Ishida CCW-M-220W-D/30-PB 20 Head Computer Combination Weigher With: 20 head Dimple bucketsTeflon Coated Vibratory cone topWeighing capacity: ...

Cardwell VC1659 Vibratory Conveyor: Shaking table dimensions: Length: 180 inchesWidth: 17.5 inches Infeed Height:  26 inches Electrics: Volt...

Used Moline Sheeter with: Belt dimensions: Length: approximately 24 feetWidth: 24 inchesHeight: 36 inches 7 separating wheels 3 inches between...

Used Inline Filling System Automatic Capping System with: Current cap size: 24 mmVariable speed controlsCap feeder diameter: 24 inchesHopper dimen...

Used Langen Horizontal Glue Cartoner with Carton speed 20 to 120 cartons per minute (depending on carton size and application) Carton Sizes: M...

Used Texwrap TLS-2219 L-Bar Wrapper with:  Maximum Package Size: 9”H x 15.5”W x 19”L (standard) 7”H x 15.5”W x 19”L (with closing conveyor optio...

Used World Cup Filler with: Output: up to 45 cups per minuteNumber of stations: 8Container size range: 1 - 10 OuncesMaximum diameter: 3.18 inche...

Used Bossar B-3700 Horizontal Pouch FFS and Zipper with: Production output rate: 60-90 bags per minuteDual filling, sealing, and dischargeZipper a...

Used Accutek Inline Capper with: Number of spindles: 6Centrifugal orientation bowl Diameter:  Side gripper belt Height: 1 inchLength: 34 inche...

Used Hobart Mixer with: Capacity: 60 quarts2 horsepower motor1725 RPMStainless steel contact partsElectrical: 230 volts, 60 hz, phase 1 Skidding, ...

Used Hobart Mixer with: Capacity: 20 quart mixer(3) fixed speeds1/3 horsepower motor1725 RPMElectrical: 110 volts, 60 hz, phase 1 Skidding, Riggin...

Used Piston Filler with: Stainless steel constructionFoot pedal operated Skidding, Rigging, and Loading Fee: $100 ...[more]

Used Accutek Inkject Printer with: Automatic viscosity controlAutomatic ink bleed control825 millileter cartridge with automatic meterCharacter wi...

Used Accutek Induction Sealer with: Cap size: up to 120 millimetersStandalone induction sealer meant to be mounted over a conveyorStainless steel ...

Used Maurer * Sohne Smokehouse with: Two truckApproximate internal dimensions: Length: 84 inchesWidth: 44 inchesHeight: 80 inches Zesti Smoke Li...

Blentech SS Agitated Auger Feeder with: Blender capacity: 1500 gallons  Hopper infeed: Paddle agitation Outfeed 1 outfeed shaftLocated botto...

SS Trough Auger Conveyer: Stainless steel constructionOverall dimensions: Width: 65 inchesLength: 202 inchesHeight: 55 inches Trough dimensions:...

Used Auger Conveyor with: Belt drivenLength: 204 inchesAuger diameter: 15 inchesAuger shaft diameter: 5 inchesElectric motor and gear reducerStain...

Used Inclined Conveyor with: Cleated belt: Belt width: 24 inchesCleat centers: 30 inchesCleat width: VaryingApproximate length: 160 inches Disch...

Used Conveyor with: Plastic tabletop belt: Length: 192 inchesWidth: 24 inches Product guide railsElectric motor and gear reducerMounted on two l...

Used Pump  Skidding, Rigging, and Loading Fee: $110 ...[more]

Used Pump  Skidding, Rigging, and Loading Fee: $110 ...[more]

Used Loveshaw Case Taper with: Top & bottom tapeheads: 2 inchSide drive belts: Height: 2 inchesSpeed: 72 feet per minute Flap foldersCase capaci...

Used Inclined Conveyor with: Infeed height: 30 inchesPlastic mat top belt: Width: 24 inches Discharge height: 92 inchesOverall height: 95 inches...

Used Loveshaw Case Taper with: Top & bottom tapeheads: 2 inchSide drive belts: Height: 2 inchesSpeed: 72 feet per minute Flap foldersCase c...

Weiler SS Agitated Auger Feeder with: Stainless steel constructionBlender Dimensions: Width: 71.5 inchesLength: 60 inchesHeight: 70 inches Disch...

SS Table Top Scale: Digital  Skidding, Rigging, and Loading Fee; $30 ...[more]

Used Scale with: Western Scale M2000A indicator: Display: 6 digitsSpeed: Up to 100 samples per minuteElectrical requirements: Voltage: 110VF...

Used Triangle L 6P Vertical Form Fill and Seal Bagger with: Film roll diameter: 1.5 inchesSeal jaw length: 9.5 inchesPush button controlsMild stee...

Doughboy Band Sealer

Used TopFlex E-256 L Bar Sealer with:  Seal jaw dimensions: Length: 19 inchesWidth: 17 inches Conveyor dimensions:  Length: 31 inchesWidth: 15...

Used Signature Heat Shrink Tunnel with:  Aperture dimensions:  Length: 24 inchesWidth: 12 inches Conveyor dimensions:  Length: 52 inchesWidth:...

