47
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
Accept Cookies Learn MoreLot
47
Larger Shipping items we recommend www.mbebrighton.co.uk
By Order of Secured Creditor - Major Fabrication & Machinery Auction
Live and Online Bidding!
Auction Date: Thursday, July 18, 2019 at 9:00 am CDT
Location: 3206 Hershey Ave. Bldg B Muscatine, Iowa
Inspection: July 17, 8:00-5:00PM (or by appointment).
Removal:
Buyers are responsible to remove all purchases at Buyers expense and according to date and time restrictions. All items must be paid for in full according to Payments Terms and Conditions. Removal will begin on July 18, 2019. There will be no removal on Sunday, July 21, 2019. Removal will resume on Monday, July 22, 2009, from 8:00 a.m. - 6:00 p.m. Purchased items need to be removed July 31,2019.
The air compressors have a delayed delivered date.
Shipping and Handling: Buyers desiring to have purchases prepared for shipping will be charged a fee of $40.00 per hour (one hour minimum) plus the cost of materials for boxing or crating. Payment must be completed before shipping commences. Buyer is responsible for all shipping arrangements.
Buyer’s Premium: 18% Buyers premium online.
Day 2 - Featuring:
Tube mill:
AEF Tube mill, 2"x.038", components: 1) decoil reel, 12" width, 48" diameter, 2-sided, this works with the tube mill; 2) pneumatic cut-off station with a pneumatic knife approximately 8" width; 3) Kent Corporation continuous accumulator, model R22LE, s/n 9131RB, hydraulic type, designed to keep a continuous feed of coiled steel into the former, approximately 84" diameter, freestanding, hydraulic control; 4) roll forming station, (6) stand with 1" arbors, direct drive, powered by a Reliance AC motor, 400 hp motor, s/n W328123T1-HY, 500 volt; Induction welding station powered by a SF– GGP solid-state high-frequency power supply, which was purchased new in 2017, 5) cooling and lubrication station, appears to be custom built with (20) coolant nozzles, this station is approximately 13' length; 6) AEF 4-stand straightener, 1" diameter arbors, Reliance AC motor, 30 hp motor, type TR, s/n U326925TL2-LX, 500 volt, 49 amp; 7) flying cut-off, Alpha Press machine FR-8-Z-30, s/n 47, capacity is 2.00 OD, .083 wall, 48" traveling head, Includes Talleyrand PLC control,8) collection table, maximum length 20', (2) freestanding control panels, it does have a central control panel with Siemens controls, Series Simoreg. Sells with owners confirmation.
Addison Tube mill, This line consists of the following components: (1) Kent Corporation double-sided decoy reel 2001 model S Kd 6000, serial number 3197/ADD UNC1, 6000 pound capacity, minimum ID17 inches, maximum ID 21 inches, maximum coil width 12 inches, maximum coil OD 60 inches, pneumatic brake; 1) Fronius tig welder with watercooled torch, (1) manual flat sheer, (1) first stage forming Addison seven stand with edge alignment between each stand, 1 1/2 inch arbors, manual adjustment, each stand is powered, also includes; (1) E FD welder Elva Induksjon power supply model IMC 150/1.8 – 300, serial number 100333, new in 2001, input voltage 640, output voltage 1152, 150 KW, includes a sizing station after welder; (1) Rotary scarf station, (1) next station is a cooling tunnel approximately 10 foot length, next station (1) is an Addison sizing forming station three stands with horizontal sizing roles, includes an additional sizing station; (1) Alpha Thermo tool flying cut off with control PLC control, (1) final collection rack. This entire system is controlled by an Addison control station model AM – 2250 – U serial number 1036. Thisl ine sells with owners confirmation.
2013 Gasparini tube mill was originally designed for the production of 1½ inch thin wall tube. This machine is currently nonfunctioning, it has been partially disassembled. Contact Auction company for details.
2013 Gasparini roll former Model TRO 65 SI, TI PO 1.T.S.1,Consisting of the following components (1) decoy real; leveling and straightening station, manual type; (thirteen) stand roll forming 1 ½” arbors, currently is set to form angle iron, next station is the cutoff, Currently this line needs maintenance and troubleshooting on the control before it can be put back into production.
