IMPORTANT: THIS IS A LIVE WEBCAST AUCTION. There will be no onsite bidding. Live Bidding will begin at 1:00 PM ET on December 13th, 2022.  ...[mo...

All rigging and removal will be handled exclusively by the following rigger. Please call for removal costs.  Green Giant TruckingBill Fick864-844-...

Darex Drill Sharpener, Dual Wheels, 1/3 HP, 3450 RPM, 115 v, 4.2 AMPS, 50 Hz, S/N 502653

Meteor CH 6 Drill & Tool Grinder, 110 v, S/N 161913 ...[more]

{ Group of lots: 3, 4, 5 } 6" Machine Vise

{ Group of lots: 3, 4, 5 } 6" Machine Vise

{ Group of lots: 3, 4, 5 } 6" Machine Vise

10" Walter Rt250TG Rotary Table, 10" Diameter, S/N 2788

12 1/2" Walter RtM 320 Rotary Table, 12.5" Diameter, S/N 2502 ...[more]

Haas HA2TS Dual Head Rotary Indexer with Haas Control & Tailstocks, S/N 700137A&B ...[more]

Hydro-Line Hydraulic Cylindar

General Electric 25BC 46AB 2286 Motor, 10 HP, 1000 RPM, 30 v, S/N KDC5657

Emerson Hevi-Duty Transformer, 480D High Voltage, 220Y/127 Low Voltage, 78.7 Amps, 3 ph, 60 Hz, Approximate Weight: 400 lbs. Item No. 044595ET00, ...

Lot of Assorted Lifting Chains and Cables

Starrett RGDC 4040-24 Coordinate Measuring Machine, 67.5" x 49.5" Granite Table, Renishaw PH10T Probe Head, Renishaw MCU lite-2 Controls, S/N SD-5...

36" x 32" Granite Surface Table, S/N SFP-004, With Mobile Table

Starrett Granite Surface Table, 36" x 24" x 5" Thick, With Cabinet

Darex E-85/90/TR Tool Sharpener, 1/4 HP, 3400 RPM, 115 v, 3.2 AMPS, 60 Hz, S/N 7039

Drill Bit Sharpener Attachment

DoAll 16-S.F.P. Vertical Band Saw, 16" Throat, 220 v, 3 ph, 60 Hz, S/N 79-571481 ...[more]

Sullair ES-6 Air Compressor, 10 HP, 460 v, 3 ph, 60 Hz, Hours: 5773.2, w/ (1) Sullair RN3 Dryer ...[more]

Baldor 1021WD Double-End Pedestal Grinder, 1.5 HP, 1800 RPM, 460 v, 3 ph, 60 Hz, S/N F889

Okamoto ACC-12.24ST Horizontal Surface Grinder, 12" x 24" Walker Electro-Magnetic Chuck, 12" x 2" Max. Wheel Size, 6500 SFPM, 460/3/60 Electrics, ...

Sharp LMV-42 Vertical Mill, 3 HP Motor, Power Feed, 1720 RPM, 440 v, 60 Hz, S/N 10331520, New 2012, w/ Acu-Rite Digital Readouts, ...[more]

Lot of Assorted Drill Bits

Lot of Assorted Carbide Cutters ...[more]

{ Group of lots: 25, 26, 27 } Lot of Assorted End Mill Cutters ...[more]

{ Group of lots: 25, 26, 27 } Lot of Assorted Keyway Cutters ...[more]

{ Group of lots: 25, 26, 27 } TG 150 Collets and Nuts ...[more]

Lot of Assorted Machine Tooling Consisting of: (2) Live Centers, (1) Center, and (1) Grinding Attachment

{ Group of lots: 29, 29A, 30 } 22" x 60" Birmingham YCL-2260 Precision Gap Bed Engine Lathe, 22" Swing Over Bed, 31" Swing In Gap, 60" Between Ce...

