All Assets Have Been Relocated To Temperature Controlled Storage in Milwaukee

Refine your search

Estimate

Filter by Price Range

Category

You’re currently pending approval by the auctioneer. In the meantime you can continue to place bids from the lot page which will be accepted once you’re approved.
48 item(s)
  • List
  • Grid
  • 48 item(s)
    /page

This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.

Traub TNC 42-65 CNC Lathe, Max Turning Length 17.71", Diameter in Front Bearing 4.33", X Axis Slides S1 and S2 Feed Travel 5.51", Z Axis Slides S1...

Traub TNC 42-65 DGY CNC Lathe, Main and Sub Spindles, Upper and Lower Turrets, Chip Conveyor, Equipped with Traub TX 8H CNC Control, S/N 887 [2001...

Traub TNC 42/65 DGY CNC Lathe, Model , Main and Sub Spindles, Upper and Lower Turrets, Chip Conveyor, Equipped with Traub TX 8F CNC Control, S/N 7...

Traub TNC 42-65 DGY CNC Lathe, Main and Sub Spindles, Upper and Lower Turrets, Chip Conveyor, Equipped with Traub TX 8F CNC Control, S/N 555 [1997...

Traub TNC 42-65 CNC Lathe, Max Turning Length 17.71", Diameter in Front Bearing 4.33", X Axis Slides S1 and S2 Feed Travel 5.51", Z Axis Slides S1...

Traub TNC 42/65 DGY CNC Lathe, Main and Sub Spindles, Upper and Lower Turrets, Rear Exit Chip Conveyor, Equipped With Traub TX 8F CNC Control S/N ...

Traub TNC 42/65 DGY CNC Lathe, Traub TX 8F CNC Control, S/N 303 [1995] NOTE: MACHINE HAS BEEN RELOCATED TO A TEMPERATURE-CONTROLLED WAREHOUSE IN M...

Okuma LFS10-2SP Twin Spindle/Twin Turret CNC Turning Center, 15.7" Swing Over Bed, 4.72" Max Turning Diameter, 3.14" Max Turning Length, 1.57" Bar...

Okuma LFS10-2SP Twin Spindle/Twin Turret CNC Turning Center, 15.7" Swing Over Bed, 4.72" Max Turning Diameter, 3.14" Max Turning Length, 1.57" Bar...

Minster E2-1000-144 Hevi-Stamper Two Point Eccentric Shaft, Progressive Die Press, 1000 Ton, 144” x 60” Bed and Slide Area, 8” Stroke, 6” Slide Ad...

Cincinnati Avenger 250S CNC Slant Bed Turning Center, 12-Position Turret, Sub-Spindle, Acramatic 850SX CNC Control, Jorgensen Chip Conveyor, 460/3...

Automated Finishing Model 4078 Automatic Conveyor Parts Washer, 11" Conveyor Width, Approx 14"x 8" Parts Window, Wash and Blow-Off Cycles, Wash Ta...

Automated Finishing 2V5 Vibratory Finishing Machine, 36" x 12" x 16" 4-Section Vibratory Chamber, Pneumatic Actuated Door, Control Panel with Omro...

Automated Finishing Model 3905 Parts Washer, 25 "x 15" Parts Tray Loader, 30" x 18" Doorway, Pneumatic Actuated Door, Wash Tank with Watlow Electr...

Junker Jumat 5002/50 CBN CNC Shaft Grinding Machine, Fanuc Series 16 CNC Control, Automatic Loading Chain Cycle Conveyor, (2) HF Spindle Units, B-...

Junker Jumat 5002/50 CBN CNC Shaft Grinding Machine, Fanuc Series 16 CNC Control, Automatic Loading Chain Cycle Conveyor, (2) HF Spindle Units, B-...

Cole-Tuve Model CF-110 C-Frame Hydraulic Press, 110 Ton Capacity, .25"-11.8" Adjustable Stroke, 7.88" Max Shut Height, 19.6" Daylight (Max Opening...

DeHoff/ Kays Engineering 518T Gun Drilling Machine, 1/2" Diameter Mild Steel Drill Capacity, (2) Drill Heads, (4) Spindles, 18" Drill Stroke, 0.1-...

Mayfran ConSep 2000 Chip Conveyor with Coolant Tank & Pumps P51.04M6658.01, 90" x 34" Collection Area, 17' Span Before Neck, 20" Height Along Span...

Mayfran ConSep 2000 Chip Conveyor with Coolant Tank & Pumps P51.04M6658.01, 90" x 34" Collection Area, 17' Span Before Neck, 20" Height Along Span...

Koolant Koolers Model HCV 1500-PR Chiller Compressor NOTE: THIS MACHINE HAS BEEN RELOCATED TO A TEMPERATURE-CONTROLLED WAREHOUSE IN WAUKESHA, WISC...

Automated Finishing PW-24-S Parts Washer, Approx. 18" Wide Belt Parts Conveyor, Approx 10" x 18" Parts Window, Timer, AFS Industrial Air Cleaner, ...

Koolant Koolers Model HCV 1500-PR Chiller Compressor NOTE: THIS MACHINE HAS BEEN RELOCATED TO A TEMPERATURE-CONTROLLED WAREHOUSE IN WAUKESHA, WISC...

Shielded Drive Isolation Transformer 27 KVA NOTE: THIS MACHINE HAS BEEN RELOCATED TO A TEMPERATURE-CONTROLLED WAREHOUSE IN WAUKESHA, WISCONSIN LOA...