CNC Press Brake:
2015 Cincinnati model 90 PDF Plus 8, Pro Forma series, five axis control, Press brake, s/n 55695, 8" stroke, 90-ton capacity, 10' overall, 8'6" between the housings, 4" die rail, freestanding control panel, color touch screen, Link Lite Black Max safety lighting has very good eye appearance.
CNC Laser
2009 Cincinnati model CL6 Co2 Laser, s/n 54289, 5'x10' GE Fanuc laser control, resonator C2000I-model B, 35068 hours on the meter for the resonator, (2) cutting tables with shuttle relay, Windows based control, 2,000 watt, includes the coolant Koolant Koolers water cooler model HCV7/500PR-NF -FILT, s/n 29699, hp is 7.5, PLC control, there is no dust collector, includes a transformer.
CNC VMC
2011 Haas Vertical machining center, model VF-3SS, s/n 1082247, 360/480 volt, 3-phase, the table is 20"x48", has flush coolant, carousel side mounted tool changer, 24-tool, chip auger, high pressure coolant. Rigid tapping, macros, rotational and scaling, M19 spindle orientation, 12000 RPM, CAT 40 spindle, no 4th axis wired, x axis 40, Y 20" Z 25",.
CNC Router
2007 Haas model GR510 Master Cam Vertical machining center/Router, gantry type, s/n 1054118, Vector drive 20/15 hp, X axis 121", Y axis 61", Z axis 11", spindle nose to table maximum 13.5", spindle nose to table minimum 2.5", has coolant, the table is 53" left/right, 122" front/back, this is not a T-slotted table it is a milled table with tapped holes, 62" between columns, 15Hp spindle, maximum 10000 RPM, Haas control, 3-axis machine, it does have the wiring for the 4th axis, has good eye appearance, 10-tool automatic tool changer with CAT 40 tool holders.
CNC Robotic Welder
2015 Fanuc robotic welding cell, consisting of the following: (1) Fanuc robot type AO5B – 2611 – B122, F161700, serial number E15230775, (yellow in color) (1) Lincoln power reaming tip cleaner, (1) Lincoln electric automation solution indexing stations current fixture size 8’ x 46”, (1) Fanuc teach pad, type a 5B – 225 – C105 EAW, (1) Lincoln power supply R500 power supply, serial number U1150806325, Slick light curtain safety cage.
CNC Angle Roller
2007 Tauring model Delta 60 CNC -C angle roll, 3-bar, s/n 060D-621, takes up to 6" diameter roll OD, freestanding programmable control, has good eye appeal, appears to be in good condition. Currently needs repair.
1997 Tauring angle roll, model SE-CNCS- 2-OM- Delta 40 CNCS 3-bar, s/n 179, freestanding push button control, CNC-S programmable PLC control, assorted rolls, appears to be in good condition.
CNC Tube Benders
1989( Refurbished in 2016) Eaton Leonard CNC tube bender, model Vector bend, SN VB200HP-R-004-MTL-12-89, hydraulic mandrel, 3" maximum OD, the machine was complete refurbished and a new control was added, the control is a BendPro G2, freestanding, touch screen.
Too much to list!!! Do not miss this sale.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms & Conditions
Removal: Buyers are responsible to remove all purchases at Buyers expense and according to date and time restrictions. All items must be paid for in full according to Payments Terms and Conditions. Removal will begin on July 18, 2019. There will be no removal on Sunday, July 21, 2019. Removal will resume on Monday, July 22, 2009, from 8:00 a.m. - 6:00 p.m. Purchased items need to be removed July 31,2019.
The air compressors have a delayed delivered date.
Shipping and Handling: Buyers desiring to have purchases prepared for shipping will be charged a fee of $40.00 per hour (one hour minimum) plus the cost of materials for boxing or crating. Payment must be completed before shipping commences. Buyer is responsible for all shipping arrangements.
Buyer’s Premium: 15% Buyer’s Premium will be added to all successful bid amounts. 18% Buyers premium online.
