Lot

0C

2009 Makino S56 CNC Vertical Machining Center, S/N V110250, Makino Professional 5 CNC Control, 30-St

In Dynamic Tool & Mold

This auction is live! You need to be registered and approved to bid at this auction.
You have been outbid. For the best chance of winning, increase your maximum bid.
Your bid or registration is pending approval with the auctioneer. Please check your email account for more details.
Unfortunately, your registration has been declined by the auctioneer. You can contact the auctioneer on 513-738-3311 for more information.
You are the current highest bidder! To be sure to win, log in for the live auction broadcast on or increase your max bid.
Leave a bid now! Your registration has been successful.
Sorry, bidding has ended on this item. We have thousands of new lots everyday, start a new search.
Bidding on this auction has not started. Please register now so you are approved to bid when auction starts.
2009 Makino S56 CNC Vertical Machining Center, S/N V110250, Makino Professional 5 CNC Control, 30-St
Auctioneer has chosen not to publish the price of this lot
North Royalton, Ohio
8.00%
18.00%
2009 Makino S56 CNC Vertical Machining Center, S/N V110250, Makino Professional 5 CNC Control, 30-Station ATC, 39-1/4" X 19-1/2" Table, 3-Axis

(2) 2007 Makino SP43 Wire Edm Machines, S/N W7514 & W7454, Makino MGW-S5 DRO Stations, 28-3/4" X 23" Worktable

Fanuc Robocut A-0IA Wire EDM Machine, Fanuc Series 18I-W Control, 21" X 14" Worktable, Water Cooler Unit

2001 Actspark SP3 CNC Sinker EDM Machine, S/N 005-009, 500 MM X 800 MM Worktable, Travel X-Y-Z = 500x400x400 MM, Pendant Control

2017 Charmilles Form 300 CNC Sinker EDM Machine, Series +GF+, 28-1/2" X 23-1/2" Worktable, System 3R, 6-Station ATC, Pendant Control, S/N 592.063.311.0197

2013 Litz Diamond Cut DV-1000 CNC Vertical Machining Center, S/N 61J100199, CAT-40 Taper, Mitsubishi M70 CNC Control, 24-Station ATC, 39-1/4" X 22" Table

Kurt Angle Lock & Assorted Machine Vises, Up To 8"

2003 Clausing Colchester Horizontal Engine Lathe, Model TRIUMPH V/S, 62" Bed, Tailstock, Cross Slide, Tool Post, 2-1/2" Bar Through Spindle, 10" 3-Jaw Chuck, S/N VT1505

2001 Makino Max 65S CNC Vertical Machining Center, 34-1/2" X 18" Table, 20-Station ATC, Type MAX65SA20, S/N V6073

Selection of CAT-40 Taper Tool Holders w/ Tooling; Collet, Face Mill, Shaft & Chuck Types

(2) Acra-Mill Vertical Milling Machine, Model A, Anilam Wizard 411 & Sargon 2-Axis DRO Controls, 49" X 9" Servo Table, Knee Bed, High/ Lo @ 60-4200 RPM, 3 HP

Bridgeport Vertical Milling Machine, 2 Hp, ZS Systems 3-Axis DRO Control, 48" X 9" Servo Table, Knee Bed

(3) Cross-Slide Rotary Tables; Advance & Bridgeport

Bridgeport Vertical Milling Machine, 2 HP, Anilam Wizard 411 2-Axis DRO Control, 48" X 9" Servo Table, Knee Bed

Bridgeport Series 1 Vertical Milling Machine, 2 HP, Fagor Innova 2-Axis DRO Control, 42" X 9" Servo Table

(2) Bridgeport Vertical Milling Machines, 1 HP, Variable Speed, Mitutoyo 2-Axis DRO Control, 42" X 9" Table, Knee Bed

Delta 4-Station Vertical Drill Press Table w/ Drill Presses, 77" X 23-1/2" Table

Wilton 20" Drill Press, 12-Speed, 5/8" Chuck, 150-4200 RPM, 14" X 16" Table

Powermatic Vertical Drill Press, Model 1200, S/N 9620V269, Variable Speed, 18" X 15-1/2" Table

Powermatic Vertical Band Saw, 24" X 24" Contour Table, Q9 1/2" Throat, Band Welder, Model 87, S/N 66-6366

