Refine your search
Category
- Machine Tools & Tools (66)
- Measuring & Testing Equipment (18)
- Warehouse Equipment (18)
- Machines (9)
- Industrial & commercial (7)
- Surface Treatment Machinery (5)
- EDM Electrical Discharge Machining (4)
- Handling & Packaging (3)
- Welders (3)
- Other Industrial Supplies & Equipment (2)
- Saws (2)
- Auto Parts & Accessories (1)
- Electrical Supplies (1)
- Motorcycles (1)
- Presses (1)
- List
- Grid
-
141 item(s)/page
This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.
BID QUICKLY. LOTS ARE STAGGERED TO END EVERY 60 SECONDS WHEN AUCTION BEGINS CLOSING AND WILL BE EXTENDED BY 7 MINUTES FROM TOP BID.
INVOICE AND PAYMENT
YOU WILL RECEIVE AN INVOICE AT THE END OF THE AUCTION BY END OF BUSINESS DAY FOR ANY ITEMS THAT YOU HAVE WON. IT WILL BE SENT TO THE EMAIL IN YOUR...
A $1,000.00 REFUNDABLE DEPOSIT IS REQUIRED FROM ALL BIDDERS WITHOUT SATISFACTORY POSITIVE BIDSPOTTER FEEDBACK AND SUFFICIENT PURCHASE HISTORY. THI...
REGISTRATION APPROVAL
BIDDER REGISTRATIONS ARE USUALLY APPROVED 48 HOURS PRIOR TO AUCTION. IF YOU HAVEN’T BEEN APPROVED BY THEN, FEEL FREE TO REACH OUT.
RIGGING AND REMOVAL INFORMATION
PICKUP / REMOVAL DATES & TIMES: 3/24 - 4/2/25. PICK UP IS BY APPOINTMENT ONLY, MONDAY-FRIDAY. ALL INFORMATION FOR PICK-UP WILL BE ON THE WINNERS E...
YOU MAY NEED TOOLS TO PICKUP YOUR ITEMS. WE DO NOT HAVE TOOLS AVAILABLE FOR DISASSEMBLY OF YOUR PURCHASES.
PAY ATTENTION TO ITEM LOCATION
ASSETS ARE LOCATED IN HUEYTOWN, AL. MAKE SURE TO CHECK ITEM LOCATION BEFORE BIDDING. FOR EXACT ADDRESS PLEASE REFER TO WINNERS EMAIL INVOICE.
BALDOR GRINDER BUFFER MODEL 812RE S/N X0511167059 MANUFACTURERS AND OUT OF STATE BUYERS HAVE A REDUCED TAX RATE OF 3.25% ...[more]
2017 TIMAC BELT SANDER / EDGE BEVELLER MODEL BSK250 S/N 817052877 MANUFACTURERS AND OUT OF STATE BUYERS HAVE A REDUCED TAX RATE OF 3.25% ...[...
RYOBI 10 INCH DRILL PRESS MODEL DP101 WITH CLARKE TOOLBOX S/N CO41510151 MANUFACTURERS AND OUT OF STATE BUYERS HAVE A REDUCED TAX RATE OF 3.25...
ROCKWELL/DELTA 20 INCH DRILL PRESS MODEL 70–6X0 S/N 1563649 SPECIFICATION: DRILLING CAPACITY, IN MILD STEEL: 1″ DIAMETER QUILL TAPER: #3 MT ...
BALDOR GRINDER BUFFER MODEL 1406 S/N F180 MANUFACTURERS AND OUT OF STATE BUYERS HAVE A REDUCED TAX RATE OF 3.25% ...[more]
JNA DRILL GRINDER AND SHARPENER
JNA DRILL GRINDER AND SHARPENER WITH CABINET AND TOOLING MANUFACTURERS AND OUT OF STATE BUYERS HAVE A REDUCED TAX RATE OF 3.25% ...[more]
KURT D688 6 INCH MACHINING VISE
KURT D688 6 INCH MACHINING VISE MANUFACTURERS AND OUT OF STATE BUYERS HAVE A REDUCED TAX RATE OF 3.25% ...[more]
KURT D688 6 INCH MACHINING VISE
KURT D688 6 INCH MACHINING VISE MANUFACTURERS AND OUT OF STATE BUYERS HAVE A REDUCED TAX RATE OF 3.25% ...[more]
KURT D688 6 INCH MACHINING VISE
KURT D688 6 INCH MACHINING VISE MANUFACTURERS AND OUT OF STATE BUYERS HAVE A REDUCED TAX RATE OF 3.25% ...[more]
KURT D688 6 INCH MACHINING VISE
KURT D688 6 INCH MACHINING VISE MANUFACTURERS AND OUT OF STATE BUYERS HAVE A REDUCED TAX RATE OF 3.25%. ...[more]
