Mark 2000SIIP X-Ray Machine, S/N 190209 (2019), Chamber Size: 23" x 23" x 48", w/ HP Imaging Monitor, Asus PC, 115V/15A

Keyence XM-1200/XM-T1200 Handheld Probe CMM Probe, S/N CD8007377 (2018), 12" x 18" Table, Keyence Controls, Built-In Monitor, Hard Case

Leco 825-300-100 Spectrum System 1000 Variable Speed Polisher, S/N 17556 (2017), 115V/10A

2,000-Lb Capacity Hydraulic Dumper, 40" x 36" Platform, 3902 Hours, w/ Pendant Control

2,000-Lb Capacity Hydraulic Dumper, 40" x 36" Platform, 8683-Hours

Electrical Control Cabinet, w/ Allen Bradley PanelView PLC, 480V

CLM Vibe Tech Vibratory Finishing Machine, S/N NA, 65" Diameter Bowl, 15-HP Motor, Bowl Cover w/ Powered Lift

Approximately (45) Bags of Rosler RX 40/20 Ceramic Media

CLM Vibe Tech Vibratory Finishing Machine, S/N NA, 65" Diameter Bowl, 15-HP Motor, Bowl Cover w/ Powered Lift

CLM Vibe Tech VTPW24BOD Parts Washer, S/N 8116M727, 10"L x 24"W, Chain Belt

CLM Vibe Tech VTMH 60SS Shaker Conveyor, 60"L x 24"W with CLM 48" x 24" Shaker Conveyor

Walther Trowal ZM 03 Centrifuge, S/N 168832 (2015), 24" x 24" x 24"H Locking Tank, 5648-Hours

Rosler RDGE 600-L Wire Mesh Belt Blast Machine, S/N 84053 (2018), Belt Width: 600mm, Max Workpiece Height: 250mm

Donaldson Torit 4-Cartridge Dust Collector, w/ Delta P-Plus Control, Kidde Fire Suppression and Smoke Detector, Donaldson 8AN Air Valve

Dynarad MT 600 Electric Heated Silicon Carbide Tilting Crucible Type Aluminum Melting & Holding Furnace, S/N F1527 (2016), Melting Rate: 600-Lbs/H...

Striko Westofen Model DC2-F DGAS Furnace, S/N F12985 (New 2016), on Casters

Meltec MS-ADVU Electric Dosing Heater

Striko Westofen Model MHS 1000/750 G-eg Stationary Tower/Shaft Type Aluminum Melting & Holding Furnace, S/N PB170273 (2018). Melt Capacity (Alumin...

Furnace Ladle 30" Diameter x 24" Deep

Frech DAK 450-54 RC 509-Metric Ton (561-US Ton) Horizontal Cold Chamber High-Pressure Aluminum Die Casting Machine, (New 2016), Locking Force: 561...

Robamat Thermocast 2201 Mold Heater, S/N 20205 (2016)

Tecnopres KZP30 30-Ton Automated 4-Post Hydraulic Trim Press, Distance Between Columns: 37.4" x 37.4", Daylight: 35.4" x 70.9", Stroke (Adjustable...

Tecnopres KZP30 30-Ton Automated 4-Post Hydraulic Trim Press, Distance Between Columns: 37.4" x 37.4", Daylight: 35.4" x 70.9", Stroke (Adjustable...

Frech DAK 640-62 RC 652-Metric Ton (718-US Ton) Horizontal Cold Chamber High-Pressure Aluminum Die Casting Machine, S/N K640K0064423 (New 2016), L...

Robamat Thermocast 5212 Mold Heater, S/N 23061 (2021)

Robamat Thermocast 2201 Mold Heater, S/N 20587 (2017)

Frech DAK 640-62 RC 652-Metric Ton (718-US Ton) Horizontal Cold Chamber High-Pressure Aluminum Die Casting Machine, S/N K640K0064223 (New 2016), L...

Robamat Thermocast 5212 Mold Heater, S/N 22134 (2019)

Robamat Thermocast 2201 Mold Heater, S/N 20210 (2016)

Tecnopres KZP30 30-Ton Automated 4-Post Hydraulic Trim Press, Distance Between Columns: 37.4" x 37.4", Daylight: 35.4" x 70.9", Stroke (Adjustable...

Tecnopres KZP30 30-Ton Automated 4-Post Hydraulic Trim Press, Distance Between Columns: 37.4" x 37.4", Daylight: 35.4" x 70.9", Stroke (Adjustable...

Frech DAK 640-62 RC 652-Metric Ton (718-US Ton) Horizontal Cold Chamber High-Pressure Aluminum Die Casting Machine, S/N K640K0064523 (New 2016), L...

Robamat Thermocast 5212 Mold Heater, S/N 22019 (2019)

Frech DAK 830-71 RC 846-Metric Ton (932-US Ton) Horizontal Cold Chamber High-Pressure Aluminum Die Casting Machine, S/N K830K83222 (New 2017), Loc...

Robamat Thermocast 5212 Mold Heater, S/N 21137 (2018)

Robamat Thermocast 2201 Mold Heater, S/N 20586 (2017)

Tecnopres KZP40 40-Ton Automated 4-Post Hydraulic Trim Press, S/N 4429, Distance Between Columns: 37.4" x 37.4", Daylight: 35.4" x 70.9", Stroke (...

Tecnopres KZP40 40-Ton Automated 4-Post Hydraulic Trim Press, S/N 4426, Distance Between Columns: 37.4" x 37.4", Daylight: 35.4" x 70.9", Stroke (...

Frech DAK 830-71 RC 846-Metric Ton (932-US Ton) Horizontal Cold Chamber High-Pressure Aluminum Die Casting Machine, S/N K830K83222 (New 2017), Loc...

Robamat Thermocast 5212 Mold Heater, S/N 22133 (2019)

Robamat Thermocast 2201 Mold Heater, S/N 20203 (2016)

AMH Model 14529 CNC Vertical Mill (New 2016)