Wells Horizontal Metal Band Saw, Model 8M, S/N 10939

Trinco Dry Blast Cabinet, Model 48X24SL/BP, S/N 50480-9

Tempcraft 35-Ton Vari-Flex Wax Injector Machine, S/N 1205, 30-1/4" X 29" Platen, DRO Station Controls

Lincoln SP-1357 Welder on Bottle Cart

Acetylene Torch Cart

Craftsman 10" Radial Arm Saw on HD Table Stand

Waterloo, Craftsman, & Kennedy Rolling Tool Cabinets

Heck Bevel-Mill, Model VA400, S/N 4013

SEC Universal Cutter Grinder, Type SC-6

2020 Gardner-Denver Air Compressor, Model L07, S/N D210953, GD Pilot DRO, Air Cooled, 10 HP, 4475 RPM, 110 PSIG, 230/3/60V

Ingersoll-Rand Air Compressor, Model SSR-EP10, 10 HP, 37 CFM, 125 PSIG, S/N LX5508U03170

Keltec Air Dryer, Model KRAD-25

Ingersoll-Rand 80-Gallon Vertical Air Compressor, Model 2475N7-5, 24 CFM, 1500 RPM, 175 PSIG

(2) Okamoto E6-18 Automatic Surface Grinders, 17-5/8" X 6" Permanent Magnetic Chucks, 8,000 SFPM, 8" D-Max., 1.25" ID, 1" W-Max., Sino SDS6 2-Axis DRO Control

Okamoto Grind-X ACC12-24ST Hydraulic Surface Grinder, S/N 83741, 23-5/8" X 11-3/4" Permanent Magnetic Chuck

Torit Dust Collector, Model 84, S/N D2606, 3 HP

Porter-Cable 4" Vertical Belt Sander, 3/4 HP

Baldor Double-End Pedestal Grinders & Buffers

Donaldson Torit Cyclone Dust Collector, Model 16CYC, 2 HP, 208-460V, 60H, 3PH, w/ Stand

Gardner Hand-Feed Surface Grinder, Model 618, S/N 892-2, 18" X 6" PMC

Caterpillar 5,000 LB. Forklift, Model T500, S/N 8EB08210, LP, 188" Lift Height, 20,163 Hours, 82-1/2" 3-Stage Mast, Smooth Solid Wide Tires

2001 Brown & Sharpe Microxcel PFX 4.5.4 3-Axis CMM Machine, w/ Probe, S/N 0301-1824, 29-1/2" X 21-3/4" Granite Table @ 500 LB. Max. Capacity

Steinbichler Comet L3D Blue Light Inspection System, Set-Up Pallets, (4) Lenses, Turntable, Software Programming & System, Hard Cases, S/N 0046-YOM2011

Craftsman Gas Pressure Washer

Barrel Floor Fan

Work Tables & Benches, Some w/ Bench Vises

Selection of Granite Surface Plates, Up To 10" Thick & 4' Long, Bench Top & on HD Steel Stands

Flammable Storage Cabinet

Precision Inspection & Gauging Equipment; Digital/ Mechanical Height Gauges, Digital Calipers, Micrometer Sets & Single, Sine Plates, Angle Blocks, 1-2-3 Blocks, Pin & Block Gauge Sets, Parallels

Starrett Altissimo Platinum Digital Height Gauge, Model 2001-24

Mitutoyo Height Master Check Gauge

Bench Top Tool Changers

(2) Lista Modular Tool Cabinets w/ Reamers, Taps, Drills, Dowels, Hardware, Core Die Pins, & More

