Surplus Equipment Sale from the ongoing operations of California Food Processing Facility
You’re currently pending approval by the auctioneer. In the meantime you can continue to place bids from the lot page which will be accepted once you’re approved.
196 item(s)
  • List
  • Grid
  • 196 item(s)
    /page

This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.

Wash station, 9' x 21" stainless steel, with hand wash & meat wash sinks. Rigging and removal cost: $350. For rigging and removal, please contact ...

Rail scale, Avery Weigh Tronics, Mdl. 1310, SN: MONC1, 4' beam. Rigging and removal cost: $75. For rigging and removal, please contact Mark at Gol...

Rail scale, Avery Weigh Tronix, SN: Mono #2. Rigging and removal cost: $75. For rigging and removal, please contact Mark at Golden Bear Services 9...

Wash station with hose. Rigging and removal cost: $150. For rigging and removal, please contact Mark at Golden Bear Services 951-519-9672, markg@g...

Chad Carcass washer, 12' long x 24" wide pass through, with control panel and exhaust duct Rigging and removal cost: $TBD. For rigging and removal...

Chandler 3 fan evaporator, Mdl. HHF650SA, 6.2 tons, 3/4hp motors, R-22. Rigging and removal cost: $500. For rigging and removal, please contact Ma...

Bohn 3 fan evaporator, Mdl. MPE3002F, 3.75 tons, 1/4 hp motor, R-22, Rigging and removal cost: $500. For rigging and removal, please contact Mark ...

Chandler 3 fan evaporator, Mdl. HHF650SA, 6.2 tons, 3/4hp motors, R-22. Rigging and removal cost: $500. For rigging and removal, please contact Ma...

Chandler 3 fan evaporator, Mdl. HHF650SA, 6.2 tons, 3/4hp motors, R-22. Rigging and removal cost: $500. For rigging and removal, please contact Ma...

Chandler 3 fan evaporator, Mdl. HHF650SA, 6.2 tons, 3/4hp motors, R-22. Rigging and removal cost: $500. For rigging and removal, please contact Ma...

Chandler 3 fan evaporator, Mdl. HHF650SA, 6.2 tons, 3/4hp motors, R-22. Rigging and removal cost: $500. For rigging and removal, please contact Ma...

Lot 18B

Control Panel

Boning table control panel, stainless steel enclosure. Rigging and removal cost: $125. For rigging and removal, please contact Mark at Golden Bear...

Meat wash station, 5' X 27", with knife sterilizer Rigging and removal cost: $250. For rigging and removal, please contact Mark at Golden Bear Ser...

Lot 21

Handwash Sink

Hand Wash Sink, wall mounted with knee peddle. Rigging and removal cost: $150. For rigging and removal, please contact Mark at Golden Bear Service...

10 hook Knife rack, 5' wide, stainless steel. Rigging and removal cost: $75. For rigging and removal, please contact Mark at Golden Bear Services ...

Printer station, Datama Oneil, Mdl.I-Class Mark II, SN: 51153144, with cart. Rigging and removal cost: $75. For rigging and removal, please contac...

Printer station, Zebra Mdl. Gk420d printer, Formans wall mount desk and cart. Rigging and removal cost: $150. For rigging and removal, please cont...

Lot 25

Wash Station

Wash station, stainless steel, wall mounted Rigging and removal cost: $200. For rigging and removal, please contact Mark at Golden Bear Services 9...

Lot 26

Wash Station

Wash station, stainless steel, wall mounted Rigging and removal cost: $200. For rigging and removal, please contact Mark at Golden Bear Services 9...

19 hook knife rack, 10' wide, stainless steel. Rigging and removal cost: $150. For rigging and removal, please contact Mark at Golden Bear Service...

18 hook knife rack, 10' wide, stainless steel. Rigging and removal cost: $150. For rigging and removal, please contact Mark at Golden Bear Service...

Wash station, 6' x 21", stainless steel, 3 compartments with hand, meat wash & knife sterilizer. Rigging and removal cost: $250. For rigging and r...

Meat wash sink, 6' x 22", stainless steel, 2 compartments with hand and knife sterilizer stations. Rigging and removal cost: $250. For rigging and...

"L" Shape Knife holding rack, stainless steel, 143” overall length Rigging and removal cost: $300. For rigging and removal, please contact Mark at...

Century 3 fan evaporator, Mdl. A432-507A, 5 tons, 1/4hp motors, R-22. Rigging and removal cost: $500. For rigging and removal, please contact Mark...

Century 2 fan evaporator, Mdl. A442-338A, 3.4 tons, 1/4 hp motors. Rigging and removal cost: $500. For rigging and removal, please contact Mark at...

Century 2 fan evaporator, Mdl. A442-338A, 3.4 tons, 1/4 hp motors. Rigging and removal cost: $500. For rigging and removal, please contact Mark at...

Century 3 fan evaporator, Mdl. A432-507A, 5 tons, 1/4hp motors, R-22. Rigging and removal cost: $500. For rigging and removal, please contact Mark...

Century 4 fan evaporator, Mdl. HHF710SPA, 6.8 tons, 3/4hp motors, R-22. Rigging and removal cost: $600. For rigging and removal, please contact Ma...

