345
Dodge Dart
1/25
Please confirm your bid
You are about to place a bid of USD
Timed Auction:Current bid:
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
Please confirm purchase
You are about to buy this lot for
USD.
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
Proceed With Buy It Now?
We have noticed that your maximum bid is higher or equal to the buy it now price for this lot.
Would you like to discard your maximum bid and proceed with the buy it now option?
Warning
You cannot Buy it now until you are approved to bid.
Please contact the auctioneer (480-225-6607)
Your bid is off increment
Choose one of the quick bid options below:
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
Your bid is below the current minimum bid
To place a bid select the minimum amount below:
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
Description
1972 Dodge Dart Roller. Drag race car, Dana 60 narrowed rear, spool, 5:88 ring gear, Weld Wheels, mini tubbed, 6 point cage ( uncertified ), fiberglass hood, Aluminum dash, Butler racing seats ( not installed ), engine plates, New brake lines and line lock.
The car comes with almost everything needed to complete the build. Braided fuel line, complete race wiring kit with switch panel, Radiator, electric fan, transmission cooler, fuel pump and filter, HD driveshaft ( 1350 u joints ).
Car comes with bill of sale ( untitled for over 35 years ) RACE CAR.
Engine: 440 RB Chrysler, block has extensive race work, zero deck height, line bored, cam bearings lapped for clearances, oversized oil pickup, Chrysler steel crank turned and polished, Eagle I beam rods ( new ), Ross 14cc Pistons milled for exact valve clearances, edelbrock performer aluminum heads, milled for compression, stage 2 port work ( compuflow ), custom ground comp flat tappet cam, cloyes chain, Harland Sharp rocker arms, Port matched M1 intake, AES 950 HO double pumper carb NIB, Fluid damper, more…..
Transmission: 727 torqueflight, complete rebuild, Manual valve body with trans brake, New billet Sprague, 8 inch torque converter.
Auction Details
Rigging/Removals
T&Cs & Important Info
Ask seller a question
1972 Dodge Dart Roller. Drag race car, Dana 60 narrowed rear, spool, 5:88 ring gear, Weld Wheels, mini tubbed, 6 point cage ( uncertified ), fiberglass hood, Aluminum dash, Butler racing seats ( not installed ), engine plates, New brake lines and line lock.
The car comes with almost everything needed to complete the build. Braided fuel line, complete race wiring kit with switch panel, Radiator, electric fan, transmission cooler, fuel pump and filter, HD driveshaft ( 1350 u joints ).
Car comes with bill of sale ( untitled for over 35 years ) RACE CAR.
Engine: 440 RB Chrysler, block has extensive race work, zero deck height, line bored, cam bearings lapped for clearances, oversized oil pickup, Chrysler steel crank turned and polished, Eagle I beam rods ( new ), Ross 14cc Pistons milled for exact valve clearances, edelbrock performer aluminum heads, milled for compression, stage 2 port work ( compuflow ), custom ground comp flat tappet cam, cloyes chain, Harland Sharp rocker arms, Port matched M1 intake, AES 950 HO double pumper carb NIB, Fluid damper, more…..
Transmission: 727 torqueflight, complete rebuild, Manual valve body with trans brake, New billet Sprague, 8 inch torque converter.
Aerospace Precision CNC Shop Auction
Ends from
Venue Address
3331 N. Palo Verde Ave.
Tucson
Arizona
85716
United States
-
Coordination and Removal: It is the buyer's responsibility to coordinate the pickup of purchased items. The deadline for item removal is , September 24th, 2024, at 2:30 pm. This must be done at the buyer's expense.
-
Payment for Pickup: The buyer is also responsible for paying any expenses related to the pickup, including but not limited to transport costs, rigging costs, and any other associated expenses.
-
Non-Responsibility of Midstate Machinery: Midstate Machinery is not liable for any expenses incurred by the buyer, including legal fees, transport costs, rigging costs, or any other expenses arising from the buyer's failure to coordinate or pay for item pickup.
These terms emphasize the buyer's responsibility for coordinating and paying for the pickup of purchased items, as well as absolving Midstate Machinery of any liability for expenses incurred due to the buyer's actions or inactions.
-
Onsite Riggers
Important Information
CNC machines, Machine shop, Haas Machines, Tooling, Support Equipment ECT. Everything must go!!
Inspection will be held on September 17th 2024 from 9:30AM to 2:00 Local Time
Check out will be on September 19 & 20th & September 23rd - 25th 8:30am to 2:30pm Everything must be out by 3:00pm September 25th 2024
=====================================================
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
- Monday – Friday, 8:00 AM ET – 8:00 PM ET
Email: support@bidspotter.com
Office: 253-858-6777 Toll Free: 866-597-2437
Terms and Conditions
ALL INVOICES MUST BE PAID WITHIN 24 HOURS OF RECIPT.
-
Payment Methods: Payment must be made through Midstate Machinery via either Wire Transfer or Credit Card. If paying by Credit Card, there is a 3.5% processing fee.
-
Payment Deadline: Invoices must be paid within 24 hours of receiving them.
-
Condition of Items: All items are sold "AS-IS Where-Is." This means that Midstate Machinery does not provide any warranties regarding the condition or working order of the items or lots being sold. Bidders are responsible for verifying the conditions themselves.
-
Sales Final: All sales are final with no return options. Once a purchase is made, it cannot be returned.
-
Payment Instructions: Payments should be made directly to Midstate Machinery and not through any Bidspotter.
It's important for buyers to carefully review and understand these terms before making a purchase through Midstate Machinery Auctions