Rack w/ Assorted Cut-Off Metal Stock

(2) Die Lift Scissor Tables

Lathe Support Tooling

Quantity of Perishable Tooling, Drill Bits & Drill Indexes

C-Clamps & Kant Twist Clamps

Hammer Letter/ Number Stamps

(2) Spindle Indexers

Pallet Racking & Shelves w/ Misc. Content

Shop Vacuum

(2) Pipe Rollers

Greenerd 3-1/2 Arbor Press

Manual Tap Set

Misc. Pick-Up Items & Office Equipment

1980 LeBlond Lathe

Dumore Tool Post Grinder

Vertical & Horizontal Band Saws

Eaton Air Compressor

Cincinnati Spindle Mill

Fosdick Radial Arm Drill

Drill Press

Bridgeport Discovery Torq-Out 22 Cut & Machining Center

Carolina H-Frame Press

Shelf w/ Parts

Table w/ Scrap Steel

Covel Surface Grinder

(2) Chevalier Surface Grinders, FSG-618M

Workbench

Double-End Grinder

Ladder

Belt Sander

Cincinnati Bickford Drill Press

1957 Johnson 125-Ton OBI Press

LeBlond Makino Wire EDM EC 750

Enco Mill w/ Kurt Vise

Snap-On Mig Welder, YA205

Precise Jig Borer



2009 Makino S56 CNC Vertical Machining Center, S/N V110250, Makino Professional 5 CNC Control, 30-Station ATC, 39-1/4" X 19-1/2" Table, 3-Axis

(2) 2007 Makino SP43 Wire Edm Machines, S/N W7514 & W7454, Makino MGW-S5 DRO Stations, 28-3/4" X 23" Worktable

Fanuc Robocut A-0IA Wire EDM Machine, Fanuc Series 18I-W Control, 21" X 14" Worktable, Water Cooler Unit

2001 Actspark SP3 CNC Sinker EDM Machine, S/N 005-009, 500 MM X 800 MM Worktable, Travel X-Y-Z = 500x400x400 MM, Pendant Control

2017 Charmilles Form 300 CNC Sinker EDM Machine, Series +GF+, 28-1/2" X 23-1/2" Worktable, System 3R, 6-Station ATC, Pendant Control, S/N 592.063.311.0197

2013 Litz Diamond Cut DV-1000 CNC Vertical Machining Center, S/N 61J100199, CAT-40 Taper, Mitsubishi M70 CNC Control, 24-Station ATC, 39-1/4" X 22" Table

Kurt Angle Lock & Assorted Machine Vises, Up To 8"

2003 Clausing Colchester Horizontal Engine Lathe, Model TRIUMPH V/S, 62" Bed, Tailstock, Cross Slide, Tool Post, 2-1/2" Bar Through Spindle, 10" 3-Jaw Chuck, S/N VT1505

2001 Makino Max 65S CNC Vertical Machining Center, 34-1/2" X 18" Table, 20-Station ATC, Type MAX65SA20, S/N V6073

Selection of CAT-40 Taper Tool Holders w/ Tooling; Collet, Face Mill, Shaft & Chuck Types

(2) Acra-Mill Vertical Milling Machine, Model A, Anilam Wizard 411 & Sargon 2-Axis DRO Controls, 49" X 9" Servo Table, Knee Bed, High/ Lo @ 60-4200 RPM, 3 HP

Bridgeport Vertical Milling Machine, 2 Hp, ZS Systems 3-Axis DRO Control, 48" X 9" Servo Table, Knee Bed

(3) Cross-Slide Rotary Tables; Advance & Bridgeport

Bridgeport Vertical Milling Machine, 2 HP, Anilam Wizard 411 2-Axis DRO Control, 48" X 9" Servo Table, Knee Bed

Bridgeport Series 1 Vertical Milling Machine, 2 HP, Fagor Innova 2-Axis DRO Control, 42" X 9" Servo Table

(2) Bridgeport Vertical Milling Machines, 1 HP, Variable Speed, Mitutoyo 2-Axis DRO Control, 42" X 9" Table, Knee Bed

Delta 4-Station Vertical Drill Press Table w/ Drill Presses, 77" X 23-1/2" Table

Wilton 20" Drill Press, 12-Speed, 5/8" Chuck, 150-4200 RPM, 14" X 16" Table

Powermatic Vertical Drill Press, Model 1200, S/N 9620V269, Variable Speed, 18" X 15-1/2" Table

Powermatic Vertical Band Saw, 24" X 24" Contour Table, Q9 1/2" Throat, Band Welder, Model 87, S/N 66-6366

Wells Horizontal Metal Band Saw, Model 8M, S/N 10939

Trinco Dry Blast Cabinet, Model 48X24SL/BP, S/N 50480-9

Tempcraft 35-Ton Vari-Flex Wax Injector Machine, S/N 1205, 30-1/4" X 29" Platen, DRO Station Controls