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
General delivery information available from the auctioneer
Larger Shipping items we recommend www.mbebrighton.co.uk
By Order of Secured Creditor - Major Fabrication & Machinery Auction
Live and Online Bidding!
Auction Date: Thursday, July 18, 2019 at 9:00 am CDT
Location: 3206 Hershey Ave. Bldg B Muscatine, Iowa
Inspection: July 17, 8:00-5:00PM (or by appointment).
Removal:
Buyers are responsible to remove all purchases at Buyers expense and according to date and time restrictions. All items must be paid for in full according to Payments Terms and Conditions. Removal will begin on July 18, 2019. There will be no removal on Sunday, July 21, 2019. Removal will resume on Monday, July 22, 2009, from 8:00 a.m. - 6:00 p.m. Purchased items need to be removed July 31,2019.
The air compressors have a delayed delivered date.
Shipping and Handling: Buyers desiring to have purchases prepared for shipping will be charged a fee of $40.00 per hour (one hour minimum) plus the cost of materials for boxing or crating. Payment must be completed before shipping commences. Buyer is responsible for all shipping arrangements.
Buyer’s Premium: 18% Buyers premium online.
Day 2 - Featuring:
Tube mill:
AEF Tube mill, 2"x.038", components: 1) decoil reel, 12" width, 48" diameter, 2-sided, this works with the tube mill; 2) pneumatic cut-off station with a pneumatic knife approximately 8" width; 3) Kent Corporation continuous accumulator, model R22LE, s/n 9131RB, hydraulic type, designed to keep a continuous feed of coiled steel into the former, approximately 84" diameter, freestanding, hydraulic control; 4) roll forming station, (6) stand with 1" arbors, direct drive, powered by a Reliance AC motor, 400 hp motor, s/n W328123T1-HY, 500 volt; Induction welding station powered by a SF– GGP solid-state high-frequency power supply, which was purchased new in 2017, 5) cooling and lubrication station, appears to be custom built with (20) coolant nozzles, this station is approximately 13' length; 6) AEF 4-stand straightener, 1" diameter arbors, Reliance AC motor, 30 hp motor, type TR, s/n U326925TL2-LX, 500 volt, 49 amp; 7) flying cut-off, Alpha Press machine FR-8-Z-30, s/n 47, capacity is 2.00 OD, .083 wall, 48" traveling head, Includes Talleyrand PLC control,8) collection table, maximum length 20', (2) freestanding control panels, it does have a central control panel with Siemens controls, Series Simoreg. Sells with owners confirmation.
Addison Tube mill, This line consists of the following components: (1) Kent Corporation double-sided decoy reel 2001 model S Kd 6000, serial number 3197/ADD UNC1, 6000 pound capacity, minimum ID17 inches, maximum ID 21 inches, maximum coil width 12 inches, maximum coil OD 60 inches, pneumatic brake; 1) Fronius tig welder with watercooled torch, (1) manual flat sheer, (1) first stage forming Addison seven stand with edge alignment between each stand, 1 1/2 inch arbors, manual adjustment, each stand is powered, also includes; (1) E FD welder Elva Induksjon power supply model IMC 150/1.8 – 300, serial number 100333, new in 2001, input voltage 640, output voltage 1152, 150 KW, includes a sizing station after welder; (1) Rotary scarf station, (1) next station is a cooling tunnel approximately 10 foot length, next station (1) is an Addison sizing forming station three stands with horizontal sizing roles, includes an additional sizing station; (1) Alpha Thermo tool flying cut off with control PLC control, (1) final collection rack. This entire system is controlled by an Addison control station model AM – 2250 – U serial number 1036. Thisl ine sells with owners confirmation.
2013 Gasparini tube mill was originally designed for the production of 1½ inch thin wall tube. This machine is currently nonfunctioning, it has been partially disassembled. Contact Auction company for details.
2013 Gasparini roll former Model TRO 65 SI, TI PO 1.T.S.1,Consisting of the following components (1) decoy real; leveling and straightening station, manual type; (thirteen) stand roll forming 1 ½” arbors, currently is set to form angle iron, next station is the cutoff, Currently this line needs maintenance and troubleshooting on the control before it can be put back into production.
