Full Catalog Coming Soon! KDI BURNSLAKE SPECIALTY WOOD LTD.

TOO MUCH TO LIST ALL !!! THIS IS PARTIAL ONLY

REMAN PLANT

• COASTAL 7 HEAD PLANER, 6" X 12", W/ BRIDGE; S/N P-413-02-92; 50HP DRIVES; HYDRAULIC FEED ROLLS
• (2) 5 STRAND SECTIONS OF LANDING DECK, 11' X 12'L + 11'W X 6'L, W/ BOARD SINGULATOR & (5) 24” JUMP CHAINS
• STICK CONVEYOR BELT, 12" X 35'; 3HP
• 5 STRAND LUGGED CHAIN TRANSFER, 10'6" X 12'L, W/ 5 X 36" EVEN ENDING ROLLS
• 2 SAW OVERHEAD TRIM SAW, 1 FIXED, 1 ADJUSTABLE HEAD, 6 LUG CHAIN FEED, 5 JUMP CHAINS
• WAGNER MOISTURE METER
• BELT CONVEYOR, 12" X 20', W/ DRIVE
• 6 STRAND TRIM OUTFEED TRANSFER, 14' X 16'L, W/ CATWALK DECKING
• 6 ROLL PLANER INFEED, 5 PLAIN, 1 SPIRAL ROLL, 12" X 30" ROLLS, 2/ PINEAPPLE FEEDS
• HYDRAULIC POWER UNIT, (2) 30HP & (1) 50H DRIVE, THERMAL TRANSFER THERMAL TRANSFER
• HYDRAULIC POWER UNIT, 50HP DRIVE, THERMAL TRANSFER HEAT EXCHANGE
• LINDEN 12' 4 ARM STACKER, HYDRAULIC, 55" FEED & STACKING ARMS, W/ 4 RUN DECK
• OVERHEAD 40' RADIANT HEATER
• (2) CONTROL PANEL CONSOLES
• AIR MAKEUP UNIT, ON 10’H X 6’ X 8’ STEEL STAND
• COASTAL 36" DOUBLE ARBOR RIP SAW, W/ 4 SPIRAL ROLL INFEED; S/N LS0693
• NEWMAN 8' P.E.T. TRIM SAW; 2 LUG FEED CHAINS, EST 20HP ARBOR DRIVES
• PRECISION 18M LH CHOP SAW; 7.5HP; S/N 18-442
• MORE...

