38
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
Accept Cookies Learn MoreLot
38
26" wide x 31.5" tall x 31" deep
Make: micro-trap
Works, Just needs on and off switch
Micro trip motor: model is WSC56B17D5714A, 1 1/2 HP, 115 V, 60HZ
Removal Procedures, Terms and Conditions
The following are the Removal Procedures, Terms and Conditions that all BTD Industries Inc. Auction Group buyers will adhere to for the removal of all purchases on our sites:
1. No items can be removed until payment is received IN FULL by BTD Industries Inc. Auction Group. You must have a PAID IN FULL invoice before any removal can begin – NO EXCEPTIONS.
2. No items can be removed during the auction.
3. Buyers are required to ensure the removal of their purchased items safely and within the deadline outlined for that sale. Failure to do so can result in fines and/or abandonment of lots with no further recourse.
4. All items removed must be verified by signature on our site invoice by the buyer or a representative.
5. BTD Industries Inc. associates are not required to prep, move, load or pack your items. Please come prepared. If you require a quote for packing/palletizing etc. please contact: Ryon Day at (226)-234-7800 or email: ryon@btdindustries.ca
6. Valid insurance coverage evidencing at least $5,000,000 including workers compensation is required to be provided to BTD Industries Inc. by any Riggers prior to them beginning work onsite.
7. As a courtesy to our buyers we often provide contact for Riggers that have worked on our sites before. BTD Industries Inc. Auction Group is in no way responsible for any damages or issues incurred by such companies.
8. We ask all our Buyers and Riggers to always maintain a safe and professional work environment and leave work areas clean upon completion removal.
9. Removal times are typically weekdays between 8am and 4pm but will be posted ahead of each individual sale.
10. Coordinating the removal of all items purchased and all associated costs are solely the responsibility of the buyer.
11. If applicable, items must be safely and properly disconnected from electrical, gas, water and/or air lines by a licensed professional, conforming to all safety and professional standards/codes. Any floor bolts must be sheared flush to the floor. Safety barriers must be erected around existing pits or holes in the floor. Any existing holes in roof, walls or floor must be properly and safely capped with appropriate material and weather sealant. Any property damage caused by removal must be repaired. The work area is required to be left in a clean and orderly condition with no debris remaining. Removal must be conducted safely under the supervision of the Auctioneers staff members (if applicable) or another premises representative. Any unsafe removal work will be stopped immediately at the Buyer’s expense.
DATES
Location
Inspection:
Any questions about the auction please call BTD Industries at +1 (519) 448-4141 or email us at sales@btdindustries.ca
Auction date: Starts May the 16th and ends June 17th
Auction starting time: 12:00 pm eastern
Pick up location: There will be multiple locations, make sure to check pickup location on invoice.
The locations are:
Payment in full deadline: Friday June the 9th
Pick up deadline: June 21th 2023
-Some lots in this auction carry a LOT LOADING FEE, see specific lots for details. Seller will ONLY load on to APPROPRIATE Trailers.
-All items must be paid for before pick up. We do not accept payments on site. Payments for won lots are to be paid by credit card, e-transfer unless purchase is over you e-transfer limit or item is more than $10,000 Canadian. We accept wire or EFT. Crate, skidding, packaging services are available, please email for a quote at sales@btdindustries.ca
=====================================================
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: 253-858-6777 Toll Free: 866-597-2437
BTD Industries Inc
PLEASE READ!!!!
All bidders participating in the auction shall be bound by the following terms & conditions.
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
26" wide x 31.5" tall x 31" deep
Make: micro-trap
Works, Just needs on and off switch
Micro trip motor: model is WSC56B17D5714A, 1 1/2 HP, 115 V, 60HZ
General delivery information available from the auctioneer
Removal Procedures, Terms and Conditions
The following are the Removal Procedures, Terms and Conditions that all BTD Industries Inc. Auction Group buyers will adhere to for the removal of all purchases on our sites:
1. No items can be removed until payment is received IN FULL by BTD Industries Inc. Auction Group. You must have a PAID IN FULL invoice before any removal can begin – NO EXCEPTIONS.
2. No items can be removed during the auction.
3. Buyers are required to ensure the removal of their purchased items safely and within the deadline outlined for that sale. Failure to do so can result in fines and/or abandonment of lots with no further recourse.
4. All items removed must be verified by signature on our site invoice by the buyer or a representative.
5. BTD Industries Inc. associates are not required to prep, move, load or pack your items. Please come prepared. If you require a quote for packing/palletizing etc. please contact: Ryon Day at (226)-234-7800 or email: ryon@btdindustries.ca
6. Valid insurance coverage evidencing at least $5,000,000 including workers compensation is required to be provided to BTD Industries Inc. by any Riggers prior to them beginning work onsite.
7. As a courtesy to our buyers we often provide contact for Riggers that have worked on our sites before. BTD Industries Inc. Auction Group is in no way responsible for any damages or issues incurred by such companies.
8. We ask all our Buyers and Riggers to always maintain a safe and professional work environment and leave work areas clean upon completion removal.
9. Removal times are typically weekdays between 8am and 4pm but will be posted ahead of each individual sale.
10. Coordinating the removal of all items purchased and all associated costs are solely the responsibility of the buyer.
11. If applicable, items must be safely and properly disconnected from electrical, gas, water and/or air lines by a licensed professional, conforming to all safety and professional standards/codes. Any floor bolts must be sheared flush to the floor. Safety barriers must be erected around existing pits or holes in the floor. Any existing holes in roof, walls or floor must be properly and safely capped with appropriate material and weather sealant. Any property damage caused by removal must be repaired. The work area is required to be left in a clean and orderly condition with no debris remaining. Removal must be conducted safely under the supervision of the Auctioneers staff members (if applicable) or another premises representative. Any unsafe removal work will be stopped immediately at the Buyer’s expense.
DATES
Location
Inspection:
Any questions about the auction please call BTD Industries at +1 (519) 448-4141 or email us at sales@btdindustries.ca
Auction date: Starts May the 16th and ends June 17th
Auction starting time: 12:00 pm eastern
Pick up location: There will be multiple locations, make sure to check pickup location on invoice.
The locations are:
Payment in full deadline: Friday June the 9th
Pick up deadline: June 21th 2023
-Some lots in this auction carry a LOT LOADING FEE, see specific lots for details. Seller will ONLY load on to APPROPRIATE Trailers.
-All items must be paid for before pick up. We do not accept payments on site. Payments for won lots are to be paid by credit card, e-transfer unless purchase is over you e-transfer limit or item is more than $10,000 Canadian. We accept wire or EFT. Crate, skidding, packaging services are available, please email for a quote at sales@btdindustries.ca
=====================================================
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: 253-858-6777 Toll Free: 866-597-2437
BTD Industries Inc
PLEASE READ!!!!
All bidders participating in the auction shall be bound by the following terms & conditions.