CNC Press Brake:
2015 Cincinnati model 90 PDF Plus 8, Pro Forma series, five axis control, Press brake, s/n 55695, 8" stroke, 90-ton capacity, 10' overall, 8'6" between the housings, 4" die rail, freestanding control panel, color touch screen, Link Lite Black Max safety lighting has very good eye appearance.
CNC Laser
2009 Cincinnati model CL6 Co2 Laser, s/n 54289, 5'x10' GE Fanuc laser control, resonator C2000I-model B, 35068 hours on the meter for the resonator, (2) cutting tables with shuttle relay, Windows based control, 2,000 watt, includes the coolant Koolant Koolers water cooler model HCV7/500PR-NF -FILT, s/n 29699, hp is 7.5, PLC control, there is no dust collector, includes a transformer.
CNC VMC
2011 Haas Vertical machining center, model VF-3SS, s/n 1082247, 360/480 volt, 3-phase, the table is 20"x48", has flush coolant, carousel side mounted tool changer, 24-tool, chip auger, high pressure coolant. Rigid tapping, macros, rotational and scaling, M19 spindle orientation, 12000 RPM, CAT 40 spindle, no 4th axis wired, x axis 40, Y 20" Z 25",.
CNC Router
2007 Haas model GR510 Master Cam Vertical machining center/Router, gantry type, s/n 1054118, Vector drive 20/15 hp, X axis 121", Y axis 61", Z axis 11", spindle nose to table maximum 13.5", spindle nose to table minimum 2.5", has coolant, the table is 53" left/right, 122" front/back, this is not a T-slotted table it is a milled table with tapped holes, 62" between columns, 15Hp spindle, maximum 10000 RPM, Haas control, 3-axis machine, it does have the wiring for the 4th axis, has good eye appearance, 10-tool automatic tool changer with CAT 40 tool holders.
CNC Robotic Welder
2015 Fanuc robotic welding cell, consisting of the following: (1) Fanuc robot type AO5B – 2611 – B122, F161700, serial number E15230775, (yellow in color) (1) Lincoln power reaming tip cleaner, (1) Lincoln electric automation solution indexing stations current fixture size 8’ x 46”, (1) Fanuc teach pad, type a 5B – 225 – C105 EAW, (1) Lincoln power supply R500 power supply, serial number U1150806325, Slick light curtain safety cage.
CNC Angle Roller
2007 Tauring model Delta 60 CNC -C angle roll, 3-bar, s/n 060D-621, takes up to 6" diameter roll OD, freestanding programmable control, has good eye appeal, appears to be in good condition. Currently needs repair.
1997 Tauring angle roll, model SE-CNCS- 2-OM- Delta 40 CNCS 3-bar, s/n 179, freestanding push button control, CNC-S programmable PLC control, assorted rolls, appears to be in good condition.
CNC Tube Benders
1989( Refurbished in 2016) Eaton Leonard CNC tube bender, model Vector bend, SN VB200HP-R-004-MTL-12-89, hydraulic mandrel, 3" maximum OD, the machine was complete refurbished and a new control was added, the control is a BendPro G2, freestanding, touch screen.
Too much to list!!! Do not miss this sale.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms & Conditions
Removal: Buyers are responsible to remove all purchases at Buyers expense and according to date and time restrictions. All items must be paid for in full according to Payments Terms and Conditions. Removal will begin on July 18, 2019. There will be no removal on Sunday, July 21, 2019. Removal will resume on Monday, July 22, 2009, from 8:00 a.m. - 6:00 p.m. Purchased items need to be removed July 31,2019.
The air compressors have a delayed delivered date.
Shipping and Handling: Buyers desiring to have purchases prepared for shipping will be charged a fee of $40.00 per hour (one hour minimum) plus the cost of materials for boxing or crating. Payment must be completed before shipping commences. Buyer is responsible for all shipping arrangements.
Buyer’s Premium: 15% Buyer’s Premium will be added to all successful bid amounts. 18% Buyers premium online.