Lot

0C

Preliminary Equipment List

In Bower & Associates, Inc.

This auction is live! You need to be registered and approved to bid at this auction.
You have been outbid. For the best chance of winning, increase your maximum bid.
Your bid or registration is pending approval with the auctioneer. Please check your email account for more details.
Unfortunately, your registration has been declined by the auctioneer. You can contact the auctioneer on 513 738 3311 for more information.
You are the current highest bidder! To be sure to win, log in for the live auction broadcast on or increase your max bid.
Leave a bid now! Your registration has been successful.
Sorry, bidding has ended on this item. We have thousands of new lots everyday, start a new search.
Bidding on this auction has not started. Please register now so you are approved to bid when auction starts.
Preliminary Equipment List
Auctioneer has chosen not to publish the price of this lot
Jeffersonville, Indiana
7.25%
18.00%

CAT T300 LP Forklift w/ Manual Boom, S/N 716363 (F30)

CAT T400 Gas Forklift (F40)

Taylor LP Forklift, 30,000-LB., 7,400 Hours, TC-300S, S/N S-D7-18954 (F32)

23-Ton Spreader Bar

Miscellaneous Contents of Old Building

Engine Lift

Miller Trailpower 250D Gas Welder

1990 Broderson IC200 2B, 650 Hours, S/N 26501 (C15)

Counterweights & Booms

CAT T70D LP Forklift, 7,000-LB., S/N SKB2462 (F07)

CAT T70D LP Forklift, 8.000-LB., S/N 5KB2450 (F08B)

Miller Big 40 Diesel Welder

Yale Forklift, 14,000-LB., S/N P367626 (Scrap) (F14)

Winch & Cables

Beams & Plate

1996 Ford L8000 Tandem Axle Rollback Truck, 362,000 Miles, Model LNT9000, VIN 1FDZW82E9TVA32249

2000 Sterling Tandem Axle Tractor, Model AT9500, VIN 2FWYHXYB1AF25601, 282,000 Miles (TK022)

White Beavertail Lowboy Trailer w/ Winch

2005 Broderson IC200-3F Crane, LP, 2700 Hours, S/N 00141233 (C16)

1998 Link Belt HTC-8650 50-Ton Crane, S/N E918-8806 (Main Turntable Seal is Out) (C53)

1999 Ford F250 Diesel Pickup Truck, VIN 1FTNF20F1XEC83722, 284,000 Miles (PU257)

Taylor TC0-180 w/ Boom, S/N 26632 (F18)

CAT GC45KSWB-LP 10,000-LB. LP Forklift, 4,220 Hours, S/N AT8702872 (F10D)

2001 Ford F150 Pickup Truck, VIN 1FTRX18L91NB95883 (PU264)

2002 Terex T560 60-Ton Crane, S/N 12840 (C60)

2002 Terex T340XL 40-Ton Crane, S/N 12624 (C40)

2001 Sterling Boom Truck, Single Axle, 34,000-LB. Manitowoc Boom, Model 1770C, VIN 2FZAAKAK52AH62752 (TK018)

Terex T230 Crane Truck, 57,000 Miles, 7,500 hours, S/N 10338 (C30)

Tandem Axle Flatbed

Tri-Axle RGN Trailer

1999 Mack Tandem Axle Tractor, Model CH613, 95,000 miles, VIN 1M1AA14YXXW111377 (RYDER #1)

Beams in Yard & Miscellaneous Items

Fuel Tank

Miller Big Blue 402D Welder

CAT V80E 8,000-LB. Forklift, Gas, S/N 77X2373 (F08C)

CAT GC30K 6,000-LB. Forklift, LP, 6,007 Hours, S/N AT83D00791 (F06C)

(2) Miller Welders, H-Frame Press, Workbench, Tools, Air Compressor, etc.

Pro Series Car Lift

Job Boxes, Tool Cabinets, Contents of Workshop

Hot Water Pressure Washer

(2) Air Compressors

2008 Ford F150 Pickup Truck, VIN AFTRF12218KC10827 (PU265)

Crane Block, Tools, Plate on Mezzanine

Contents of Tool Cage

1999 Ford F350 w/ Aluminum Dump Bed, 180,000 Miles, VIN 1FDSF34L5XED36393 (PU258)

Chains on Rack, Ladders, Steel on Rack

Skates & Clevises

Clark C500Y-34 Forklift, 5,000-LB. Gas, S/N Y3552792530171 (F05B)

Sander, Vise, Mag Drill, Miller Welder, Torch Cart, (2) Welding Tables, & (3) Welders

Geka Minicrop Ironworker

Eye Bolts, Shackles, Welding Rod, Sockets, Bolt Bins, etc.

