Refine your search
Primary Category
Category
Brand
- Henschel (8)
- Piovan (4)
- Farrel (3)
- Prodex Henschel (3)
- Buss (2)
- Cumberland (2)
- Farris (2)
- Gala (2)
- LR System (2)
- LR Systems (2)
- Reifenhauser (2)
- Allied (1)
- Arburg (1)
- Brabender (1)
- CDS (1)
- Conair (1)
- Coperion (1)
- Davis Standard (1)
- Dusenbery (1)
- Extrex (1)
- Fcm (1)
- Gatto (1)
- HPM (1)
- Hartig (1)
- Killion (1)
- Leistritz (1)
- Littleford (1)
- Lyle (1)
- MAAG (1)
- Maguire (1)
- Novatec (1)
- PVI (1)
- Papenmeier (1)
- Sencorp (1)
- Uniloy (1)
- Weinig (1)
Item Type
- Extrusion Line (10)
- Laboratory Equipment (7)
- Blender (5)
- Cooling System (5)
- Hopper (4)
- Molder (4)
- Die (3)
- Dryer Hopper (3)
- Sheet Thermoforming Machine (3)
- Single Screw Extruder (3)
- Twin Screw Extruder (3)
- Winder (3)
- Blow Molder (2)
- Control Panel (2)
- Granulator (2)
- Puller Cutter (2)
- Pump (2)
- Sheet Die (2)
- Strand Pelletizer (2)
- Air Knife (1)
- Blower (1)
- Coating Machine (1)
- Cooling Mixer (1)
- Cooling Tank (1)
- Crammer Feeder (1)
- Desiccant Dryer (1)
- Dryer (1)
- Dryer System (1)
- Drying Hopper (1)
- Extruder Gearbox (1)
- Feed Hopper (1)
- Inline Thermoforming Machine (1)
- Knife (1)
- Parts and Accessories (1)
- Platen (1)
- Press (1)
- Pressure Blower (1)
- Pulverizer (1)
- Screen Changer (1)
- Sheet Extrusion Line (1)
- Slitter (1)
- Slitter Unit (1)
- Slitting Machine (1)
- Trim Press (1)
- Vacuum Sizing Tank (1)
- Vertical Trim Press (1)
- Water Bath (1)
State/Province
Town/City
- List
- Grid
-
72 item(s)/page
This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.
For any buyers residing outside the United States or Canada, a $2,000.00 wire transfer deposit may be required for approval to participate in our...
YOU WILL RECEIVE AN INVOICE ONCE THE SALE HAS CONCLUDED. PAYMENT IS DUE NO LATER THAN DECEMBER 19TH.
Payment is due no later than December 19th. You will receive an invoice from info@integra-as.com once the sale has concluded. If it is a multi-da...
December 19 - January 17, 2025, Monday - Friday, 8:00 AM to 4:00 PM local time. The facility will be closed from 12/24 through 1/1 and back on 1/...
LCI ES 56/56 15 HP Gear Pump. (Basic Loading Fee $100)
40 HP Maag EX110-5BP Extrex Melt Pump. No controls included. (Basic Loading Fee $100)
Lufkin Gearbox
Lufkin D440C Gearbox with 800 HP Service Rating 17.42/1 reduction, 982 hp cat. rating, 1.2 service factor. (Basic Loading Fee $200)
19"" Wide Godet Stand
9.5"" dia. x 19"" long 7-Roll Godet Stand. (Basic Loading Fee $100)
Weinig Unimat 300U 5-Cutter Head Wood Working Molder. Includes operator controls. (Basic Loading Fee $300 On Skid)
21 HP Piovan Pneumatic Material Blower. (Basic Loading Fee $200)
6,000 LB Stainless Steel Piovan Dryer Hopper 56" dia. X 172" straight side and 42" cone with 6" outlet. (Basic Loading Fee $200)
1,000 LB Stainless Steel Piovan Dryer Hopper 40" dia. X 84" straight side and 22" cone with 6" outlet. (Basic Loading Fee $100)
3,000 LB Stainless Steel Piovan Dryer Hopper 54" dia. X 122" straight side and 37" cone with 6" outlet. (Basic Loading Fee $200)
Nooter Corp. 226 Cubic Foot Aluminum Drying Hopper Dimensions: 60" dia. x 126" straight side with 36" cone Flat top with (2) large openings, 6" d...
