Featuring 2016 Tarus 5-Axis CNC Gun Drilling Machine, (6) Tarus CNC Gun Drilling Machines, Chieh Weh Engine Lathe, Toolroom Equipment, & Much More!
Auction closed
Timed auction

Auction dates

  • Ended Nov 14, 2023 2:11pm ET (7:11pm GMT)

Auction details

Currency: USD
Buyer's premium: 18.00%

Venue address

. Windsor, Ontario . Canada

Auction house

Add to favorites Ask a question phone_in_talk 631-249-5566

Refine your search

You’re currently pending approval by the auctioneer. In the meantime you can continue to place bids from the lot page which will be accepted once you’re approved.
57 item(s)
  • List
  • Grid
  • 57 item(s)
    /page

This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.

Tarus GDTTC510-6XRT CNC Gun Drill, Hope Industrial Systems CNC Control, 2" Maximum Drilling Diameter, 92" Stroke, Travels: X- 130", Y- 59", Z- 44"...

Tarus TPTCGD0408S CNC Gun Drill, Lemoine CNC Control, 2” Maximum Drilling Diameter, 3,500 RPM, 96” Stroke, Travels: X – 60”, Y – 60”, Z – 20” 60” ...

Tarus TPTCGD512S CNC Gun Drill, Tarus MBX-92 CNC Control, 2” Maximum Drilling Diameter, 8,000 RPM, 96” Stroke, Travels: X- 144”, Y- 61”, Z- 28”, 6...

Tarus TPTCGD512S CNC Gun Drill, Lemoine CNC Control, 2” Maximum Drilling Diameter, 8,000 RPM, 96” Stroke, Travels: X- 144”, Y- 62”, Z- 28”, 60” x ...

Tarus TPTCGD512 CNC Gun Drill, Tarus CNC Control, 2” Maximum Drilling Diameter, 84” Stroke, Travels: X – 144”, Y - 56”, Z – 22”, 60” x 144” Table ...

Tarus TPTCGD512 CNC Gun Drill, 2” Maximum Drilling Diameter, 84” Stroke, Travels: X – 144”, Y - 56”, Z – 22”, 60” x 144” Table Dimensions, CAT 50,...

Tarus TPEXHGD412 CNC Gun Drill, Lemoine CNC Control, 1.5” Maximum Drilling Diameter, 96” Stroke, Travels: X – 60”, Y – 48”, Z – 15”, 60” x 60” Tab...

Eumach LBM-2000 CNC Bridge Type Vertical Machining Center, Selca S4000 CNC Control, X- 86.68”, Y-68.95”, Z-25.61”, Spindle Speeds to 15,000 RPM, 1...

(8) Boxes of Assorted Gun Drill Tooling, Size .714, .872, .734, .793, ..631-.552, .788, .710, .237, .316 ...[more]

Heavy Duty Sine Plate, 36'' x 36'', 64 Drilled and Tapped Holes ...[more]

Heavy Duty Sine Plate, 36'' x 36'', 64 Drilled and Tapped Holes ...[more]

Set of Heavy Duty Angle Plates, 61 1/2'' (H) x 38 1/2'' (L) x 19 1/2'' (W), Slotted and Drilled Holes for Tie Downs ...[more]

Set of Heavy Duty Angle Plates, 36'' (H) x 24'' (L) x 10'' (W), with Drilled Holes for Tie Downs ...[more]

Lot 27

Fixture Plate

Fixture Plate, 36'' X 36'' X 2'' Thick, 289 Drilled And Tapped 3/4'' Holes ...[more]

Lot 28

Fixture Plate

Fixture Plate, 24'' X 24'' X 2'' Thick, 121 Driled And Tapped 3/4'' Holes ...[more]

Heavy Duty Machine V Block, 60'' (L) x 11'' (H) x 18'' (W) ...[more]

Heavy Duty Machine V Block, 55'' (L) x 5'' (H) x 10'' (W) ...[more]

(2) Machine V Blocks, (1) 30'' (L) x 3 1/2'' (H) x 5 1/2'' (W), (1) 15 1/2'' (L) x 4 1/2'' (H) x 6'' (W) ...[more]

First LC-1 1/2 VS Milling Machine, 42'' X 9'' T Slotted Table, T Slot (3 x 0.625'' x 2.5'', Travel 38'' Longitude, 12'' Cross Travel, 16'' Vertica...

Chien Yeh CY 405G Engine Lathe, 14'' Swing Over Bed, 36'' Between Centers, 2'' Spindle Bore, 8'' Chuck, SN 86209 [1986] ...[more]

RAM Horizontal Bandsaw, SN HL108627 ...[more]

Delta 28-190 12" Vertical Band Saw, 1/2 HP, RPM 1725, 115 VOLTS, 60 Hz, Amp 7.6, Single Phase, SN KC 9734 ...[more]

Ford Smith 41-P Double End Pedestal Grinder, 2 HP, 2.2 AMP, 1740 RPM, 550 Volts, 60 Hz, 3 Phase, SN NO33-1 ...[more]

Jones Shipman 310 Cutter / Tool Grinder, 3 Jaw Chuck, 1/2 HP, SN 39729 ...[more]

Norton #1 Cutter / Tool Grinder, SN 149497 ...[more]

Deckel Table Top Cutter / Tool Grinder, Max Collet Capacity 1'', Grinding Diameter 4'', Taper Angle 0 - 180 Degrees, Relief Angle 0 - 45 Degrees, ...

Mastercraft 55-5929-2 12" Bench Top Drill Press, Speeds 280-3000 RPM, 120 Volt Ac, 60 Hz, 6 Amp, Single Phase, SN W033751 ...[more]

Lot 41

6" Bench Vise

6" Bench Vise ...[more]

Joemars TR100 Portable Tap EDM Removal Machine, Auto Feed, Depth Setting, Auto Retract With Alarm, Input Power 3000w, Electrode Chuch Diameter 2-1...

Clark CGC 30 5500 Lbs Propane Forklift, 5500 Lbs Capacity , Side Shift, Type Lp, Solid Tires, Forks Are 4'' x 2'' x 48'' Long, Hours 1794, Mast Ty...

Kelton High Work Maintenance Platform Lift, 36'' x 36'' x 72'', 1000 Lbs Capacity ...[more]

(3) Steel Work Benches In Machine Shop Area, 72" x 32" x 34" ...[more]

(5) Steel Work Benches In Bay 1, 72" x 32" x 34" ...[more]

(10) Steel Work Benches In Bay 2, 72" x 32" x 34" ...[more]

Quantity Of Assorted Eyebolts On (1) Rack, Rack Included ...[more]

Quantity Of Assorted Eyebolts On (1) Rack, Rack Included ...[more]

Lot 52

(3) Ladders

(3) Ladders, (1) 8FT, (1) 6FT, & (1) 5FT ...[more]

Lot 53

(2) Ladders

(2) Ladders, (1) 8FT, (1) 6FT ...[more]

Lot 54

Banding Cart

Banding Cart with Tensioner and Crimpers ...[more]

(3) Wheelbarrows ...[more]

Loading...Loading...
  • 57 item(s)
    /page

Recently Viewed Lots