KURT D688 6 INCH MACHINING VISE
KURT D688 6 INCH MACHINING VISE MANUFACTURERS AND OUT OF STATE BUYERS HAVE A REDUCED TAX RATE OF 3.25% ...[more]
KURT D688 6 INCH MACHINING VISE
KURT D688 6 INCH MACHINING VISE MANUFACTURERS AND OUT OF STATE BUYERS HAVE A REDUCED TAX RATE OF 3.25% ...[more]
KURT D688 6 INCH MACHINING VISE
KURT D688 6 INCH MACHINING VISE MANUFACTURERS AND OUT OF STATE BUYERS HAVE A REDUCED TAX RATE OF 3.25% ...[more]
KURT D688 6 INCH MACHINING VISE
KURT D688 6 INCH MACHINING VISE MANUFACTURERS AND OUT OF STATE BUYERS HAVE A REDUCED TAX RATE OF 3.25% ...[more]
WORKHOLDING VISE 7 INCH
WORKHOLDING VISE 7 INCH MANUFACTURERS AND OUT OF STATE BUYERS HAVE A REDUCED TAX RATE OF 3.25% ...[more]
WORKHOLDING VISE 7 INCH
WORKHOLDING VISE 7 INCH MANUFACTURERS AND OUT OF STATE BUYERS HAVE A REDUCED TAX RATE OF 3.25% ...[more]
WORKHOLDING VISE 7 INCH
WORKHOLDING VISE 7 INCH MANUFACTURERS AND OUT OF STATE BUYERS HAVE A REDUCED TAX RATE OF 3.25% ...[more]
WORKHOLDING VISE 7 INCH
WORKHOLDING VISE 7 INCH MANUFACTURERS AND OUT OF STATE BUYERS HAVE A REDUCED TAX RATE OF 3.25% ...[more]
(3) VISES
(3) VISES MANUFACTURERS AND OUT OF STATE BUYERS HAVE A REDUCED TAX RATE OF 3.25% ...[more]
CHUCK JAWS, PIE JAWS
CHUCK JAWS, PIE JAWS MANUFACTURERS AND OUT OF STATE BUYERS HAVE A REDUCED TAX RATE OF 3.25% ...[more]
2014 MITSUBISHI CNC ELECTRICAL DISCHARGE MACHINE MODEL ED2500MR, EDM DRILL, HOLE POPPER MFG NO: 2507–1040 HOLE-DIA. (MIN) 0.012" HOLE-DIA. (MAX) ...
PARALLEL SETS
PARALLEL SETS MANUFACTURERS AND OUT OF STATE BUYERS HAVE A REDUCED TAX RATE OF 3.25% ...[more]
(3) CHUCKS, 10 AND 8 INCH
(3) CHUCKS, 10 AND 8 INCH, 10 INCH FOUR JAW CHUCK 8 INCH THREE JAW CHUCK 10 INCH JAW CHUCK MANUFACTURERS AND OUT OF STATE BUYERS HAVE A REDU...
15 INCH THREE JAW CHUCK
15" THREE JAW CHUCK MANUFACTURERS AND OUT OF STATE BUYERS HAVE A REDUCED TAX RATE OF 3.25% ...[more]
ROTARY TABLE INDEXER, 7 INCH
ROTARY TABLE INDEXER, 7 INCH MANUFACTURERS AND OUT OF STATE BUYERS HAVE A REDUCED TAX RATE OF 3.25% ...[more]
ANGLE PLATES
ANGLE PLATES MANUFACTURERS AND OUT OF STATE BUYERS HAVE A REDUCED TAX RATE OF 3.25% ...[more]
HYDRAULIC PRESS
HYDRAULIC PRESS MANUFACTURERS AND OUT OF STATE BUYERS HAVE A REDUCED TAX RATE OF 3.25% ...[more]
2006 CLEMCO BLAST CABINET MODEL 3048 INEX WITH 300 RECLAIMER AND BAG S/N 53828 WORKING CHAMBER SIZE 45-3/4" WIDE 27-3/4" DEEP 28" HIGH WINDO...
RAYTECH VIBRATORY PARTS TUMBLER
RAYTECH VIBRATORY PARTS TUMBLER MANUFACTURERS AND OUT OF STATE BUYERS HAVE A REDUCED TAX RATE OF 3.25% ...[more]
ALKOTA INDUSTRIAL HOT PRESSURE WASHER MODEL 420X4X S/N 237694 3.6 GPM 2000 PSI BELT DRIVE PUMP 5.0 HP 230V ELECTRIC MOTOR ELECTRIC OIL FIRED...
2013 MORI SEIKI NV5000A1B/40 CNC VERTICAL MACHINING CENTER, VMC, CHIPBLASTER JV40 COOLANT SYSTEM, MIST BLASTER SN: NV501130201 SPECIFICATIONS: ...
OXYGEN ACETYLENE CART WITH GAUGES AND TORCHES (TANKS NOT INCLUDED) MANUFACTURERS AND OUT OF STATE BUYERS HAVE A REDUCED TAX RATE OF 3.25% ...[...
