complete machine – AS INTENDED BY DRIL-QUIP:8 Position Barrufaldi model BF TB 320/8, estimated cost. $32,000Fanuc Motor Cables:It was intended that Dril-Quip would purchase the cabling from Igus and make the pin connections themselves. Cost for all cabling was quoted at $15,000- materials only. Igus offers the built cables with pin connections installed for a fee. The third option being to purchase from Fanuc.Chip and coolant control system and piping + any required sheet metal that the final end user may require. See additional documents for more detail and/or contact auctioneer.
Surplus CNC and Manufacturing Assets to Ongoing Operations of Dril-Quip, Inc.
Sale Date(s)
Lots: 250
Asset Location:
Dril-Quip, Inc.
6401 Norrth Eldridge Parkway
Building G
Houston, TX 77041
Enter through Truck / Plant Entrance
Directions: Stop at the Guard Gate, proceed to Building G, turn right and watch for the Auction signs.
PLEASE NOTE: THIS IS A WORKING FACILITY AND ALL PERSONS ENTERING THE FACILITY FOR INSPECTION OF MACHINES OR REMOVAL OF ITEMS, INCLUDING HAND CARRIED ITEMS, MUST HAVE PERSONAL PROTECTION EQUIPMENT, INCLUDING STEEL TOE SHOES AND SAFETY GLASSES, NO EXCEPTIONS.
The deadline for removal of ALL items is: FRIDAY, MARCH 24, 2023 (NO EXCEPTIONS).
ALL REMOVALS, HAND CARRIED OR OTHERWISE, MUST BE SCHEDULED BY APPOINTMENT. Removal arrangements MUST BE MADE IN ADVANCE and FIRM APPOINTMENT TIMES FOR REMOVAL WILL BE ASSIGNED. Removal of any and all items is at the expense, risk and liability of the BUYER. Call 713-462-5800 for Removal Appointments.
No item(s) will be allowed to be removed from the site without PROOF OF PAYMENT FOR SAID ITEM(S). NO ITEMS ARE TO BE REMOVED UNTIL THE AUCTION IS COMPLETED. ALL ITEMS NEED TO BE REMOVED NO LATER THAN FRIDAY, MARCH 24, 2023 by 3:00 pm Central Time. ANYONE USING A POWERED VEHICLE OR LIFT OF ANY KIND TO REMOVE ANYTHING FROM THE AUCTION SITE WILL NEED APPROVAL AND A CERTIFICATE OF LIABILITY INSURANCE IN THE AMOUNT OF 1,000,000 USD, NAMING HARRIS AUCTIONS AND SELLER(S) AS ADDITIONALLY INSURED.
Abandonment: If item(s) are not picked up within the published time period set forth in this document, or other arrangements are not agreed upon by both BUYER and SELLER, SELLER reserves the right to restock, resell or otherwise dispose of said item(s) at SELLER’S sole discretion, with no refund to BUYER of any monies received. Additionally, any items abandoned by the BUYER that are required to be removed by the auctioneer will be done so at the BUYER'S expense (NO EXCEPTIONS).
Rigging Companies:
RES Machinery Movers Roy Scroggins
Lisa: 713-408-3309 resmachinery@aol.com
Roy: 713 409-5307
Juan Moreno juanmoreno@jmorinc.com
J Mor Machinery Movers, Inc.
6108 Anglin Dr.
Fort Worth, TX 76119
Direct: 830-241-5451
Cell: 817-456-3124
ABLE MACHINERY MOVERS
Josh Mason Sales Estimator
Cell: (586) 565-1124
MEI Rigging and Crating
Christopher Snowden 713 857-1107
Christopher.Snowden@meillc.com
On-Site Contacts:
Linda 713-469-1811 (linda@harris-auctions.com)
Mike 832-963-0005 (mike@harris-auctions.com)
Please Note: The Auction Company does NOT Load or Ship ANY ITEMS.
For scheduling loadouts, contact Harris Auctions at 713-462-5800.
U.S. CUSTOMS DISCLAIMER: These items are controlled by the U.S. Government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. They may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Important Information
A Buyer’s Premium of 18% will be charged to all purchases
All Bidders are required to register PRIOR to the start of the auction.
Upon notification of being the successful bidder, BUYER will have 48 hours to pay for all purchases in full.
Auction Date: Tuesday, March 7, 2023
Auction Time: 10:00 am Central Time
Inspection Date: Monday, March 6, 2023
Inspection Times: 9:00 am to 3:00 pm Central Time.