{ Group of lots: 29, 29A, 30 } 14” 4-Jaw Chuck ...[more]

{ Group of lots: 29, 29A, 30 } Shars 250-400 CNC Quick Change Tool Post

Valenite Sotting Cutters and Inserts ...[more]

{ Group of lots: 33, 34, 35 } Grinding Mandrels ...[more]

{ Group of lots: 33, 34, 35 } Misc. Collets ...[more]

{ Group of lots: 33, 34, 35 } Sandvik Insert Mills ...[more]

Doosan Lynx 220LC CNC Lathe, Doosan-Fanuc i CNC Control, 20.1" Max. Swing Over Bed, 21" Max. Turning Length, 2.625" Bar Capacity, 4000 RPM Max. Sp...

Toyoda Wele Stealth 1565 CNC Vertical Machining Center, Fanuc Series 0i-MD CNC Control, Travels: X-59.1”, Y-25.6”, Z-23.6”, Table Size 65" x 25.6"...

Doosan S310N CNC Lathe, Doosan-Fanuc CNC Control, 20.4" Swing, 18.9" Max. Turning Length, 10" 3-Jaw Chuck, 2.6" Bar Capacity, 20 HP Spindle Motor,...

Doosan S390L Lathe, Fanuc 21-T CNC Control, 22.8" Swing, 30" Max. Turning Length, 3" Bar Capacity, 3500 RPM, 20 HP Motor, Travels: X-7.68", Z-31",...

Doosan MV3016 Vertical Machining Center, Fanuc i-Series CNC Control, Travels: X-30.2”, Y-17.1”, Z-20.1”, Table Size: 36.2" x 17.1", 24 ATC, 8000 R...

Troyke DL-15-A Rotary Table S/N 6212-11

Doosan HP 5100/7APC CNC 4-Axis Horizontal Machining Center, Fanuc Series 31i-A CNC Control, Travels: X-33.5", Y-27.6", Z-29.5", With 19.7" x 19.7"...

{ Group of lots: 48, 49, 50, 51, 52, 53, 54, 55, 56 } Lot (6) Assorted Cat 40 Taper Tooling

{ Group of lots: 48, 49, 50, 51, 52, 53, 54, 55, 56 } Lot (6) Assorted Cat 40 Taper Tooling

{ Group of lots: 48, 49, 50, 51, 52, 53, 54, 55, 56 } Lot (6) Assorted Cat 40 Taper Tooling

{ Group of lots: 48, 49, 50, 51, 52, 53, 54, 55, 56 } Lot (6) Assorted Cat 40 Taper Tooling

{ Group of lots: 48, 49, 50, 51, 52, 53, 54, 55, 56 } Lot (6) Assorted Cat 40 Taper Tooling

{ Group of lots: 48, 49, 50, 51, 52, 53, 54, 55, 56 } Lot (6) Assorted Cat 40 Taper Tooling

{ Group of lots: 48, 49, 50, 51, 52, 53, 54, 55, 56 } Lot (6) Assorted Cat 40 Taper Tooling

{ Group of lots: 48, 49, 50, 51, 52, 53, 54, 55, 56 } Lot (9) Assorted Cat 40 Taper Tooling

{ Group of lots: 48, 49, 50, 51, 52, 53, 54, 55, 56 } Cat 40 Taper Tooling w/ Carbide End Mill Cutter

Lot of Assorted TG 100 Collets

Huot Toolscoot CAT 40 Taper Tool Cart ...[more]

{ Choice of lots: 58A } Huot Toolscoot CAT 40 Taper Tool Cart ...[more]

Muratec MT100 Twin Opposed Spindles CNC Turning Center, Muratec-Fanuc CNC Control, 8.66" Max. Turning Dia., 24.4" Max. Turning Length, Collet Chuc...

{ Group of lots: 60, 61 } Muratec MW120 Twin-Spindle CNC Turning Center, Muratec-Fanuc CNC Control, Twin Front-Facing Spindles, Twin 8-Position T...

{ Group of lots: 60, 61 } Muratec MW120 Metric Toolholders

{ Choice of lots: 62, 63 } Doosan Puma GT2600 Lathe, Fanuc i Series CNC Control, 18.1" Turning Diameter, 25.9" Turning Length, ATS Collet Chuck, ...