Band Saw

Geka Hydracrop 70/A

Miller Bobcat 225 Gas Welder

Contents Outside

2007 Ford F150 Pickup Truck, VIN 1FTRF12237NA73337 (PU263)

Miscellaneous Tools & Equipment in Shop, Wall-to-Wall & Floor-to-Ceiling

CAT T300 LP Forklift w/ Manual Boom, S/N 716363 (F30)

CAT T400 Gas Forklift (F40)

Taylor LP Forklift, 30,000-LB., 7,400 Hours, TC-300S, S/N S-D7-18954 (F32)

23-Ton Spreader Bar

Miscellaneous Contents of Old Building

Engine Lift

Miller Trailpower 250D Gas Welder

1990 Broderson IC200 2B, 650 Hours, S/N 26501 (C15)

Counterweights & Booms

CAT T70D LP Forklift, 7,000-LB., S/N SKB2462 (F07)

CAT T70D LP Forklift, 8.000-LB., S/N 5KB2450 (F08B)

Miller Big 40 Diesel Welder

Yale Forklift, 14,000-LB., S/N P367626 (Scrap) (F14)

Winch & Cables

Beams & Plate

1996 Ford L8000 Tandem Axle Rollback Truck, 362,000 Miles, Model LNT9000, VIN 1FDZW82E9TVA32249

2000 Sterling Tandem Axle Tractor, Model AT9500, VIN 2FWYHXYB1AF25601, 282,000 Miles (TK022)

White Beavertail Lowboy Trailer w/ Winch

2005 Broderson IC200-3F Crane, LP, 2700 Hours, S/N 00141233 (C16)

1998 Link Belt HTC-8650 50-Ton Crane, S/N E918-8806 (Main Turntable Seal is Out) (C53)

1999 Ford F250 Diesel Pickup Truck, VIN 1FTNF20F1XEC83722, 284,000 Miles (PU257)

Taylor TC0-180 w/ Boom, S/N 26632 (F18)

CAT GC45KSWB-LP 10,000-LB. LP Forklift, 4,220 Hours, S/N AT8702872 (F10D)

2001 Ford F150 Pickup Truck, VIN 1FTRX18L91NB95883 (PU264)

2002 Terex T560 60-Ton Crane, S/N 12840 (C60)

2002 Terex T340XL 40-Ton Crane, S/N 12624 (C40)

2001 Sterling Boom Truck, Single Axle, 34,000-LB. Manitowoc Boom, Model 1770C, VIN 2FZAAKAK52AH62752 (TK018)

Terex T230 Crane Truck, 57,000 Miles, 7,500 hours, S/N 10338 (C30)

Tandem Axle Flatbed

Tri-Axle RGN Trailer

1999 Mack Tandem Axle Tractor, Model CH613, 95,000 miles, VIN 1M1AA14YXXW111377 (RYDER #1)

Beams in Yard & Miscellaneous Items

Fuel Tank

Miller Big Blue 402D Welder

CAT V80E 8,000-LB. Forklift, Gas, S/N 77X2373 (F08C)

CAT GC30K 6,000-LB. Forklift, LP, 6,007 Hours, S/N AT83D00791 (F06C)

(2) Miller Welders, H-Frame Press, Workbench, Tools, Air Compressor, etc.

Pro Series Car Lift

Job Boxes, Tool Cabinets, Contents of Workshop

Hot Water Pressure Washer

(2) Air Compressors

2008 Ford F150 Pickup Truck, VIN AFTRF12218KC10827 (PU265)

Crane Block, Tools, Plate on Mezzanine

Contents of Tool Cage

1999 Ford F350 w/ Aluminum Dump Bed, 180,000 Miles, VIN 1FDSF34L5XED36393 (PU258)

Chains on Rack, Ladders, Steel on Rack

Skates & Clevises

Clark C500Y-34 Forklift, 5,000-LB. Gas, S/N Y3552792530171 (F05B)

Sander, Vise, Mag Drill, Miller Welder, Torch Cart, (2) Welding Tables, & (3) Welders

Geka Minicrop Ironworker

Eye Bolts, Shackles, Welding Rod, Sockets, Bolt Bins, etc.

