Assorted taps, various sizes and types, have been removed from drawer.

Assorted drill’s, various sizes, including 41/64, 17/32, 29/64, 13/32, 3/8, 23/64, 11/32, 5/18, 15/32, 1/2, 27/64.

Assorted taps, various sizes and types, all in good condition.

Taps 1 1/4 “, assorted types, brand names.

Adapter sleeves, assorted lengths with collets.

Tabs assorted sizes 3/4" by 20 NEF.

Assorted taps, 3/8" by 16 BH, 3/8“ x 16, 5/16" x 18 BH, 3/8“ x 16 NC, 1/4“ x 20 NC.

Carbide tipped drills, 16.5 mm, tapered shanks and assorted drills.

Carbide tipped drills, metric size, O and P, assorted brand names and sizes.

Assorted taps metric M 10 x 1.5 D, 10 - 24BH, M 8 x 1.25 mm, M 8 x 1.2 5P, M 8 x 1.25 PD.

Assorted drill bits, Amita special, .345X .5625, various types and sizes , many are 9/16.

Assorted taps 8-32PH, 6 -32PH, 10 -24 3N.

Approximately 25 carbide tipped drills, straight shank, 13.65 mm, quantity of non carbide tipped spotting drill bits.

(1) Cat 50 tool holder v.6 -0297-9862 2 with specialty head, numbers on the head plate read V -B0 287–9860 - 8.

OPEN

(1) Cat 50 tool holder ID 0297–9860 - 2, with specialty head, plate marked V – B, 0297–9860 - 8.

Tap extensions 1/4" tap extension, 5/16 inch tap extension.

Assorted lot, taps, quick change collets.

Assorted taps 1/16 NPT, 1/8 and PS, 1/8 in PT, 1/4 NPT, 3/8 NPT, 1/2" NPS, 1/2" NPT, 3/4" NPS, 3/4" NPT, 1" NPT, 1 1/4" NPS, 1 1/4" NPT.

High speed drills, assorted sizes.

Assorted metric drills, high speed, and carbide tipped, various sizes including 6.5 mm, 8.5 mm, 14 mm, 16 mm.

Assorted taps 9/16 x 18 NF high speed, 5/8“ x 11 4 flute bottom.

Taps 5/8–11 NC, left hand.

Taps 1 1/4“ x 11 1/2 PTF short.

Metric taps 1/4 by .240 27 NPSF, 1 mm, 1.25 mm, 1.50 mm, 1.75 mm.

Carbide thread mills various sizes, 1.125, 5/8 x 11 bottom taps, 5/8 x 11 heavy duty bottom, quantity of taps, mixed lot.

(1) Cat 50 tool holder command c6x4-0006 , head is marked per-2262ntm.

(1) CAT50 tool holder cline tool ct-58744-REV A / REV B, insert type.

CAT 50 tool holders, thread mill 1- 5PD .913 HSS furniture finisher 1/8 - 27 NPSF, ecu thread 856 carbide, mixed lot.

ACME tandem taps .922, .902, PD .915, N242323, .919.

Metric drills, various sizes including number 1 split drill, letter O 14 mm, and assorted type.

Mixed lot and assorted metric taps : M2X .40, M3.5 X .60, Taps, metric, M5X .80, M6X1 bottom, M 6 x 1 spiral point, M 8 x 1.25 bottom, M 8 x 1.2...

Assorted end mills, 13/16, 7/8,.746 diameter, mixed sizes , various brand names, mixed lot, several re carbide.

Taps metric M 16 x 2.0, M 16 by 2 coolant, M 18 x 1.5, M 18 x 1.5 LH, M 18 x 2.5, M 20 x 1.5, M 20 x 2.5, M 22 x 1.5, M 24 x 1.5, assorted and m...

(1) CAT 50 tool holder, U-head , D`Andrea U center, 21.4.50.01.050.01.

Metric taps M 24 x 3.0, M 24 x 3.0 with coolant through, M 30 x 2.0, M 8 x 1.25 with coolant through other assorted thread mills, mixed lot.

English measurement taps, 18 -27NPS poly 1 5/8–8 left hand 1 5/8–8 1 1/2–6 left hand 3/8–16 coolant through, 3/8–16 pulley, 1 1/2–6, mixed lot.

Pneumatic abrasive tools replacement disks, service parts, abrasive wheels, mixed lot.

Coolant nozzles parts.

Coolant nozzle parts.

Air line fittings nozzle ends 1/4" ferrules 1/4" plugs, 1/4 x 1/4 couplers, 1/2 x 1/2 couplers, 1/4" fittings, nipples, plugs, quick connects.

Air line fittings, shut off valves, couplers, elbows, sleeves, miscellaneous parts.

Cermet reamers 0.3915" to 0.3917“, 0.3956" to 0.3958“, .9936 number 16590 8-flute.

Cermet reamer various sizes, all in plastic tube container.

Cermet reamers, assorted sizes and types, all are in plastic tubes.

Cermet reamer 16281, 1.141, 16282, 1.181assorted sizes and types.

Cermet reamers 41.2900, 57.2100 mm, for 1.2950 mm, 57.2050 mm, 57.2052 mm, various sizes.

Brunswick reamers 63.5808 mm, 63.5780 mm, 63.5823 mm, 63.5766 mm, 63.5810 mm, 63.5800 mm, 63 point 5754 mm.

(1) CAT 50 tool holder U center, parts.

Tapmatic QC chuck thru spindle coolant, Brunswick reamers, 1.2940 mm, 1.2961 mm, 1.2911 mm, 3/8 24 x 1/2" socket set screw, other miscellaneou...

Precision components, compensator chucks CMP - .750, CMP 40 - 1.000, CMP– 1.000 CMP – 1.250, CMP - LRX, CMP – .750.

Brunswick reamers, 1.2950, 41.2940, 41.2920 mm, 1.2901 mm, 1.2941 mm, 1.2900 mm, 41.2920 mm, 1.2910 mm, 1.2900 mm, 41.2950 mm.

Guhring drill bits, DS 1750 -5250 - 150–3 F.

Insert mill cutters, 2 flute, DS1562 - 3514–150.

Guhring insert cutters, various sizes, most require carbide insert, Sumiya drill WDX , Oscar bits.

Iscar, Dolfa, D’Andrea, insert facing mill cutters, various sizes and types.

Assorted mill cutters Iscar, Dolfa, D`Andrea, insert type, various sizes and types.

Assorted Valenite and Walter components, mixed lot mostly for boring heads.

Insert cutters, various sizes and types.

Cline roughing tools, CT .58523 R, 15872 R, CT .58295, CT .57 930, CT.65734, CT .58394, CT .59731, mixed lot.