Century 4 fan evaporator, Mdl. HHF710SPA, 6.8 tons, 3/4hp motors, R-22. Rigging and removal cost: $600. For rigging and removal, please contact Ma...

Century 4 fan evaporator, Mdl. HHF710DPA, 6.8 tons, 3/4hp motors, R-22. Rigging and removal cost: $600. For rigging and removal, please contact Ma...

Century 4 fan evaporator, Mdl. HHF710DPA, 6.8 tons, 3/4hp motors, R-22. Rigging and removal cost: $600. For rigging and removal, please contact Ma...

Edey Mfg. Electric sliding door, approximately 75" x 98" tall, stainless steel. Rigging and removal cost: $700. For rigging and removal, please co...

Edey Mfg. Electric sliding door, approximately 75" x 98" tall, stainless steel. Rigging and removal cost: $700. For rigging and removal, please co...

Wash station, stainless steel, with hose, wall mounted Rigging and removal cost: $150. For rigging and removal, please contact Mark at Golden Bear...

FPEC Vat Dumper, lift & pivot, stainless steel construction, 11.5' pivot point, FPEC hydraulic power pack. Rigging and removal cost: $1500. For ri...

Weiler Mdl. 1109 SFG Grinder, SN:84153, with FP1000 auger puller, auger puller sn: 84207. Rigging and removal cost: $1650. For rigging and removal...

Incline Transfer Conveyor, stainless steel construction, 20' x 24” wide plastic belt, 16" infeed x 12' discharge with single pneumatic diverted. R...

Lot 46

Control Panel

Operator control panel for Grind equipment, stailness steel Rigging and removal cost: $250. For rigging and removal, please contact Mark at Golden...

Transfer Conveyor, 12' long x 18" wide plastic belt, on casters Rigging and removal cost: $150. For rigging and removal, please contact Mark at Go...

Operator work platform, two stairs, stainless steel, 24” height. Rigging and removal cost: $75. For rigging and removal, please contact Mark at Go...

Weiler, Mdl. 1107 Mixer Grinder, stainless steel construction Rigging and removal cost: $1450. For rigging and removal, please contact Mark at Gol...

Weiler, Mdl. 1107 Mixer Grinder, stainless steel construction Rigging and removal cost: $1450. For rigging and removal, please contact Mark at Gol...

Operator work platform, stainless steel, 5 stairs with hand rails and grip strut surface. Rigging and removal cost: $75. For rigging and removal, ...

Wash station, stainless steel, with hose, wall mounted Rigging and removal cost: $150. For rigging and removal, please contact Mark at Golden Bear...

Custom Incline Conveyor, 24’overall length, 6’ horizontal & 18’ incline to 8’ tall. 18” wide white cleated conveyor belt Rigging and removal cost:...

Transfer conveyor, 29’ long x 18” wide plastic conveyor belt, includes 4 pneumatic diverters, requires a sub frame. Rigging and removal cost: $180...

Nutec Former, Mdl. 760 (Provatec) Patty forming machine, SN: 95.072, includes tooling and (1) paper feed hopper for 4.25” X 4.75” patty paper, 460...

Nutec Former, Mdl. 760 (Provatec) Patty forming machine, SN: 760.06.143, includes tooling and (1) paper feed hopper for 4.25” X 4.75” patty paper,...

Nutec Former, Mdl. 760 (Provatec) Patty forming machine, SN: 760.09.153, includes tooling and (1) paper feed hopper for 4.25” X 4.75” patty paper,...

Nutec Former, Mdl. 760 (Provatec) Patty forming machine, SN: 760.10.158, includes tooling and (1) paper feed hopper for 4.25” X 4.75” patty paper,...

Nutec Former, Mdl. 760 (Provatec) Patty forming machine, includes tooling and (1) paper feed hopper for 4.25” X 4.75” patty paper, 460V/3Ph/60h Ri...

Wash station, stainless steel, with hose, wall mounted Rigging and removal cost: $150. For rigging and removal, please contact Mark at Golden Bear...

Bunting Metal detector, SN:921025, 29.5” X 5.75” aperture, 27” wide plastic belt, 43” length. Rigging and removal cost: $$350.00 palletized. For r...

Bunting Metal detector, 29.5” X 5.75” aperture, 27” wide plastic belt, 43” length. Rigging and removal cost: $$350.00 palletized. For rigging and ...

Non powered double tier roller conveyor, 24” wide, 68” length, left hand turn. Rigging and removal cost: $150. For rigging and removal, please con...

Transfer conveyor, dual tier, 24” wide plastic belt, top tier: 15' ft long, bottom tier 17' long Rigging and removal cost: $250. For rigging and r...

Lot 65

Utility Table

Utility table, stainless steel, 22” wide x , 11' long, on casters. Rigging and removal cost: $$50.00 as is. For rigging and removal, please contac...

Hand Wash Station, stainless steel, 7 hand wash stations with single meat wash sink. Rigging and removal cost: $500. For rigging and removal, plea...

Chandler 4 fan Evaporator, Mdl. HHF710CPA, 4.6 tons, 3/4hp motors, R-22. Rigging and removal cost: $600. For rigging and removal, please contact M...

Loading...Loading...
  • 196 item(s)
    /page

Recently Viewed Lots