Perfect Air-2 Tempering/Melter with 45-lb capacity with wheel and funnel, electric heat with digital thermostat and model HC-2 warming cabinet wit...

Hilliard Little Dipper Chocolate Melter 110 volts. serial#100432. Located Edison, NJ. Free loading. Skidding or crating is additional. ...[more]

Tinsley 100-lb Stainless Steel jacketed and agitated chocolate melter with electric heater and analog thermostat on casters set for 110 volts. Loc...

Smith 7" Enrober with 12-ft Cooling Tunnel. Enrober with water jacketed and heated tank, flow pan, blower, detailer, shaker. Cooling tunnel with 3...

Stokes 42" Stainless Steel Coating Pan - 26" diameter opening x 42" deep - 2-HP, 3 phas3, 60 cycle, 230 volt motor Located Edison, NJ - Loading is...

A&M Process Equipment Model TB36 150 Coating Pan - Never Used - 36" diameter x 40" deep - 10-1/2" opening - Stainless steel - 8 baffles - Solid dr...

47" diameter Stainless Steel Coating Pan with Baffles (NEW) - 24" diameter opening x 31" deep - (3) baffles - 3 HP, 3 phase, 60 cycle, 220 volt mo...

Kreuter type PBV 32" Topping Applicator for Sprinkles and Nuts - Stainless Steel Hopper with auger - Mounts over conveyor Located Suffern,...

Taffy Puller with 25-lb capacity, 110 volts. Located in Edison, NJ. Loading free. Skidding or crating is additional ...[more]

Savage #20 Gas Fired Candy Stove without kettle. Located in Edison, NJ. Loading free. Skidding or crating is additional

Krispy Kist Gas Fired Candy Stove without kettle. Top diameter 18” diameter. Located in Edison, NJ. Loading free. Skidding or crating is additional

Krispy Kist Gas Fired Candy Stove without kettle. Top diameter 18” diameter. Located in Edison, NJ. Loading free. Skidding or crating is additional

Savage model B kettle lifter with manual tilt controls, 6-ft tall mast on casters. Serial#223 built 2004. Located in Edison, NJ. Loading free. Ski...

Savage model B Kettle Lifter with motorized tilt (missing cable and controller for tilting) with 82” tall mast, 450 lb capacity, on wheels. Serial...

Hansella model 19H 6-ft Batch Roller (no heaters) with motorized lift,  set for 3 phase, 60 cycle, 220 volts. Located Edison, Loading free. Skiddi...

Hansella model 65D 4-stage rope sizer with electric heaters. #4, 3,2 sizing rollers (missing 4th roller) 3 phase, 60 cycle, 220 volts. Located Edi...

Rose Forgrove 6-ft Batch Roller with motorized lift, set for 3 phase, 60 cycle, 220 volts. Located in Edison, NJ. Loading free. Skidding or cratin...

Rose Forgrove 5-stage rope sizer with cluster sizing station with electric heaters, 5 sets of sizing wheels, speed controller set for 3 phase, 60 ...

Smith Batch Roller 6-ft with motorized raising and lowering with cover and control panel. Located Atlantic City, NJ. Machine is Crated. ...[more]

Nagema model EU4 Double Twist Wrapper - Two sets of size parts: 19 mm round and 17.5 x 14 mm - Vibratory feeder to feed plate - 3 phase, 60 cycle,...

NID model M111 18" Wire-Cut Candy Extruder - 4-ft long conveyor belt - 2 dies - 1 HP, 3 phase, 60 cycle, 220 volts Located Suffern, NY

(2) Spray Dynamics 100 Gallon Stainless Steel Jacketed Mixing Tanks - Each tank Equipped with the following features: - Electrically heated with t...

Cretors FT200 200 lb/hr Continuous Dry Popper - Natural gas fired - 120,000 btu/hr - Serial#91031063 - Control panel with motor starter and temper...

North bend model KCPM120G 160-qt Stainless Steel Kettle Corn Popping Machine, 100,000 btu/hr at 5 psi, gas fired and hand tilt with electric agita...

Champion model 65S 18" Wire-Cut Depositor - Variable speed for 90 to 1200 dozen cookies per hour - Pan guide adjustable 17" to 19" pans - 115 volt...

Patterson Kelley 5 Cu Ft Stainless Steel V-Blender - (2) 14" diameter feed ports with covers - 6" diameter discharge with butterfly valve - 3 HP, ...

Patterson Kelley Stainless Steel 8 quart V-Blender - 140 lb/cuft - Drive for liquid/solid bar but without bar - Covers - 110 volts - Serial#C03595...

Continental Can model D3 Can Seamer set on 603 diameter - Atmospheric seamer - Infeed conveyor - Lid magazine - 220/440 volt motor Located Edison,...

Elgin Single Piston Fudge Filler - SS Jacketed and Heated Hopper - approx. 27 ounce pistons, Indexing Conveyor Located Atlantic City, NJ - Loading...

Elgin Single Piston Fudge Filler - SS Jacketed and Heated Hopper - Approx. 27 ounce pistons, Indexing Conveyor Located Atlantic City, NJ - Loading...

Walker PZ-K 50 Gallon Stainless Steel Jacketed & Agitated Processing Tank - Double action sweep agitator with disperser - 27" diameter x 28" deep ...

Damark model SMC 2228 L-Bar Sealer - 22" x 28" sealing area - Timers and controls - Take away belt conveyor - 110/220 volts - Serial#5920 Loc...

Meyer 11-ft Tall Z-configuration Bucket Elevator - Model PA-452-9R-S, ser#5291 - 2-ft infeed and 2-ft discharge - Dump height approximately ...

Smalley Pack-off Conveyor with Turntable - 14" wide x 60" long inclined cleated conveyor - 2-ft flat infeed section - 44” diamet...

Thiele model 34-000 4-Head Rotary Placer with Nordson Hot Melt - Nordson Proble 4 hot melt unit - Vacuum pump - Serial#60412 - 3 phase, 60 cyc...

Universal model R310 Table Top Labeler for round containers - Adjustable product holding carriage .375" to 6" diameter - Photoelectric label senso...

Nerak Z-Configuration Bucket Elevator - Model 1237 - 16 ft tall discharge (overall height 18.4 ft) - 6 ft infeed section - 2 ft discharge section ...

Conveyor belt 4.5” wide x 9-ft long with plastic flat top chain conveyor with 31” tall legs with dc motor and 110 volt variable speed controller. ...

Conveyor with 3.5” wide x 54” long rubber belt conveyor without legs with motor. Located in Edison, NJ. Loading free. Skidding or crating is addit...

Conveyor 6” wide x 60” long white rubber bel conveyor 29” tall with 1/3-HP, 3 phase, 60 cycle, 230/460 volt motor with motor starter. Located in E...

Morse model 80PAPS 800 lb capacity drum carrier and dumper serial#1215-009 on wheels. Located in Edison, NJ. Loading free. Skidding or crating is ...