For Inspection prior to Official Inspection day, call 713-462-5800 for an appointment.
Asset Location:
Dril-Quip, Inc.
6401 North Eldridge Parkway
Building G
Houston, TX 77041
Enter through Truck / Plant Entrance
Directions: Stop at the Guard Gate, proceed to Building G, turn right and watch for the Auction signs.
PLEASE NOTE: THIS IS A WORKING FACILITY AND ALL PERSONS ENTERING THE FACILITY FOR INSPECTION OF MACHINES OR REMOVAL OF ITEMS, INCLUDING HAND CARRIED ITEMS, MUST HAVE PERSONAL PROTECTION EQUIPMENT, INCLUDING STEEL TOE SHOES AND SAFETY GLASSES, NO EXCEPTIONS.
Removal Deadline: ALL Items: Friday, March 24, 2023 by 3:00 pm Central Time. (No Exceptions). For ALL Removals, hand carried or otherwise, you MUST schedule the loadout of your purchase by scheduling with Harris Auctions at 713-462-5800. A Rigging Company will be onsite to assist in loading.
PRE-AUCTION OFFERS ON MAJOR ASSETS ARE INVITED
FEATURED MACHINES & EQUIPMENT: Mazak, Hwacheon, & Warner & Swasey CNC Lathes, Mazak & Haas CNC Machining Centers, G&L HBM's, Engine Lathes, Saws, Shop Tools, Jib Cranes, and More!
==============================================================
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
- Monday – Thursday, 8:00 AM ET – 10:00 PM ET
- Friday, 8:00 AM ET – 6:30 PM ET
Email: support@bidspotter.com
Terms and Conditions
Terms & Conditions
Surplus CNC and Other Assets to Ongoing Operations of Dril-Quip, Inc.
Auction Date: Tuesday, March 7, 2023
Auction Time: 10:00 am Central Time
Inspection Date: Monday, March 6, 2023
Inspection Times: 9:00 am to 3:00 pm Central Time.
For Inspection prior to Official Inspection day, call 713-462-5800 for an appointment.
PRE-AUCTION OFFERS ON MAJOR ASSETS ARE INVITED
Asset Location:
Dril-Quip, Inc.
6401 North Eldridge Parkway
Building G
Houston, TX 77041
Enter through Truck / Plant Entrance
Directions: Stop at the Guard Gate, proceed to Building G, turn right and watch for the Auction signs.
PLEASE NOTE: THIS IS A WORKING FACILITY AND ALL PERSONS ENTERING THE FACILITY FOR INSPECTION OF MACHINES OR REMOVAL OF ITEMS, INCLUDING HAND CARRIED ITEMS, MUST HAVE PERSONAL PROTECTION EQUIPMENT, INCLUDING STEEL TOE SHOES AND SAFETY GLASSES, NO EXCEPTIONS.
Removal Deadline: ALL Items: Friday, March 24, 2023 by 3:00 pm Central Time. No Exceptions.
For ALL Removals, you MUST schedule the loadout of your purchase by scheduling an appointment. Call 713-462-5800 for appointments. A Rigging Company will be onsite to assist in loading.
Harris Auctions (AUCTIONEER) Terms & Conditions for Live Online Webcast Auction:Surplus CNC and Manufacturing Assets to Ongoing Operations of Dril-Quip, Inc.. SELLER is defined as the legal owner of the assets contained in the auction, note that the AUCTIONEER and the SELLER may at times be the same entity. AUCTIONEER may have a principal interest in this sale. SELLER reserves the right to bid at this auction. BUYER is defined as the winning Bidder of a particular lot or item at the auction.
Buyer’s Premium: A Buyer’s Premium of 18% will be charged to all purchases at this sale.
Registration: All bidders are required to give full name, address, company name, contact information (phone, fax, and email), and bank information when registering for this auction. A credit card (MasterCard / Visa / American Express) is required to be on file when registering for this auction. Note that the AUCTIONEER does not accept credit card payments for any purchases.
Payment: Upon notification of being the successful bidder, BUYER WILL HAVE 48 HOURS TO PAY IN FULL. AUCTIONEER accepts the following payment types:
Wire transfer
Company check
Cashier’s check
NO CREDIT CARD PAYMENTS.