4" 9/1 Buss GS140 Kneader with 5.5" o.d. Hot Feed Extruder. Includes crammer feeder, Gala #6 pelletizer and spin dryer. Jacketed barrels with ho...
4" Farrel Continuous Mixer with Gala #5 Underwater Pelletizer Mixer. Has jacketed chamber. Includes spare rebuilt chamber & rotors, new mixer gea...
12"" Dia. Readco Twin Screw Continuous Processor. 96"" long jacket. Last used with 40 hp motor. No motor or controls included. (Basic Loading Fe...
100mm Davis Standard 100MM35F Non-vented Extruder. 30:1 L/D ratio, Non-vented, electrically heated, water cooled barrel, No temperature control p...
4.5" HPM TMIII Single Screw Extruder. 30:1 L/D ratio, vented (plugged), electrically heated, water cooled barrel. Includes 250 hp DC motor and mo...
8" Buss MDS200-4 Hot Melt Single Screw Extruder. 6:1 L/D ratio, jacketed, oil heated, oil cooled barrel. Driven by 100 hp DC motor. Includes motor...
1.5"" Killion KL-150 Single Screw Extruder with 24:1 L/D ratio barrel. (Basic Loading Fee $400 skidded)
Farrel #9FCM Continuous Mixer, Driven by 500 hp DC motor. Includes SCR and isolation transformer. Includes #15 style rotors, operator control pane...
Randcastle Lab Sheet Extrusion Line Line. Includes a .75" extruder, an 8" wide x 2" OD chill roll stack, sheet die, pull rolls and single positio...
100mm Leistritz ZSE100 GLAAX Co-Rotating Twin Screw Extruder. Year: 2002. 44:1 L/D ratio barrel with side feeder, temperature control panel, stra...
5"" Gneub KSF23A 130R Continuous Screen Changer. (6) 5"" breaker plated installed on a circular steel plate. (Basic Loading Fee $200)
14' Long Conair ST107-16-2 Stainless Steel Cooling Tank. 12" x 12" cross section, 14' long. (Basic Loading Fee $100)
12"" wide x 12"" deep x 48"" long stainless steel water bath. (Basic Loading Fee $100)
10' Long Gatto Vaccum Sizing Tank. 16" x 18" cross section with a 10" dia. opening, with fiberglass lids and (4) inspection windows. (Basic Loadi...
2" Dia. Farrel CP2 FCM Continuous Mixer with 3.5" Hot Feed. Equipped with #15 style rotors, includes operator controls and drive. (Basic Loading ...
4.5" x 22" Farris Solid Belt Puller. Has multi speed gearbox, variable speed transmission with manually adjusted belts. (Basic Loading Fee $200 ...
4.5"" Wide x 22"" Farris Solid Belt Puller. Rated at 2.5 - 44.5 feet per minute Has multi speed gearbox with variable speed transmission and manu...
6"" Cumberland Pelletizer
6" Cumberland Strand Pelletizer. Equipped with 12 knife bolt-on style rotor. Driven by 3 hp 230/460 volt US Varidrive, spring loaded pull rolls. ...
6"" Cumberland Pelletizer
6" Cumberland Strand Pelletizer. Equipped with 8 knife rotor but only 6 bolt on style blades installed. Driven by a 7.5HP USVD, no feed tray incl...
Brabender PLX302 Plasticorder. Includes 1.25"" Extruder with 25:1 L/D and (4) mix heads. (Basic Loading Fee $100)
30mm W&P Coperion ZSK30 Co-Rotating Twin Screw Extruder. 35:1 L/D ratio, electrically heated, water cooled barrel. Includes operator control and ...
92"" Macro ME9-2 Slitter/Pull Roll Station. Previously used inline and has HMI pendent control. (Basic Loading Fee $250)
Used 72"" Dusenbery 815 Duplex score cut Slitter-Rewinder. 25 HP DC & 15 HP DC dual drive system with score slitting assembly Duplex differential...
