17
Wysong Model 110-10 110-Ton x 14' Mechanical Press Brake
1/4
Auctioneer has chosen not to publish the price of this lot
Temperance, Michigan
0.00%
18.00%
Description
Wysong Model 110-10 110-Ton x 14' Mechanical Press Brake, Serial Number: PB48-132 ; with 34" Horn Ram Extension, 3" Stroke, 5" Adjustment, 12" Max. Die Height, Flush Floor, Extra Dies, Die Holder, Full Length Ram Clamps, American Style, Dual Ram Mounted Palm Buttons
Auction Details
Rigging/Removals
T&Cs & Important Info
Ask seller a question
Wysong Model 110-10 110-Ton x 14' Mechanical Press Brake, Serial Number: PB48-132 ; with 34" Horn Ram Extension, 3" Stroke, 5" Adjustment, 12" Max. Die Height, Flush Floor, Extra Dies, Die Holder, Full Length Ram Clamps, American Style, Dual Ram Mounted Palm Buttons
Complete Closure of Stamping Plant - Unique Tool & Manufacturing
Ends from
Venue Address
100 Reed Dr
Temperance
Michigan
48182
United States
- Buyers are responsible for removing all of their purchases. Hilco does not provide rigging or shipping services and is not responsible for any rigging or shipping issues.
- Buyers are responsible for removing all purchased lots, including all associated parts, components and accessories, if applicable, from site by removal deadline. Buyers with items left on site after deadline are subject to fines of $500 per day or could be subject to abandonment with no further recourse.
- Removal days for hand carry and smaller items: 21 - 23 October 2020, Monday - Friday, 9:00 AM to 4:30 PM local time
- Removal days for items requiring a rigger: 21 October - 13 November 2020, Monday - Friday, 9:00 to 4:30 PM local time
- Standard Removal Terms apply.
- Anyone performing removal will need to provide proper insurance.
- A buyer release form must be completed and supplied to Hilco personnel if someone other than the registered bidder is picking up auction purchases. They can be turned into Hilco personnel on site or faxed to our office at +1 616.732.7100.
- Prequalified riggers:
MetalForm Services, LLC
P O Box 250
Sterling Hts, MI 48311-0250
Contact: Edward Voss – Sales
edvoss@metalformservices.com
Phone: 586-933-3815
CMF Group USA
1701 East Lincoln Ave.
Madison Heights, MI, 48071
Contact: Sean Parker
Email: sparker@cmfgroupinc.com
Cell: 734-564-8942
Phone: 810-765-2200
Fax: 810-765-2211
- Buyers are responsible for removing all of their purchases. Hilco does not provide rigging or shipping services and is not responsible for any rigging or shipping issues.
- Buyers are responsible for removing all purchased lots, including all associated parts, components and accessories, if applicable, from site by removal deadline. Buyers with items left on site after deadline are subject to fines of $500 per day or could be subject to abandonment with no further recourse.
- Removal days for hand carry and smaller items: 21 - 23 October 2020, Monday - Friday, 9:00 AM to 4:30 PM local time
- Removal days for items requiring a rigger: 21 October - 13 November 2020, Monday - Friday, 9:00 to 4:30 PM local time
- Standard Removal Terms apply.
- Anyone performing removal will need to provide proper insurance.
- A buyer release form must be completed and supplied to Hilco personnel if someone other than the registered bidder is picking up auction purchases. They can be turned into Hilco personnel on site or faxed to our office at +1 616.732.7100.
- Prequalified riggers:
MetalForm Services, LLC
P O Box 250
Sterling Hts, MI 48311-0250
Contact: Edward Voss – Sales
edvoss@metalformservices.com
Phone: 586-933-3815
CMF Group USA
1701 East Lincoln Ave.
Madison Heights, MI, 48071
Contact: Sean Parker
Email: sparker@cmfgroupinc.com
Cell: 734-564-8942
Phone: 810-765-2200
Fax: 810-765-2211
Gorham Industrial, LLC
200 Jasmine LN.
Windsor, SC 29856
Contact: James Gorham
Phone: 803-617-8434
Email: james@gorhamindustrial.com
www.gorhamindustrial.com
Important Information
By Order of the United States Bankruptcy Court Case Number: 19-32356
Transfer & Straight-Side Presses
- 800-Ton Verson #T-SE2-800-181-48 Transfer Press
- 550-Ton Seyi #HSD-H-550-3 Press
OBI/Gap Frame Presses
- (2) 275-Ton Heller Sutherland Mark 2-275 Double Crank
- 220-Ton Seyi-Sutherland Mark-220-W Single Point Gap Frame Press
- 121-Ton Seyi-Sutherland Mark-121 Single Point Gap Frame Press
Coil Equipment
- PA Industries Ultra Advantage SRFX-160 Servo Feed
- Littell 412-5PDL 12" x 0.125" Straightener
- Feed Lease FLCC-4-18 4,000 Lb. x 18" Coil Cradle
Fabricating Equipment
- 110-Ton Wysong Press Brake
- 17-Ton DiAcro 14-482 Press Brake
- Miller Deltaweld 302 Wire Fed Welder
Tool Room Equipment
- Andrychow TUG-40 18" x 80" Engine Lathe
- Enco 12" x 24" Engine Lathe
- Clausing 22-77 Pedestal Drill Press
- KR Wilson 60 Ton H-Frame Press
- Forklifts, Floor Scrubber, Pallet Wrapper, Die Storage Racks, Hand Tools
Sale in partnership with: Branford Group https://www.thebranfordgroup.com
************************
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
- Monday – Thursday, 8:00 AM EST – 10:00 PM EST
- Friday, 8:00 AM EST – 6:30 PM EST
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
************************
Terms and Conditions
- An 18% buyer's premium will be charged on all assets. Onsite cash payments will not be accepted for online only auctions.
- Sales tax will not be charged. View sales tax rules.
- All bidders residing outside of the United States or Canada are required to submit via wire transfer a qualifying deposit of 25% of their total expected purchases. Deposit instructions will be emailed upon registration. Deposit must be received and confirmed prior to start of auction, and can take up to 72 hours to clear. Please register at least 3 business days prior to sale to allow sufficient time to process deposit.
