121
Haas VF4SS Vertical Machining Center 12k Spindle
1/12
Please confirm your bid
You are about to place a bid of USD
Timed Auction:Current bid:
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
Please confirm purchase
You are about to buy this lot for
USD.
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
Proceed With Buy It Now?
We have noticed that your maximum bid is higher or equal to the buy it now price for this lot.
Would you like to discard your maximum bid and proceed with the buy it now option?
Warning
You cannot Buy it now until you are approved to bid.
Please contact the auctioneer (480-225-6607)
Your bid is off increment
Choose one of the quick bid options below:
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
Your bid is below the current minimum bid
To place a bid select the minimum amount below:
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
Description
:Haas CNC Control
12000 RPM Inline Direct Drive Spindle
24 Station Super Speed Side Mount Tool changer
1400 IPM Fast Rapid
Renishaw Probing Ready
4th Axis Ready
High speed Machining
Hand Wheel
Extended Memory
Quick Code Programmin
gProgrammable CoolantT
Chip auger
Spindle:Taper Size: 40
Speed Range: 12000 RPM
Spindle Power: 30 HPVector Dual Drive
Max Torque: 90ft-lb @2000 RPM
Table:Length: 52″Width: 18″
Weight on Table: 1750 lbs
Specifications:Travels:
:X-Axis: 50″
Y-Axis: 26″
Z-Axis: 25″
Rapid Traverse Rates: 1400 Inch Per MinuteCutting
Feed Rates: 833 Inch Per MinuteSpindle
Nose to Table (Min.- Max.): 4.2″ – 29.2
″Automatic Tool Changer:Capacity: 24
Max Tool Weight: 12 lbsMax Tool Dia: 2.5″
Max Tool Length: 16″Tool
Changing Time: 1.8 Seconds
General:Air Required: 100 psi, 4 scfm
Power: 220v / 66FLA / 3-PhaseOverall
Dimensions: 152″ x 99″ x 106″ HighWeight: 13800 lbs
Equipped with Probe Eye
4th Axis Ready
High Intense Lighting
Chip Auger
Auction Details
Rigging/Removals
T&Cs & Important Info
Ask seller a question
:Haas CNC Control
12000 RPM Inline Direct Drive Spindle
24 Station Super Speed Side Mount Tool changer
1400 IPM Fast Rapid
Renishaw Probing Ready
4th Axis Ready
High speed Machining
Hand Wheel
Extended Memory
Quick Code Programmin
gProgrammable CoolantT
Chip auger
Spindle:Taper Size: 40
Speed Range: 12000 RPM
Spindle Power: 30 HPVector Dual Drive
Max Torque: 90ft-lb @2000 RPM
Table:Length: 52″Width: 18″
Weight on Table: 1750 lbs
Specifications:Travels:
:X-Axis: 50″
Y-Axis: 26″
Z-Axis: 25″
Rapid Traverse Rates: 1400 Inch Per MinuteCutting
Feed Rates: 833 Inch Per MinuteSpindle
Nose to Table (Min.- Max.): 4.2″ – 29.2
″Automatic Tool Changer:Capacity: 24
Max Tool Weight: 12 lbsMax Tool Dia: 2.5″
Max Tool Length: 16″Tool
Changing Time: 1.8 Seconds
General:Air Required: 100 psi, 4 scfm
Power: 220v / 66FLA / 3-PhaseOverall
Dimensions: 152″ x 99″ x 106″ HighWeight: 13800 lbs
Equipped with Probe Eye
4th Axis Ready
High Intense Lighting
Chip Auger
Aerospace Precision CNC Shop Auction
Ends from
Venue Address
3331 N. Palo Verde Ave.
Tucson
Arizona
85716
United States
-
Coordination and Removal: It is the buyer's responsibility to coordinate the pickup of purchased items. The deadline for item removal is , September 24th, 2024, at 2:30 pm. This must be done at the buyer's expense.
-
Payment for Pickup: The buyer is also responsible for paying any expenses related to the pickup, including but not limited to transport costs, rigging costs, and any other associated expenses.
-
Non-Responsibility of Midstate Machinery: Midstate Machinery is not liable for any expenses incurred by the buyer, including legal fees, transport costs, rigging costs, or any other expenses arising from the buyer's failure to coordinate or pay for item pickup.
These terms emphasize the buyer's responsibility for coordinating and paying for the pickup of purchased items, as well as absolving Midstate Machinery of any liability for expenses incurred due to the buyer's actions or inactions.
-
Onsite Riggers
Important Information
CNC machines, Machine shop, Haas Machines, Tooling, Support Equipment ECT. Everything must go!!
Inspection will be held on September 17th 2024 from 9:30AM to 2:00 Local Time
Check out will be on September 19 & 20th & September 23rd - 25th 8:30am to 2:30pm Everything must be out by 3:00pm September 25th 2024
=====================================================
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
- Monday – Friday, 8:00 AM ET – 8:00 PM ET
Email: support@bidspotter.com
Office: 253-858-6777 Toll Free: 866-597-2437
Terms and Conditions
ALL INVOICES MUST BE PAID WITHIN 24 HOURS OF RECIPT.
-
Payment Methods: Payment must be made through Midstate Machinery via either Wire Transfer or Credit Card. If paying by Credit Card, there is a 3.5% processing fee.
-
Payment Deadline: Invoices must be paid within 24 hours of receiving them.
-
Condition of Items: All items are sold "AS-IS Where-Is." This means that Midstate Machinery does not provide any warranties regarding the condition or working order of the items or lots being sold. Bidders are responsible for verifying the conditions themselves.
-
Sales Final: All sales are final with no return options. Once a purchase is made, it cannot be returned.
-
Payment Instructions: Payments should be made directly to Midstate Machinery and not through any Bidspotter.
It's important for buyers to carefully review and understand these terms before making a purchase through Midstate Machinery Auctions
