Firman Dual Fuel 3300 Watt Portable Generator. Model WHO3342REV00. Gasoline/LP gas powered. Appears new to nearly new. See pictures for additional...

Crown Manual Pallet Jack. Used. Complete. Works as it should.

JET Metal Dust Collector. Model JDC-500. Electric, 115V. Appears lightly used. No major noticeable defects. Rolling unit.

200PSI Booster Pump Wash System. Lightly used. Complete set up. See pictures for additional details. All mounted on a Beco cart. Rolls well. Equip...

Magna Jointer. Model 4E. Electric, 115V. Used. Complete. Sitting on a dolly. Rolls well. See pictures.

Delta Rockwell Band Saw. Model unknown. Electric, 1ph, 115V. Used. Appears complete. Sitting on a dolly, rolls well. No major noticeable defects.

Delta Milwaukee Scroll Saw. Model unknown. Electric, 115V. Used. Appears complete. Sitting on a dolly, rolls fair. No major noticeable defects. Se...

Dewalt 13" Thickness Planer. Model DW735. Electric, 120V. Appears new to nearly new. Sitting on a rolling table w/ wheel lock. In great condition....

Shop Smith Lathe. Model 10ER. Electric, 115V. Appears lightly used. Complete. Comes with tooling and additional accessories, see pictures.

Jet 10" Band Saw Model# JWB-10 Serial# 15110374 Turns on. Has light. See pictures

Coffing 1 Ton Chain Hoist Model# EC2012 Single phase 120V/240V. Currently wired for 120V. Missing chain bucket. Consigner states it does work. Ni...

Snap On 7 Drawer Toolbox Model# KR-657A. Stainless top. Drawers and toolbox in working condition. No keys. See pictures.

Powermatic Table Saw w/ Table Extension. Model 66. Hydraulic driven, Used. Appears complete. See pictures.

Delta/CR Onsruc Inverted Router. Cat No. 43-275. Electric, 120V. Used. Air operated foot pedal control. Appears complete. Was not tested at our fa...

Air-Vac Systems Air Cleaner. Model M-25CFUV. Electric, 115V. Appears lightly used. No major noticeable defects. Appears complete. See pictures.

General Air Filtration System Model# 10-1000. Brand new in box. See pictures

General Air Filtration System Model# 10-1000. Brand new in box. See pictures

General Dust Collector W/ Dual Auto Switch Model# 10-030DAS M1. Brand new in box. See pictures

General Dust Collector W/ Dual Auto Switch Model# 10-030DAS M1. Brand new in box. See pictures

General Dust Collector W/ Dual Auto Switch Model# 10-030DAS M1. Brand new in box. See pictures

General Dust Collector W/ Dual Auto Switch Model# 10-030DAS M1. Brand new in box. See pictures

Akro-Mils Organizer Stand W/ Bins Heavy duty. Approx. 50 bins per side. See pictures

Akro-Mils Organizer Stand W/ Bins Heavy duty. Approx. 50 bins per side. See pictures

Snap-On 8-Drawer Rolling Tool Chest. Model KERP762B1PBO. Used. Stainless work top. Rolls well. Has foam in drawers. See pictures.

Snap-On 17-Drawer Portable Tool Chest. Model KRA2423PKG. Used. No keys. Has some minor defects. See pictures.

Miller Millermatic 350P Welder. Serial# LJ180592B. Stock# 907300. 200/230/460V. Portable unit. Welder was not tested at our facility. Working cond...

Miller CP 200 Welder W/ XR Wire Feeder. Serial# KD484228. Stock# 902930. Comes with extended reach feeder. Spool gun . 200/230/460V. 3 phase. See ...

Miller CP 302 DC Welder. Serial# LB174877. Stock# 903786. 3 Phase. 200/230/460V. No leads. See pictures. Was not tested at our facility.

Miller CP-250 TS DC Welder. Serial# KE633452. Stock# 903047. 200/230/460V. 3 Phase. No leads. See pictures. Was not tested at our facility.

Miller CP-250 TS DC Welder. Serial# KE633455. Stock# 903047. 200/230/460V. 3 Phase. No leads. See pictures. Was not tested at our facility.

Miller CP-250 TS DC Welder. Serial# KE633450. Stock# 903047. 200/230/460V. 3 Phase. Comes with ground lead/clamp. See pictures. Was not tested at ...

Lincoln Outback 145 Welder/Generator. 123.5 Hours showing. Motor appears to be seized. Unable to be started at our facility. 4750 Watt. Single pha...