Used Mateer Packaging Head  with: No bowl No auger screw Skidding, Rigging, and Loading Fee $50 ...[more]

Used Mateer Packaging Head with: No bowl No auger screw Electrical Information 60 Hertz 230/460 Voltage 3 Phase 1/2 Horsepower Motor Skidding...

Used Neslab Refrigerated Recirculator with:  Electrical requirements: 115 volts, 60 hertz, 1 phase Skidding, Rigging, and Loading Fee: $35 ...[mo...

Used Pack-All Heat Shrink Tunnel with:  Aperture dimensions:  Length: 16 inchesHeight: 9.5 inches Tunnel length: 24 inchesConveyor dimensions:  ...

Used Little David Top and Bottom Case Taper with:  2 inch tape headConveyor width: 1 footElectrical requirements: 110 volts, 60 hertz, 1 phaseOver...

Used Retsan Packager Auger Filler with:  No bowlNo augerStainless steel constructionOverall dimensions:  Length: 46 inchesWidth: 40 inchesHeight...

Used Husky 60 Gallon Air Compressor with:  Tank size: 60 gallonsRated load speed: 3450Operating pressure: 125 to 155 psiMAWP: 175 psi @ 400°FMDMT:...

Used Eastey BB-2T Tape Machine with:  2 inch tape headBelt speed: 60 feet per minuteCase dimensions:  Maximum:  Length: unlimitedWidth: 21 i...

Used Interpack Carton Sealer with:  2 inch tape headBelt speed: 82 inches per minuteConveyor dimensions:  Length: 27 inchesWidth: 16 inches Cart...

Used Triangle L66C Vertical Form Fill and Seal with:  Speed: up to 50 bags per minuteSeal bar length: 14 inches8.5 inch cross sealElectrical requi...

Used Kaps-All 4 Spindle Capper with:  Speed: up to 80 bottles per minuteConveyor width: 4.5 inchesCap size range: 8 to 70 (millimeters) Stainless ...

Used Bartelt IM-714 Horizontal Form Fill and Seal with:  Production output rate: up to 70 pouches per minutePackge width: 6 inches14 stationsFilm ...

Used Bartelt IM-714 Horizontal Form Fill and Seal with:  Production output rate: up to 70 pouches per minutePackge width: 6 inches14 stationsFilm ...

Used Bartelt Horizontal Form Fill and Seal Frame Only with: Frame onlySeal jaw length: 9 inchesStainless steel componentsMild steel frameElectrica...

Used Alfa Laval Bowl Separator With: Max bowl speed: 5000 RPM Output: Up to 12,500 liters per hour Control cabinetElectrical: Volts: 480Freq...

Used Oystar TFS 10 Tube Filler and Sealer with: Infeed: 75.5 inches high  Infeed tank: Gallons: 10Diameter: 17.5 inches Discharge: 34 inches Dis...

Used Rejves four station snap capper with: Snap cap: 1.5 inchesInfeed/Discharge: 37 inches  Conveyor width: 3.25 inchProduction speed: up to 45 bo...

Used Kawasaki Robot Snap Capper with: Conveyor: Length: 10 feetWidth: 5.5 inches Infeed: 35 inchesDischarge: 35.5 inchCap size: 1.5 inchesMagazi...

Used Stahl T 50/4NA paper folding machine with:  Flat pile continuous feederMax sheet size: 560 mm long by 800 mm wideBatch counter Shingle delive...

Used Kallfass Universa 5050 automatic L bar sealer with: Speeds up to 30 cycles per minuteSealing frame dimensions: 20 inches x 20 inchesFilm: cen...

Used Horizontal Rollstock Thermoformer with:  Film roll diameter: 2 inchesDischarge conveyor dimensions:  Length: 5 feetWidth: 1 foot Last used ...

Used Lantech Side Sealer with:  Infeed dimensions:  Length: 3 feetWidth: 1 footHeight: 37 inches Film roll diameter: 2 inchesSeal jaw length: 8 ...

Used Kirk-Rudy KR950 Compensating Stacker with:  Minimum stock size: Length: 4.5 inchesWidth: 6 inches Maximum stock size: Length: 18 inchesWi...

Used 3M-Matic Top and Bottom Manual Case Taper with:  Output: up to 20 cases per minuteMinimum case dimensions: Length: 5.87 inchesWidth: 4.5 in...

Used 3M-Matic Top and Bottom Manual Case Taper with:  Output: up to 20 cases per minuteMinimum case dimensions: Length: 5.87 inchesWidth: 4.5 in...

Used Weldotron Heat Shrink Tunnel with:  Aperture dimensions:  Width: 22 inchesHeight: 14 inches Infeed height: 34 inchesTunnel length: 54 inche...

Used Shanklin Heat Shrink Tunnel with: Aperture dimensions:  Width: 18 inchesHeight: 12 inches Conveyor width: 11 inchesTunnel length: 32 inches...

Used Lantech SW-3000 Automatic Side Seal Shrink Wrapper:  Speed: up to 75 packages per minuteMaximum product dimensions:  Length: 40 inchesWidth...