Lincoln SP-1357 Welder on Bottle Cart

Acetylene Torch Cart

Craftsman 10" Radial Arm Saw on HD Table Stand

Waterloo, Craftsman, & Kennedy Rolling Tool Cabinets

Heck Bevel-Mill, Model VA400, S/N 4013

SEC Universal Cutter Grinder, Type SC-6

2020 Gardner-Denver Air Compressor, Model L07, S/N D210953, GD Pilot DRO, Air Cooled, 10 HP, 4475 RPM, 110 PSIG, 230/3/60V

Ingersoll-Rand Air Compressor, Model SSR-EP10, 10 HP, 37 CFM, 125 PSIG, S/N LX5508U03170

Keltec Air Dryer, Model KRAD-25

Ingersoll-Rand 80-Gallon Vertical Air Compressor, Model 2475N7-5, 24 CFM, 1500 RPM, 175 PSIG

(2) Okamoto E6-18 Automatic Surface Grinders, 17-5/8" X 6" Permanent Magnetic Chucks, 8,000 SFPM, 8" D-Max., 1.25" ID, 1" W-Max., Sino SDS6 2-Axis DRO Control

Okamoto Grind-X ACC12-24ST Hydraulic Surface Grinder, S/N 83741, 23-5/8" X 11-3/4" Permanent Magnetic Chuck

Torit Dust Collector, Model 84, S/N D2606, 3 HP

Porter-Cable 4" Vertical Belt Sander, 3/4 HP

Baldor Double-End Pedestal Grinders & Buffers

Donaldson Torit Cyclone Dust Collector, Model 16CYC, 2 HP, 208-460V, 60H, 3PH, w/ Stand

Gardner Hand-Feed Surface Grinder, Model 618, S/N 892-2, 18" X 6" PMC

Caterpillar 5,000 LB. Forklift, Model T500, S/N 8EB08210, LP, 188" Lift Height, 20,163 Hours, 82-1/2" 3-Stage Mast, Smooth Solid Wide Tires

2001 Brown & Sharpe Microxcel PFX 4.5.4 3-Axis CMM Machine, w/ Probe, S/N 0301-1824, 29-1/2" X 21-3/4" Granite Table @ 500 LB. Max. Capacity

Steinbichler Comet L3D Blue Light Inspection System, Set-Up Pallets, (4) Lenses, Turntable, Software Programming & System, Hard Cases, S/N 0046-YOM2011

Craftsman Gas Pressure Washer

Barrel Floor Fan

Work Tables & Benches, Some w/ Bench Vises

Selection of Granite Surface Plates, Up To 10" Thick & 4' Long, Bench Top & on HD Steel Stands

Flammable Storage Cabinet

Precision Inspection & Gauging Equipment; Digital/ Mechanical Height Gauges, Digital Calipers, Micrometer Sets & Single, Sine Plates, Angle Blocks, 1-2-3 Blocks, Pin & Block Gauge Sets, Parallels

Starrett Altissimo Platinum Digital Height Gauge, Model 2001-24

Mitutoyo Height Master Check Gauge

Bench Top Tool Changers

(2) Lista Modular Tool Cabinets w/ Reamers, Taps, Drills, Dowels, Hardware, Core Die Pins, & More

Rack w/ Assorted Cut-Off Metal Stock

(2) Die Lift Scissor Tables

Lathe Support Tooling

Quantity of Perishable Tooling, Drill Bits & Drill Indexes

C-Clamps & Kant Twist Clamps

Hammer Letter/ Number Stamps

(2) Spindle Indexers

Pallet Racking & Shelves w/ Misc. Content

Shop Vacuum

(2) Pipe Rollers

Greenerd 3-1/2 Arbor Press

Manual Tap Set

Misc. Pick-Up Items & Office Equipment

1980 LeBlond Lathe

Dumore Tool Post Grinder

Vertical & Horizontal Band Saws

Eaton Air Compressor

Cincinnati Spindle Mill

Fosdick Radial Arm Drill

Drill Press

Bridgeport Discovery Torq-Out 22 Cut & Machining Center

Carolina H-Frame Press

Shelf w/ Parts

Table w/ Scrap Steel

Covel Surface Grinder

(2) Chevalier Surface Grinders, FSG-618M

Workbench

Double-End Grinder

Ladder

Belt Sander

Cincinnati Bickford Drill Press

1957 Johnson 125-Ton OBI Press

LeBlond Makino Wire EDM EC 750

Enco Mill w/ Kurt Vise

Snap-On Mig Welder, YA205

Precise Jig Borer



Dynamic Tool & Mold

Sale Date(s)
Venue Address
Dynamic Tool & Mold
12126 York Road
Front North
North Royalton
Ohio
44133
United States