Band Saw

Geka Hydracrop 70/A

Miller Bobcat 225 Gas Welder

Contents Outside

2007 Ford F150 Pickup Truck, VIN 1FTRF12237NA73337 (PU263)

Miscellaneous Tools & Equipment in Shop, Wall-to-Wall & Floor-to-Ceiling

Bower & Associates, Inc.

Sale Date(s)
Venue Address
Bower & Associates, Inc.
1702 Dutch Lane
Jeffersonville
Indiana
47130
United States

Last day for removal: Thursday, 2/29/2024.

RIGGER:
Knight Industrial Services
(502) 649-8835
brian.knight@knightindrig.com

Important Information

Webcast Auction begins 10AM ET. Register 24 hours prior to start of auction.

Owners Retiring After 34 Years in Business

Featuring: (4) Hydraulic Truck Cranes – TEREX T560, LINK-BELT HTC-8650, TEREX T340XL, TEREX T230, (4) BRODERSON IC200 & IC80 & IC70 Carry Deck Cranes (11) CATERPILLAR & TAYLOR Forklifts to 40,000# Capacity • TAYLOR THD300 30,000-LB. Capacity Forklift, 5,000 Hours • STERLING 17-ton Boom Truck FORD L9000 Rollback Truck MACK & STERLING Tractors RGN & Flatbed Trailers (5) FORD Pickup Trucks • Lots of Skates, Cables, Chains, and Rigging, Air Compressors, Miller Welders (2) GEKA Ironworkers H-Frame Press Shop Equipment

If you need additional information on equipment at this auction, contact Joe Oliver at Joe@MyronBowling.com or (513) 604-4958.

Inspection: Day prior to auction or by appointment 9AM - 4PM.

Last day for removal Thursday, 2/29/2024.

MBA webpage details   Video

 

RIGGING AND REMOVAL IS THE RESPONSIBILITY OF THE BUYER.


Call our office if you need help getting registered for the auction (513) 738-3311

BidSpotter Customer Service Support Department 

Have a question pertaining to the bidding process? 

Visit our Frequently Asked Questions!  

You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here

Customer Support Hours:

  • Monday – Friday, 8:00 AM ET – 8:00 PM ET

Email: support@bidspotter.com

Office: 253-858-6777 Toll Free: 866-597-2437

Frequently Asked Questions

 

Terms and Conditions

NOTICE:  All Bidders and other persons attending this sale agree that they have read and have full knowledge of these terms and agree to be bound thereby.


1.  IDENTIFICATION
– All purchasers are required to give full name and address at time of registration.

2.  DEPOSIT – Each Buyer will be required to make a deposit in cash or by certified check of 25 percent of the bid on each lot at the time of knockdown.  In default of such deposit, the lot may be put up again immediately and resold.

3.  TIME OF PAYMENT – All invoices must be paid in full by the sales conclusion.  Any other arrangements must be made with Auctioneer prior to bidding.  If not, the merchandise will be deemed abandoned and Buyer will lost any right, title or interest Buyer may have acquired and the merchandise shall revert and repossess to Auctioneer without further notice to Buyer and the transaction shall be null and void as to Buyer.

4.  REMOVAL – All purchases must be removed not later than the date specified in the auction Catalogue and/or announced at the sale time.  No lot can, on any account, be removed during the sale.  All goods are sold “Where Is”.  Removal shall be at the expense, risk and liability of the Buyer.  Purchases will be delivered only on presentation of paid bill.  Auctioneer shall not be responsible for goods not removed within the time allowed, but shall have the option to remove and store at the expense and risk of the Buyer any article purchased, but not paid for and removed within the time aforesaid.

Buyer understands and agrees that all items offered at auction are subject to U.S. international trade requirements and any items intended for subsequent export outside of the U.S. may be subject to export controls, sanctions or other international trade restrictions.  Buyer is responsible for compliance with such requirements including obtaining any export licenses or authorizations necessary for export of the items.

