Conagra Brands Online Auction Tuesday, June 27th - Multiple locations including Ohio, Nebraska, Missouri and Kentucky 250 lots sold to the highe...

Adco Cartoner, model 91AL-30EC, s/n 3769HG, right to left, 11 x 5 x 3 1/2 in deep trays, Nordson ProBlue 7 hot glue applicator, AB Panelview plus ...

Durable Packaging case taper, model RA-4FC-1S, s/n 051697, up to 22 in wide, with power roller infeed conveyor, rubber belt outfeed conveyor. ** R...

Conveyors Plus empty box discharge conveyor, 96 x 14 x 48 in tall, SS frame, electric motor and drive, ** Rigging Fee: $525 ** (Located in: Louisv...

ABC case erector, model 112, s/n 22329. ** Rigging Fee: $775 ** (Located in: Louisville, KY)

Donaldson Torit dust collector, model DFO 2-4, 4 cartridges, 50 x 50 x 120 in tall. ** Rigging Fee: $450 ** (Located in: Louisville, KY)

2008 Chester Jensen SS jacketed cooking / cooling kettle, model 70N10, s/n 0811-P, 60 in dia x 15 in tall side, cone bottom, dual motion agitator,...

Misc. insulated SS ductwork. (LOT) ** Rigging Fee: $450 ** (Located in: Louisville, KY)

Air Pro SS blower and motor, size IEFB173-60, s/n 17420, 10 hp motor. ** Rigging Fee: $421 ** (Located in: Louisville, KY)

Air blower, motor, mild steel frame. ** Rigging Fee: $750 ** (Located in: Louisville, KY)

Bohn refrigeration compressor with 2-fan condenser with Howe ice flaker, model 76-R-1-RL-25S-S, 7.5 tons per day, with holding bin, 90 x 48 x 101 ...

KeepRite refrigeration compressor with 4-fan condenser, KVD070H8-HT4X-A3CC85, s/n 112403715, air cooled condenser, 200 x 88 x 54 in tall with Evap...

Mokon heater, model DT4009AAM, s/n 7014017. ** Rigging Fee: $275 ** (Located in: Louisville, KY)

Mokon heater, model DT4009AAM, s/n 7014018. ** Rigging Fee: $275 ** (Located in: Louisville, KY)

2015 Cozzini SS incline block cheese conveyor, model CBC-1, 240 x 12 in wide. 22 in load height, 100 in discharge height, SEW motor and drive, sta...

2015 Cozzini SS incline shredded cheese conveyor, model CBC-4, 175 x 12 in wide, 60 in load height, 172 in discharge height, SEW motor and drive, ...

2015 Cozzini bi-directional conveyor, model CBC-5, 80 x 12 in wide belt, runs left and right to feed stuffers. Mounted on ped 150 in tall. ** Rigg...

Reiser SS waterwheel, model MHC, s/n 060, with 10 in wide die, (10) 1 inch extruding holes, 10 in wide guillotine, on wheels. ** Rigging Fee: $325...

Reiser SS waterwheel, model MHC, s/n 059, with 10 in wide die, (10) 1 inch extruding holes, 10 in wide guillotine, on wheels. ** Rigging Fee: $325...

SS 2-belt conveyor, each belt 147 x 17 in wide, SS electric motor and drive. ** Rigging Fee: $325 ** (Located in: Louisville, KY)

SS rolling 3 step platform, 28 x 92 x 28 in tall, with railing, poly grate decking, on wheels. ** Rigging Fee: $250 ** (Located in: Louisville, KY)

SS rolling 4 step platform, 32 x 38 x 58 in tall, with railing, poly grate decking, on wheels. ** Rigging Fee: $250 ** (Located in: Louisville, KY)

Clear coat mixing skid including: Breddo Likwifier, model LDT, 60 gal. capacity, 15 hp, single shell; Cherry Burrel jacketed holidng mix tank, s/n...

SS wire mesh belt conveyor, 15 ft x 34 in wide, hydraulic driven, on track wheels. ** Rigging Fee: $325 ** (Located in: Louisville, KY)

Stein SS waterfall batter applicator with 34 in wide wire mesh belt, pump, hydraulic drive. ** Rigging Fee: $325 ** (Located in: Louisville, KY)

Stein breading applicator, 108 x 34 in wide wire mesh belt, hydraulic driven, with augers. ** Rigging Fee: $325 ** (Located in: Louisville, KY)

Stein SS waterfall batter applicator with 34 in wide wire mesh belt, pump, hydraulic drive. ** Rigging Fee: $325 ** (Located in: Louisville, KY)

Stein breading applicator, 108 x 34 in wide wire mesh belt, hydraulic driven, with augers. ** Rigging Fee: $325 ** (Located in: Louisville, KY)

Stein SS waterfall batter applicator with 34 in wide wire mesh belt, pump, hydraulic drive. ** Rigging Fee: $325 ** (Located in: Louisville, KY)

Stein breading applicator, 108 x 34 in wide wire mesh belt, hydraulic driven, with augers. ** Rigging Fee: $325 ** (Located in: Louisville, KY)

SS wire mesh incline conveyor, 40 x 12 in wide wire mesh belt, with hopper, hydraulic drive, on wheels. ** Rigging Fee: $325 ** (Located in: Louis...