Miller CP-302 Welder. Serial# JJ451400. Stock# 902931. 200/230/460V. 3 Phase. Comes with ground lead/clamp. Was not tested at our facility. See pi...

Skid Lot Miller Wire Feeders. (3) Miller S-22 wire feeders. (1) S-52E wire feeder. (1) Miller Optima remote pulsing pendant control.. See pictures...

Air Products Constant Potential DC Welder. Model# MW300TQ. Serial# HD696828. Working condition unknow. See pictures.

Craftsman Table Saw. Model 103.27270. Electric, 115/230V. Used. Appears complete. No major noticeable defects. Comes with a sled.

Shop Smith Lathe w/ Table Saw. Model 500. Voltage unknown, no spec tag found. Appears complete. Comes with parts list and accessories. See picture...

RBI Industries Scroll Saw Model# 220 VS. Serial# 36000. Nice clean piece. Appears new. See pictures.

Roughneck Air Operated Grease Pump 50:1 ratio. Fits drums 110lb-132lb. Appears new. See pictures.

Buckeye Vertical Air Compressor. Model K510822Z30V4. Electric, 1ph, 208-230V. Used. Appears complete. Exact capacity unknown. See pictures.

Speedair Horizontal Air Compressor.Model# 3Z893. Powered by a 25HP Lincoln 3 phase motor. Approximatly 60-80 Gallon. See pictures for spec plates....

W A Whitney-Corp 20 HP Hydraulic Unit. Model# 600-550. Serial# 600-550-38196. Powered by a 20HP Lincoln Motor. 230/460V. Was not tested at our fac...

Louisville Extension/Step Ladder. Model# FXC1208. Appears nearly new. See pictures.

Snap-On Classic 78 11 Drawer Tool Box.Comes with the key. Rolls well. Drawers are all still rolling smooth. In overall good condition.

General Table Saw. Model 350. Electric, 1ph, 220V. Used. Appears complete. Comes with a wooden table extension. See pictures.

I-T-E Enclosed Fusable Breaker Switch. Cat. No. F355-1. Type 1. 400Amp. 600V AC. Electric, 3ph, 480V. Appears to trip.

Steel Work Table w/ Large Drawer Used. Solid. Approx. 4' x 3'

Steel Welding Table. Used. Solid. Equipped with grate, shelving, and dust/fume collector hook-up. See pictures. Approx. 6' x 4'.

Clausing 6-Head Drill Press. Model SERIES 16ST drill press heads. Each powered by a Doerr 3ph, 208-220/440V motor. Used. Comes with an unmounted ...

Rouselle No. 6 Stamping Press. Model 6. Electric, Powered by a Westinghouse 5 HP 3 phase 208-220/440V motor. Used. Appears complete. Large unit. S...

Delta Shopmaster Countertop Drill Press. Model DP350. Electric, 1ph, 120V. Appears lightly used. Complete. See pictures.

Hyd-Mech Model S-20 Band Saw. Model# S-20. Has a lot of surface rust. Was not tested at our facility. Needs some TLC but still in solid condition....

Summit Industrial Lathe w/ Accessories. Model unknown. Hydraulic driven. Used. Appears complete. A large piece. 4-1/8" bore. See pictures.

(20) 48" Plastic Stretch Wrap Rolls. Skid Lot, selling all for one money. Clear.

(20) 48" Plastic Stretch Wrap Rolls. Skid Lot, selling all for one money. Clear.

Bridgeport Series II CNC Endmill. Appears to have been sitting outside. Acu-rite controls. 230V. 3 phase. See pictures. Working condition unknown.

Phase II End Mill Cutter/Sharpener Model# 235-001. Comes in wooden storage box. Appears complete. See pictures.

Grundfos 3 HP Jockey Pump W/ Motor Model# A96083080P215040001. Type: CR3-15 A-B-A-E-HQQE. Powered by a Baldor 3 HP motor. Cat. No. 84Z04053. 208-2...

(2) GE Mag-Break 400AMP Curcuit Breaker Cat No. SGLA36AI0400. 400amp. Max 600V 3 pole. Both breaker trip and reset properlly. Were not live tested...

(1) GE Hi-Break 400AMP Curcuit Breaker (1) Square D 110Amp Curcuit Breaker GE Breaker Specs: Cat No. SGHA36AT0400. Max 600V. 3 pole. Square D: KHB...