ALL company checks MUST be accompanied by a bank letter of guarantee made out to Harris Auctions. For Company Checks, please HAVE YOUR BANK use this SAMPLE format:
THIS BANK HEREBY GUARANTEES PAYMENT OF CHECKS PAYABLE TO HARRIS AUCTIONS, FROM (NAME OF CUSTOMER) ON ACCOUNT #____ UP TO THE AMOUNT OF ____. THIS LETTER IS VALID FOR PURCHASES MADE AT THE AUCTION OF ____ ON ____(DATE).
Fax all letters to (713) 462-8222 or email to sales@harris-auctions.com
ALL INTERNATIONAL BUYERS MUST PAY BY WIRE TRANSFER. The full purchase price (including Buyer’s Premium, any applicable Loading and/or Rigging charges, taxes, or other applicable fees) on all items to the same buyer must be paid within the time fixed and before removal of any of the goods.
Taxes: Sales Tax of 8.25% will be charged to all purchases at this auction (Hammer Price only, not the Buyer’s Premium) and reflected on the Buyer’s invoice. 8.25% Sales Tax must be paid on the Hammer Price, unless the BUYER can provide a valid and appropriate Texas State Sales Tax Exemption or Resale Certificate, a bill of lading from a common or contract carrier showing delivery to a location outside of Texas, or a bill of lading showing the goods were exported outside of the United States.
Addition to or Withdrawal from Sale: The AUCTIONEER reserves the right to withdraw from sale any of the items, to sell at this auction items not listed, to group one or more lots into one or more selling lots, or to subdivide into two or more selling lots. The AUCTIONEER also reserves the right to sell all of the items listed in bulk.
Absentee Bidding: Absentee bids may be presented to the AUCTIONEER in writing and must be accompanied by 25% of your bid in certified funds with full payment on any winning bids due ONE DAY after notification of your successful bid. Absentee bids are subject to all terms and conditions of the sale as listed herein or announced at the auction sale. All absentee bids are held in confidence.
Dispute Between Bidders: If there is any dispute between two or more bidders, the AUCTIONEER may decide the winning bid for the sale or may resell the item(s) by immediately putting them up for sale again. The decision of the AUCTIONEER shall be final and absolute.
Inspection of Machines: BUYERS are encouraged to make a personal inspection of any and all items they intend to bid on. Bidders may arrange to inspect the machines by calling 713-462-5800 for an Inspection Appointment. INSPECTION OF MACHINES FOR THIS AUCTION IS SET FOR: Monday, March 6, 2023, from 9:00 am to 3:00 pm Central Time. For Inspection prior to Official Inspection day, call 713-462-5800 for an appointment.
Removal: The deadline for removal of ALL items in this auction is: FRIDAY, MARCH 24, 2023 by 3:00 pm Central Time. (NO EXCEPTIONS).
ALL REMOVALS, HAND CARRIED OR OTHERWISE, MUST BE SCHEDULED BY APPOINTMENT. Removal arrangements MUST BE MADE IN ADVANCE and FIRM APPOINTMENT TIMES FOR REMOVAL WILL BE ASSIGNED. Removal of any and all items is at the expense, risk and liability of the BUYER. Call 713-462-5800 for Removal Appointments.
No item(s) will be allowed to be removed from the site without PROOF OF PAYMENT FOR SAID ITEM(S). NO ITEMS ARE TO BE REMOVED UNTIL THE AUCTION IS COMPLETED. ALL ITEMS NEED TO BE REMOVED NO LATER THAN FRIDAY, MARCH 24, 2023 by 3:00 pm Central Time. ANYONE USING A POWERED VEHICLE OR LIFT OF ANY KIND TO REMOVE ANYTHING FROM THE AUCTION SITE WILL NEED APPROVAL AND A CERTIFICATE OF LIABILITY INSURANCE IN THE AMOUNT OF 1,000,000 USD, NAMING HARRIS AUCTIONS AND SELLER(S) AS ADDITIONALLY INSURED.
Transportation: Freight, transportation, and pick-up will be the responsibility of the BUYER. ALL PURCHASED ITEMS MUST BE REMOVED BY THE BUYER NO LATER THAN THE DATE SPECIFIED IN THE ONLINE CATALOG. The BUYER is responsible for arranging all transportation and ensuring the transport vehicle(s) is/are capable of carrying the purchased item(s). A Rigger will be at the facility to load the items. ANY CHARGES FOR RIGGING AND/OR LOADING THAT APPLY TO ANY ITEM(S) WILL BE THE RESPONSIBILITY OF THE BUYER. All Bidders are encouraged to obtain estimated Rigging / Loading charges prior to bidding and before arranging transportation. FOR INFORMATION ON RIGGING / LOADING CHARGES, PLEASE CALL THE RIGGER. THE RIGGER INFORMATION WILL BE PUBLISHED HERE AND IN THE ONLINE CATALOG. In all cases, the cost of the loading / rigging is the responsibility of the BUYER.