SS wire mesh incline conveyor, 40 x 12 in wide wire mesh belt, with hopper, hydraulic drive, on wheels. ** Rigging Fee: $325 ** (Located in: Louis...

SS wire mesh incline conveyor, 40 x 12 in wide wire mesh belt, with hopper, hydraulic drive, on wheels. ** Rigging Fee: $325 ** (Located in: Louis...

1999 Stein batter mixer, model ABC-III, s/n 075-01-1298, with batter heated tank, feed, agitator, (1) 2015 SPX 030 U1 pd pump, (1) 2015 SPX 015 U1...

1999 Stein batter mixer, model ABC-III, with batter heated tank, feed, agitator, (1) 2015 SPX 030 U1 pd pump, (1) 2015 SPX 015 U1 pd pump, control...

1999 Stein batter mixer, model ABC-III, with batter heated tank, feed, agitator, (1) 2015 SPX 030 U1 pd pump, (1) 2015 SPX 015 U1 pd pump, control...

2015 General Oil Equipment stainless steel VPLS Spray System, clear coat applicator, model OSM-700-BBP-034-084, s/n GOE-15-09-524166-01, 78 x 34 i...

SS wire mesh belt conveyor 102 x 34 in wide, hydraulic drive, on track wheels. ** Rigging Fee: $325 ** (Located in: Louisville, KY)

SS wire mesh belt conveyor, 102 x 34 in wide, hydraulic drive, on track wheels. ** Rigging Fee: $325 ** (Located in: Louisville, KY)

SPX stainless steel centrifugal pump, model C114, with 1 hp SS motor. ** Rigging Fee: $125 ** (Located in: Louisville, KY)

Stein TFF-II THERMoFIN Fryer, model TFF3423, 36 in wide x 26 feet long, all SS construction with hood, raise/lower conveyor, with Kidde CO2 fire s...

Stein SS oil fines separator / oil filter, with screen belt, discharge, pump and controls. ** Rigging Fee: $325 ** (Located in: Louisville, KY)

SS wire mesh belt conveyor 80 x 34 in., hydraulic drive, on track wheels. ** Rigging Fee: $325 ** (Located in: Louisville, KY)

Keenline SS 180 degree conveyor, 8 in blue Interlox chain, electric motor and drive. (2) skids. ** Rigging Fee: $375 ** (Located in: Louisville, K...

SS flighted incline conveyor, electric motor and drive. ** Rigging Fee: $475 ** (Located in: Louisville, KY)

BMI stainless steel S-curve conveyor with (2) 45 degree turns, plastic belt, approx 12 in wide, x 24 feet long, electric mtoor and drive, suspende...

2015 Safeline metal detector, model SL2000, s/n 9119701, opening 12 x 5 in. tall, with conveyor 55 x 10 in. wide., motor and drive, reject. ** Rig...

2015 Continental Hydraulics tank and pump, model SR160-70/460V-A E103820, 160 gal tank, 40 hp motor. (ran conveyors and pumps in bread/batter room...

2015 Continental Hydraulics tank with (2) 40 hp pumps, model SR330-140/460V-A*, 330 gal. tank. Cooler on roof. ** Rigging Fee: $325 ** (Located in...

CHSC stainless steel empty can washer, 64 in long, with can inverter and decline, 154 in long. ** Rigging Fee: $175 ** (Located in: Archbold, OH)

SS dry pasta tote dump, with hydraulic power pump and tank, 112 in pivot height, 42 in wide. ** Rigging Fee: $200 ** (Located in: Archbold, OH)

SS tote dump hopper with vibratory bottom feeder, bin 60 x 60 x 48 in tall. ** Rigging Fee: $200 ** (Located in: Archbold, OH)

Reclaim can magnetic elevator, with infeed spiral, 180 in tall and 60 in crossover, with ladder and platform. ** Rigging Fee: $250 ** (Located in:...

Reclaim can gravity decline, approximately 30 ft long. ** Rigging Fee: $150 ** (Located in: Archbold, OH)

SS pasta incline conveyor, sanitary belt, 13 in wide x 244 in long from ground level to 72 in discharge hight, with magnet over belt. ** Rigging F...

Zacmi pasta pocket filler, model 0233-T-048, s/n 232, 48 pocket, 80 in diameter with timing infeed, safety cage, motor and drive, SS control panel...

SS Arrowhead can conveyor, 4 1/2 in plastic table top chain belt, 34 ft total length, 27 ft straight to left 90 degree then 5 ft straight, motor a...

SS Arrowhead can conveyor 90 degree turn section, motor and drive. (incomplete) ** Rigging Fee: $150 ** (Located in: Archbold, OH)

SS Arrowhead can conveyor, 7 1/2 in plastic table top chain belt, approximately 50 feet straight, with motor and drive. (5 pieces total with belt ...

SS Arrowhead can conveyor, parts including 180 degree left with a 50 in radius, motor and drive, no belt. (3 pieces) ** Rigging Fee: $150 ** (Loca...