2.25"" CDS CSFK 2.50-L Dual Lane Fly Knife Cutter. Includes individual controls for each station. (Basic Loading Fee $300 skidded)
72"" Flex Lip Sheet Die
72"" Wide Allied AHM100 ""DuroFlow"" Flex Lip Sheet Die. 0-0.100 gap opening with 1.73"" x 4"" back center inlet. (Basic Loading Fee $100)
35 Cubic Foot Stainless Steel Double Cone Blender. Includes motor and stand supplying 53"" discharge height. (Basic Loading Fee $200)
30 Cubic Foot Stainless V-Blender Includes intensifier bar. (Basic Loading Fee $200)
40 Cubic Foot Aaron Stainless Steel Jacketed Ribbon Blender. Dimensions: 30"" wide x 78"" long Dimple jacket with center bottom outlet supplying ...
Maguire 3-Component Blender
Maguire WSB-100 3-Component Blender. Capacity: estimated 350-450 lb/hr. (Basic Loading Fee $300)
20 Liter Papenmeier TGHK20 Stainless Steel Lab High Intensity Mixer. Jacketed stainless steel bowl. (Basic Loading Fee $100)
200 Liter Henschel FM200 Stainless Steel High Intensity Mixer. Jacketed mixer with 3-tier blade design, with 50/25 hp dual speed motor and motor ...
10 Liter Henschel FM10 High Intensity Mixer. Pneumatic actuated discharge valve, with 3-tier blades. Mounted on casters and unitized base and dig...
20"" x 50"" Cumberland 5018H ""Hog"" Granulator. (18) blades staggered on solid rotor. Driven by a 200 hp motor with blower and tray feed hopper....
18" x 28" LR Systems SG500/BD-18 Granulator. 18" x 28" feed throat with 2-knife open rotor, driven by a 30 hp motor .(Basic Loading Fee $100)
Wedco SE12-TC Dual Mill Pulverizer. Includes operator controls, (2) 25HP motors, classifier screen and cyclone feeder. (Basic Loading Fee $300)
50 Cubic Foot Scott MF484 Steel Blender/Feeder/Lump Breaker. Chamber dimensions: 48" dia. X 72" long Paddle blending with 7" screw conveyor discha...
4,200 Liter Purnell HKM4200 Stainless Steel Jacketed Mixer/Cooler. Jacket certified by American Block Co. for 60 psi @ 350°F, clam shell lid, driv...
600 Liter Henschel HKM600 Stainless Steel Cooler. Stainless steel contact parts with clam shell lid and paddle blending with plough blades. Includ...
1,200 Liter Littleford Stainless Steel Cooler. Stainless steel jacketed bowl, driven by a 30 hp motor, 460 volt. (Basic Loading Fee $200)
600 Liter Henschel Stainless Steel Mixer. Mixer has no valve, no controls and blades. Includes an 82/94 kw dual speed motor. (Basic Loading Fee $2...
500 Liter Henschel Stainless Steel High-Intensity Mixer. Includes two-tier blades and an 82/94 kw dual speed motor No valve or controls included....
1,050 Liter Prodex/Henschel Cooler. Includes air actuated discharge valve Bowl jacket requires repair. (Basic Loading Fee $200)
1,050 Liter Prodex/Henschel 115CM Cooler, Air actuated discharge, motor and gearbox. (Basic Loading Fee $200)
1,050 Liter Prodex/Henschel 115CM Cooler. Air actuated discharge, motor and gearbox. (Basic Loading Fee $200)
16" x 16" LR Systems SG400 Granulator. 16" x 16" throat opening with over-sized hopper, driven by approximately 25 hp motor. (Basic Loading Fee $2...
Unused 54" Black Clawson Extrusion Coating Line Station Station. Consists of a primary casting roll (not installed) approximately 36" O.D. X 54" ...
Novatec CDM-750 Desiccant Dryer. (Basic Loading Fee $400 skidded)
Loading...-
72 item(s)/page