Rigging Companies:
RES Machinery Movers Roy Scroggins
Lisa: 713-408-3309 resmachinery@aol.com
Roy: 713 409-5307
Juan Moreno juanmoreno@jmorinc.com
J Mor Machinery Movers, Inc.
6108 Anglin Dr.
Fort Worth, TX 76119
Direct: 830-241-5451
Cell: 817-456-3124
ABLE MACHINERY MOVERS
Josh Mason Sales Estimator
Cell: (586) 565-1124
MEI Rigging and Crating
Christopher Snowden 713 857-1107
Christopher.Snowden@meillc.com
On-Site Contacts:
Linda 713-469-1811 (linda@harris-auctions.com)
Mike 832-963-0005 (mike@harris-auctions.com)
Please Note: The Auction Company does NOT Load or Ship ANY ITEMS.
Abandonment: If item(s) are not picked up within the published time period set forth in this document, or other arrangements are not agreed upon by both BUYER and SELLER, SELLER reserves the right to restock, resell or otherwise dispose of said item(s) at SELLER’S sole discretion, with no refund to BUYER of any monies received. Additionally, any items abandoned by the BUYER that are required to be removed by the auctioneer will be done so at the BUYER'S expense (NO EXCEPTIONS).
Installation: Installation of machines, equipment or any purchased item at any destination location, is NOT INCLUDED, nor provided.
Condition of Items: All items are USED unless otherwise noted in the catalog or conveyed by the AUCTIONEER. The descriptions and images included in the printed or online catalog, printed, online or published brochure, or any other marketing or promotional materials related to the auction, are true and correct to the best of AUCTIONEER’S knowledge at the time of publication. However, AUCTIONEER SHALL NOT BE RESPONSIBLE for any incorrect description, typographical error, omission, or other errors with regards to the printed or online catalog, printed, online or published brochure, or any other marketing or promotional materials. No sale shall be set aside nor allowance made on account of any incorrectness, error in cataloging, or any other error not hereby specified. Pictures are for representation purposes only, all pictures are intended only to show the item or lot to aid the BUYER in evaluating the item or lot. Advertising, promotional, and catalog photos may show tooling and accessories that are not necessarily offered with the machine or equipment. The catalog description of the machine or equipment is final. ALL PROSPECTIVE BIDDERS ARE ENCOURAGED TO INSPECT THE ITEMS AND LOTS PRIOR TO THE AUCTION.
Warranty: All items offered in this auction are offered “As Is”, “Where Is”, “With All Faults”. No warranty, expressed or implied is included with any item offered here. The SELLER expressly disclaims any warranty as to fitness or usability of all items, and the BUYER expressly waives any claim in respect to any possible future use of any item purchased for any purpose whatsoever.
Indemnification: BUYER agrees to indemnify and hold AUCTIONEER and SELLER harmless from and against all claims and liabilities relating to the condition or use of the items purchased or failure of user to follow instructions, warnings or recommendations of the manufacturer, or to comply with federal, state and local laws applicable to such items, including OSHA requirements, or for proximate or consequential damages, costs or legal expenses arising therefrom.
Compliance with Terms of Sale: By becoming the winning bidder, you are now the legal BUYER of that item or items. This is a legally binding contract to purchase said item(s) and you are obligated to complete the transaction by promptly paying for the item(s) in accordance with the instructions set out in this document. In default of payment of bills in full within the time herein specified, the SELLER, in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. Items not paid for or removed within the time set forth in these Terms & Conditions, or separately agreed upon by BUYER and SELLER, may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charges of re-sale, will be charged to the defaulting BUYER.
Additional Terms and Conditions: The auctioneer may add other terms and conditions of sale, such additional terms and conditions to be announced prior to the auction. If you require assistance, please contact Harris Auctions at 713-462-5800, or sales@harris-auctions.com.
U.S. CUSTOMS DISCLAIMER: These items are controlled by the U.S. Government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. They may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