RIGGERS:
Keller Rigging, LLC
David Keller - dkeller@KellerRiggingLLC.com 
(330) 606-2394

Last day for removal is Monday, November 27, 2023.

Important Information

CNC Machining, EDMs, Mold-making Equipment

Featuring: 2017 Agie Charmilles Form 300 EDM • (2) Makino SP43 EDMs • Fanuc Robocut EDM • ACT Spark EDM • 2013 MC Milling/Mitsubishi Diamond Cut DV-1000 CNC VMC • Makino S56 CNC VMC • Makino Max 65S CNC VMC • Tempcraft Wax Injector • (3) Okamoto Surface Grinders • (5) Bridgeport Mills • Lathes, Drills • Bandsaw • Inspection Equipment • Air Compressors

If you need additional information on equipment at this auction, contact Greg Hengehold at Greg@MyronBowling.com or (513) 520-7636.

Auction starts at 10 AM ET. Register 24 hours prior to start of auction.

INSPECTION: 
November 8 from 9:00 AM to 4:00 PM ET

Greg's Tool & Machine
1537 Hutchins Ave Suite D Columbus Indiana 
Greg Westerfield
812-371-9394

Call to schedule an inspection appointment



NO ON-SITE BIDDING

MBA webpage details   Video   Brochure

Must have deposit or bank letter to bid.

Call for wire instructions 513/738-3311
Fax bank letter 513/738-0221

BidSpotter Customer Service Support Department

Have a question pertaining to the bidding process? 

Visit our Frequently Asked Questions! 

You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.

 

 Customer Support Hours:

  • Monday – Thursday, 8:00 AM EST – 10:00 PM EST
  • Friday, 8:00 AM EST – 6:30 PM EST

 

Email: support@bidspotter.com

Office: (253) 858-6777      Toll Free: (866) 597-2437

Frequently Asked Questions

Terms and Conditions

NOTICE:  All Bidders and other persons attending this sale agree that they have read and have full knowledge of these terms and agree to be bound thereby.


1.  IDENTIFICATION
– All purchasers are required to give full name and address at time of registration.

2.  DEPOSIT – Each Buyer will be required to make a deposit in cash or by certified check of 25 percent of the bid on each lot at the time of knockdown.  In default of such deposit, the lot may be put up again immediately and resold.

3.  TIME OF PAYMENT – All invoices must be paid in full by the sales conclusion.  Any other arrangements must be made with Auctioneer prior to bidding.  If not, the merchandise will be deemed abandoned and Buyer will lost any right, title or interest Buyer may have acquired and the merchandise shall revert and repossess to Auctioneer without further notice to Buyer and the transaction shall be null and void as to Buyer.

4.  REMOVAL – All purchases must be removed not later than the date specified in the auction Catalogue and/or announced at the sale time.  No lot can, on any account, be removed during the sale.  All goods are sold “Where Is”.  Removal shall be at the expense, risk and liability of the Buyer.  Purchases will be delivered only on presentation of paid bill.  Auctioneer shall not be responsible for goods not removed within the time allowed, but shall have the option to remove and store at the expense and risk of the Buyer any article purchased, but not paid for and removed within the time aforesaid.

Buyer understands and agrees that all items offered at auction are subject to U.S. international trade requirements and any items intended for subsequent export outside of the U.S. may be subject to export controls, sanctions or other international trade restrictions.  Buyer is responsible for compliance with such requirements including obtaining any export licenses or authorizations necessary for export of the items.

5.  MANNER OF PAYMENT – All payments must be made by cash, cashier’s check or company check with a bank letter of authorization guaranteeing funds to Myron Bowling Auctioneers.  All check for deposits and balances due shall be payable to the order of “Myron Bowling Auctioneers”.  All bills must be paid to representatives of the Auctioneer at the plant unless otherwise announced.  The full purchase price on all lots sold to the same Buyer must be paid within the time fixed and before removal of any goods.