• PACKAGE PRESS & STRAPPING SYSTEM

  NEWNES PACKAGE END SQUEEZE PRESS, W/ 19 ROLLS X 20’L 4 RUN 12' LATERAL TRANSFER ACME HYDRAULIC METAL PACKAGE STRAPPER W/ INFEED ROLLS, MANUAL CORNER PLACING NEWNES OVERHEAD PACKAGE WRAP STATION W/ OPERATOR CONSOLE 2 RUN OUTFEED PACKAGE TRANSFER, 30" X 56', H78B CHAIN, 5HP 230/460V & FLENDER D100A5 REDUCER (2) 5HP HYDRAULIC POWER UNITS (9) BOXES BISSETT LB8014 GALVANIZED STAPLES SUPERIOR OVERHEAD INFRARED HEATER LAMINATED GLUE BEAM LINE MAJOR CUSTOM EDGE GLUE LINE, CUTTING EDGE TECHNOLOGY AND EXPERIENCE INTEGRATED INTO THIS EDGE GLUE SYSTEM PARTIALLY ASSEMBLED, W/ WITH ALL COMPONENTS, SPARES, PARTS, ETC. FOR TOTAL RE-ASSEMBLY & PRODUCTION FORMERLY OPERATED IN VAVENBY, BC CUSTOMIZED FOR PRODUCING 2X4 STUDS OR LONG LENGTH POLYURETHANE FINGER JOINTED STRUCTURAL WOOD PRODUCTS AND BEAMS, ESPECIALLY FROM 2” X 3” 7 ARM TRANSFER DECK, 55" ARMS, 35' LONG W/ (6) JUMP CHAINS (4) STRANDS W/ H78B CHAIN WOODS PLANER LINE WOODS 503M PLANER, 4 HEAD, 230/460V; 75HP DRIVES, 30HP FEED DRIVE 4 STRAND INFEED TRANSFER, 10' X 28'L; H78B CAMELBACK CHAIN PLANER INFEED, 9" X 55' W/ DRIVE PLANER OUTFEED BELT, 9" X 25', W/ DRIVE PLANER CONTROL & OPERATOR CONSOLE PLANER VARIABLE SPEED DRIVE HAMMOND 30KVA TRANSFORMER, 480-208/120V IES PLANER BRAKE 5 STRAND TRANSFER, 12' X 23'L; W/ GEAR DRIVE FINGER JOINTER SYSTEM WESTER PNEUMATIC FINGER JOINTER (CUSTOMIZED TO DOUBLE NORMAL THROUGHPUT) CAPABLE OF USING POLYURETHANE ADHESIVES, ALLOWING USE OF GREEN TRIM-ENDS CAN PRODUCE 2X3 BLANKS THAT CAN BE EDGE- GLUED OR FACE-GLUED INTO HIGHER VALUE ENGINEERED WOOD 29" X 11' BELT INFEED; 13" X 9' BELT CONVEYOR W/ CROSS-OVER BELT; 12" X 6' BELT CONVEYOR; CROSSOVER BELT W/ 15' METAL FEED TABLE; TRIM SAW #2; AUTO CORNER, GLUE SECTION W/ 30' BELT, FLAT CHAIN TRANSFERS; 48" PRESS ROLL SECTION; 9' CROWDER SECTION; FLY SAW WHEEL W/ UP ACTING JUMP CHOP SAW, MAX 30' CUT W/ (2) HOLD DOWN FEED ROLLS & PHOTO CELL; VFD CABINET FOR CROWDER, 50HP; 0-600V SPEEDCO CONTROL CABINET W/ (3) VFD’S: MAGNETEK GPD515, GPD 503 & DELTA VFD-B FINGER JOINTER HEADS (18) GLUE TOTE TANKS BLOCK INFEED: BLOCK BIN/PALLET 4 ARM TILT HOIST, 60" ARMS X 10'W; HYDRAULIC INCLINE BLOCK FEED CONVEYOR, 4' X 70' TO SORT TURNTABLE; W/ 10HP SURGE BIN W/ 4 STRAND 2 BAR TYPE UNSCRAMBLER, 8'W X 15'H DEL SCHNEIDER 10HP HYDRAULIC POWER UNIT WEINIG RONDAMAT 912 PROFILE GRINDER, MODIFIED FOR GRINDING FINGER JOINT HEADS TESTING EQUIPMENT: 2) 48" OVENS NATCO RT-2 PRESSURE VESSEL (2) HYDRAULIC FINGER JOINT BOARD STRESS TESTERS W/ ENERPAK POWER PACKS BLOCK TRIM & SORT SYSTEM RAIMANN MULTI-RIP SAW, W/ TRACTOR DRIVE FEEDWORKS WASTE CROSSOVER BELT CONVEYOR, 18" X 20' 2 HEAD RIP SAW SYSTEM ELEVATED BLOCK CONVEYOR TO FINGER JOINTER INFEED, 18" X 120' MAIN FLOOR WASTE BELT CONVEYOR, 18" X 80' DUMP BELT CONVEYOR, 36" X 75' W/ DRIVE 4 STRAND BAR TYPE UNSCRAMBLER, 7'W X 36'H W/ DRIVE ELEVATED MAIN BLOCK CONVEYOR INTO MILL, 30" X 213', W/ CATWALK RUCKER 20HP HYDRAULIC POWER UNIT, 575V CATWALK ABOVE WASTE CONVEYOR BLOCK PLANT PLC INCLINE WASTE CONVEYOR, 30" X 35' PALLET CONVEYOR BELT, 48" X 12', W/ DRIVE PALLET CONVEYOR BELT, 48" X 15', W/ DRIVE 3 STRAND PALLET TRANSFERS, 6' X 17'; 2 WAY DRIVES BLOCK SORT SYSTEM: (5) 12" X 150' BELT CONVEYORS RUNNING UNDER BLOCK SORT GRADE BELT, 18" X 15' GRADE BELT, 17" X 36' GRADE BELT, 30" X 20' CROSS BELT FROM MAIN INFEED, 12" X 6' BELT CONVEYOR, 12" X 6' TRIMMER OUTFEED HURRY-UP BELT LUGGED RIP SAW BELT, 18" X 40' TRIM SAW BELT, 18" X 43' TRIM SAW W/ 20' TRIMMER CHAIN TRANSFER CONTROL PANEL PHOTO CELLS OVERHEAD (6) CROSS FEED BELTS, 12" X 10' (2) CROSS FEED BELTS, 12" X 13' CROSS FEED BELT, 12" X 13’