Brother TC-321 CNC Drilling & Tapping Center, Travels: X-27.55", Y-11.81", Z-9.84", 31.49" x 11.81" T-Slotted Table, 10-Position Tool Turret, 6-60...

Emag Reinecker VSC-250-DDS CNC Vertical Hard Turning and Finish Grinding Machine, 9.84" Max Chuck Diameter, 10.23" Max Swing, 3.46" X-Travel, 7.87...

Emag Reinecker VSC-250-DDS CNC Vertical Hard Turning and Finish Grinding Machine, 9.84" Max Chuck Diameter, 10.23" Max Swing, 3.46" X-Travel, 7.87...

Mitsui Seiki HU50A CNC Horizontal Machining Center, Fanuc Series 15-M CNC Control, Travels: X-28.34", Y-27.55", Z-25.6" Table to Spindle Range: 3....

Anderson Cook 350 Hydraulic Cold Roll Spline Roller, 56" Stroke, 48" Max Rack Length, 4.75" Max Rack Face Width, 2.5" Max Part Diameter, 16/32" Ma...

Sunnen KGM-5000NTE-S3 Horizontal CNC Honing Machine, 0.31-5.90" Workpiece Capacity, 4.4 LB Max Workpiece Weight, 250-3700 RPM/20-1000RPM Spindle S...

100" Mattison Type 100C 5-Spindle Rotary Surface Grinder, 100" Table Diameter, (5) 40 HP Spindles, 16" Range of Work with Fixtures, 20" Wheel Diam...

Hess-Mae M-AH-40RH-750 Automatic Shaft Straightening Press, 40-Ton Straightening Force, 29.5 Max. Width Between Centers, Infeed and Exit Conveyor,...

Hardinge Quest 8/51 CNC Lathe with Live Milling, 20.4" Swing, 12.1" Max. Turning Diameter, 7.4" X-Axis Travel, 24" Z-Axis Travel, 2.3" Spindle Thr...

Hardinge Conquest 51 CNC Lathe with Live Milling, Model CS-51, 26" Swing Over Ways, 6.75" X-Axis Travel, 22.87" Z- Axis Travel, 630 IPM Rapid Trav...

Hardinge Conquest 51 CNC Lathe with Live Milling, Model CS-51, 26" Swing Over Ways, 6.75" X-Axis Travel, 22.87" Z- Axis Travel, 630 IPM Rapid Trav...

LNS QLS80 S2 Quick Load Servo Barfeeder, 1/4" to 3-1/8" Bar Diameter, 14" to 63" Length Capacity, S/N 27325401 [2019] NOTE: THIS MACHINE HAS BEEN ...

Hardinge Conquest 51 CNC Lathe with Live Milling, Model CS-51, 26" Swing Over Ways, 6.75" X-Axis Travel, 22.87" Z- Axis Travel, 630 IPM Rapid Trav...

Lot 41

LNS Bar Feed

LNS Bar Feed NOTE: THIS MACHINE HAS BEEN RELOCATED TO A TEMPERATURE-CONTROLLED WAREHOUSE IN WAUKESHA, WISCONSIN LOADING CHARGE: $250 ...[more]

Mori Seiki SL303A/700 CNC Turning Center, Equipped with MSG501 CNC Controls, Mayfran Consep 2000 Chip Conveyor/ Coolant Reservoir Tank, S/N87, [20...

Mori Seiki SL303A/700 CNC Lathe, Mori-MSG501 CNC Controls, Mayfran Consep 2000 Chip Conveyor, S/N 871, [2001] NOTE: THIS MACHINE HAS BEEN RELOCATE...

Nordson NVC-4 Paint Booth, 60" x 60" x 60" Interior Cabinet, 3 HP Motor, 230/460V NOTE: THIS MACHINE HAS BEEN RELOCATED TO A TEMPERATURE-CONTROLLE...

CAE Ransohoff 4066 3-Stage Automatic Conveyor Parts Washer, 80 Pallets Per Hour, 0.5-5 FPM Conveyor Speed, 2060 Chain Conveyor Type, 13" x 10" Par...

Global Finishing Solutions Industrial Spray Booth, 104" x 60" x 120" H [2008] NOTE: THIS MACHINE HAS BEEN RELOCATED TO A TEMPERATURE-CONTROLLED WA...

ABB IRB 3000 General Purpose Robot, 66LB - 30K Load Capacity, 78" Reach, 6 Axis, Control NOTE: THIS MACHINE HAS BEEN RELOCATED TO A TEMPERATURE-CO...

Prawema SynchroFine HFSL203W High Performance CNC Gear Honing Machine, 40-160mm Workpiece Diameter Capacity, 55mm Max Teeth Width, 200mm Max Shaft...

Ravensburg 100" x 254" Manual Lathe with Crane Rope Drum Threading, 84" O/C, 63" 4-Jaw Chuck, 240 RPM, Crane Rope Threading, Copy Device, 19.8 Ton...

Makino a71 Horizontal Machining Center, 19.7” x 19.7” Tables, X-Axis Travel: 28.7″,  Y-Axis Travel: 28.7″,  Z-Axis Travel: 31.5″, 60 ATC, Cat 50 S...

Makino a71 Horizontal Machining Center, 19.7” x 19.7” Tables, X-Axis Travel: 28.7″,  Y-Axis Travel: 28.7″,  Z-Axis Travel: 31.5″,  60 ATC, Cat 50 ...

Loading...Loading...
  • 48 item(s)
    /page

Recently Viewed Lots