6.  CONDITION OF ARTICLES SOLD – The Auctioneer shall not be responsible for the correct description, genuineness, authenticity of, or defect in any lot, and makes no warranty in connection therewith.  NO sale will be set aside nor allowance made on account of any incorrectness, error in commentary, cataloguing, or any imperfection not noted.  No deduction allowed on damages articles, all goods being exposed for public exhibition are purchased and accepted by Buyer “AS IS”, “WHERE IS” and “WITH ALL FAULTS”.  Auctioneer makes no warranties or guarantees whatsoever whether written, oral or implied as to quality, quantity, condition, usability, salability, weight, measurement, year, model, mechanical condition, performance or other specifications and without recourse.

7.  CLAIMS – No Claims will be allowed after removal of goods from premises.

8.  RESPONSIBILITY FOR NON-DELIVERY – Auctioneer shall not, in any event, be liable for non-delivery of such lot, storage or removal fees or costs, lien satisfaction or for any other matter or thing, to any Buyer of any lot, other than for the return to the Buyer of the deposit or sum paid on said lot, should the Buyer be entitled thereto.

9.  COMPLIANCE WITH TERMS OF SALE – In default of payment of bills in full within the time therein specified, the Auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages.  Lots not paid for and removed within the time allowed herein may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charges of re-sale, will be charged to the defaulting purchaser.

10. RISK TO PERSON AND PROPERTY – Persons attending during exhibition, sale or removal of goods assume all risks of damage of or loss to person and property and specifically release the Auctioneer from liability therefor.  Neither the Auctioneer nor his principal shall be liable by reason or any defect in or condition of the premises on which the sale is held.

11. ADDITION TO OR WITHDRAWAL FROM SALE – The Auctioneer reserves the right to alter the order of the sale, withdrawal from the sale any of the property listed or to sell at this sale property not listed, and also reserves the right to group one or more lots into one or more selling lots or to subdivide into two or more selling lots.  Whenever the best interest of the Seller will be served, the Auctioneer reserves the right to sell property listed, in bulk.

12. SALE BY ESTIMATED WEIGHT, COUNTY OR MEASURE – Where items are sold by estimated weight, count or measure, the Buyer will be billed for and required to pay for the estimated weight, count or measure.  If, upon delivery, any shortage exists, the Buyer will receive a refund at the rate of the purchase.  If there be an excess, the Buyer will be required to take and pay for such excess, at the rate of the purchase.

13. DISPUTE BETWEEN BIDDERS/BID INCREMENTS – If any dispute arises between two or more bidders, the Auctioneer may decide the same or put the lot up for sale again at once, or resell to the highest bidder.  Auctioneer may reject a nominal or fractional bid advance if, in his estimation, it proves injurious to the sale.  The Auctioneer’s decision shall be final and absolute.

14. RESERVE – The Auctioneer reserves the right to reject any and all bids.  On lots upon which there is a reserve, the Auctioneer shall have the right to bid on behalf of the Seller.

15. RECORDS – The record of sale kept by the Auctioneer and bookkeeper will be taken as final in the event of any dispute.

16. AGENCY – The Auctioneer is acting as agent only and is not responsible for the acts of its principals.

17. SALES TAX – All sales are subject to state and local taxes, unless a proper exemption certificate including tax exempt number is presented at the time of payment.

18. BUYER’S PREMIUM – The Auctioneer in its sole discretion may impose a Buyer’s Premium on any goods sold.  The Buyer’s Premium is a percentage that is added to the final purchase price of any items.

19. SHIPPING – All coolants, oil and fluids must be drained from all machinery and equipment prior to removal.  All of the above must be shipped in compliance with state and federal regulations.

20. INSURANCE – All Buyers, or the Buyer’s riggers, must provide the Auctioneer, Owner and Landlord a certificate of insurance in amounts acceptable to the above parties prior to removal of any machinery and equipment.

21. ADDITIONAL TERMS AND CONDITIONS – The Auctioneer may modify or supplement these terms and conditions of sale by language in the catalog available at the sale site or by announcement at the start of the sale.

See Full Terms And Conditions