HOBART TIGWAVE 250 AC/DC TIG WELDER (GAS TANK NOT INCLUDED) HOMEMADE CHILLER INCLUDED S/N 90WS14954 AMPS 250 VOLTAGE 230/460 PHASE 1 All sp...
LARGE LOT OF WELDING ACCESSORIES (WIRE, RODS, MASKS, TABLE, WELD POSITIONER, STARRETT VISE) WELDING WIRE WELDING GLOVES WELDING HELMETS TABLE ...
(2) DUMORE TOOL POST GRINDERS
(2) DUMORE TOOL POST GRINDERS MODELS 57-021, 57-130 MANUFACTURERS AND OUT OF STATE BUYERS HAVE A REDUCED TAX RATE OF 3.25% ...[more]
2022 VESPA SPRINT SPORT 50 VESPA SCOOTER, JUSTIN BIEBER EDITION VIN: ZAPCA06B9P5202379 THIS SCOOTER HAZ ZERO MILES AND HAS NEVER BEEN TITLED. HE...
KENNEDY TOOLBOX 15 DRAWER ROLLER TOOLBOX, CONTENTS NOT INCLUDED MANUFACTURERS AND OUT OF STATE BUYERS DO NOT HAVE SALES TAX EXEMPTION ...[more]
CRAFTSMAN TOOLBOX WITH STEEL 10 DRAWER ROLLER CART AND TWO CRAFTSMAN HAND TOOL BOXES, (CONTENTS SHOWN MAY CHANGE) MANUFACTURERS AND OUT OF STAT...
KENNEDY 5 DRAWER TOOLBOX
KENNEDY 5 DRAWER TOOLBOX (CONTENTS SHOWN MAY CHANGE) MANUFACTURERS AND OUT OF STATE BUYERS DO NOT HAVE SALES TAX EXEMPTION ...[more]
KENNEDY 5 DRAWER TOOLBOX
KENNEDY 5 DRAWER TOOLBOX (CONTENTS SHOWN MAY CHANGE) MANUFACTURERS AND OUT OF STATE BUYERS DO NOT HAVE SALES TAX EXEMPTION ...[more]
2017 OKUMA LB3000 EXII BIG BORE 1000MM CNC LATHE, TURNING CENTER SN: 203412 SPECIFICATIONS: TURNING DIAMETER: 23" TURNING LENGTH: 38" SLANT B...
JETPAK EXS-206 SEMI-AUTOMATIC STRAPPING MACHINE S/N 05020082 SPECIFICATIONS: STRAP WIDTH: 5-15MM (12MM STANDARD) SPEED: 2.5 SECONDS PER STRAP ...
STRAPPING CART WITH STRAPPING TOOLS MANUFACTURERS AND OUT OF STATE BUYERS DO NOT HAVE SALES TAX EXEMPTION ...[more]
BLACK & DECKER 7 TO 9 INCH ANGLE SANDER MODEL 4075 S/N 75383 MANUFACTURERS AND OUT OF STATE BUYERS HAVE A REDUCED TAX RATE OF 3.25% ...[more]
ANGLE GRINDER
ANGLE GRINDER MANUFACTURERS AND OUT OF STATE BUYERS HAVE A REDUCED TAX RATE OF 3.25% ...[more]
BLACK & DECKER 9 INCH HEAVY DUTY ANGLE SANDER MANUFACTURERS AND OUT OF STATE BUYERS HAVE A REDUCED TAX RATE OF 3.25% ...[more]
(2) DEWALT 4 1/2 INCH ANGLE GRINDERS MODELS DWE402, D28402 MANUFACTURERS AND OUT OF STATE BUYERS HAVE A REDUCED TAX RATE OF 3.25% ...[more]
MAKITA MODEL 9032 BELT SANDER AND BLACK & DECKER QUARTER INCH HEAVY DUTY DRILL MANUFACTURERS AND OUT OF STATE BUYERS HAVE A REDUCED TAX RATE OF...
MILWAUKEE HEAVY DUTY 1/2" DRILL 1660-1 MANUFACTURERS AND OUT OF STATE BUYERS HAVE A REDUCED TAX RATE OF 3.25% ...[more]
MILWAUKEE, HEAVY DUTY PORTABLE BANDSAW MODEL 6227 MANUFACTURERS AND OUT OF STATE BUYERS HAVE A REDUCED TAX RATE OF 3.25% ...[more]
2018 OKUMA LB3000 EXII BIG BORE 1000MM CNC LATHE, TURNING CENTER SN: 217247 SPECIFICATIONS: TURNING DIAMETER: 23" TURNING LENGTH: 38" SLANT B...
BLACK AND DECKER SKIL SAW
BLACK AND DECKER SKIL SAW MANUFACTURERS AND OUT OF STATE BUYERS HAVE A REDUCED TAX RATE OF 3.25% ...[more]
MILWAUKEE HEAVY DUTY 6" STRAIGHT GRINDER 5243 MANUFACTURERS AND OUT OF STATE BUYERS HAVE A REDUCED TAX RATE OF 3.25% ...[more]
Loading...-
141 item(s)/page