5.  MANNER OF PAYMENT – All payments must be made by cash, cashier’s check or company check with a bank letter of authorization guaranteeing funds to Myron Bowling Auctioneers.  All check for deposits and balances due shall be payable to the order of “Myron Bowling Auctioneers”.  All bills must be paid to representatives of the Auctioneer at the plant unless otherwise announced.  The full purchase price on all lots sold to the same Buyer must be paid within the time fixed and before removal of any goods.

6.  CONDITION OF ARTICLES SOLD – The Auctioneer shall not be responsible for the correct description, genuineness, authenticity of, or defect in any lot, and makes no warranty in connection therewith.  NO sale will be set aside nor allowance made on account of any incorrectness, error in commentary, cataloguing, or any imperfection not noted.  No deduction allowed on damages articles, all goods being exposed for public exhibition are purchased and accepted by Buyer “AS IS”, “WHERE IS” and “WITH ALL FAULTS”.  Auctioneer makes no warranties or guarantees whatsoever whether written, oral or implied as to quality, quantity, condition, usability, salability, weight, measurement, year, model, mechanical condition, performance or other specifications and without recourse.

7.  CLAIMS – No Claims will be allowed after removal of goods from premises.

8.  RESPONSIBILITY FOR NON-DELIVERY – Auctioneer shall not, in any event, be liable for non-delivery of such lot, storage or removal fees or costs, lien satisfaction or for any other matter or thing, to any Buyer of any lot, other than for the return to the Buyer of the deposit or sum paid on said lot, should the Buyer be entitled thereto.

9.  COMPLIANCE WITH TERMS OF SALE – In default of payment of bills in full within the time therein specified, the Auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages.  Lots not paid for and removed within the time allowed herein may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charges of re-sale, will be charged to the defaulting purchaser.

10. RISK TO PERSON AND PROPERTY – Persons attending during exhibition, sale or removal of goods assume all risks of damage of or loss to person and property and specifically release the Auctioneer from liability therefor.  Neither the Auctioneer nor his principal shall be liable by reason or any defect in or condition of the premises on which the sale is held.

11. ADDITION TO OR WITHDRAWAL FROM SALE – The Auctioneer reserves the right to alter the order of the sale, withdrawal from the sale any of the property listed or to sell at this sale property not listed, and also reserves the right to group one or more lots into one or more selling lots or to subdivide into two or more selling lots.  Whenever the best interest of the Seller will be served, the Auctioneer reserves the right to sell property listed, in bulk.

12. SALE BY ESTIMATED WEIGHT, COUNTY OR MEASURE – Where items are sold by estimated weight, count or measure, the Buyer will be billed for and required to pay for the estimated weight, count or measure.  If, upon delivery, any shortage exists, the Buyer will receive a refund at the rate of the purchase.  If there be an excess, the Buyer will be required to take and pay for such excess, at the rate of the purchase.

13. DISPUTE BETWEEN BIDDERS/BID INCREMENTS – If any dispute arises between two or more bidders, the Auctioneer may decide the same or put the lot up for sale again at once, or resell to the highest bidder.  Auctioneer may reject a nominal or fractional bid advance if, in his estimation, it proves injurious to the sale.  The Auctioneer’s decision shall be final and absolute.

14. RESERVE – The Auctioneer reserves the right to reject any and all bids.  On lots upon which there is a reserve, the Auctioneer shall have the right to bid on behalf of the Seller.

15. RECORDS – The record of sale kept by the Auctioneer and bookkeeper will be taken as final in the event of any dispute.

16. AGENCY – The Auctioneer is acting as agent only and is not responsible for the acts of its principals.

17. SALES TAX – All sales are subject to state and local taxes, unless a proper exemption certificate including tax exempt number is presented at the time of payment.

18. BUYER’S PREMIUM – The Auctioneer in its sole discretion may impose a Buyer’s Premium on any goods sold.  The Buyer’s Premium is a percentage that is added to the final purchase price of any items.

19. SHIPPING – All coolants, oil and fluids must be drained from all machinery and equipment prior to removal.  All of the above must be shipped in compliance with state and federal regulations.

20. INSURANCE – All Buyers, or the Buyer’s riggers, must provide the Auctioneer, Owner and Landlord a certificate of insurance in amounts acceptable to the above parties prior to removal of any machinery and equipment.

21. ADDITIONAL TERMS AND CONDITIONS – The Auctioneer may modify or supplement these terms and conditions of sale by language in the catalog available at the sale site or by announcement at the start of the sale.

See Full Terms And Conditions